RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. הקדמה

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. התקנה

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 פריקה ובדיקה ראשונית

• הסר בזהירות את כל הרכיבים מהאריזה.
• ודא שכל הפריטים המפורטים ברשימת האריזה נמצאים.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 חיבור הבקר

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Power over Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• מתאם מתח חיצוני: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• חיבורי מצלמה:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • בקרה טורית: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

תמונה 2.2: דוגמהample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 תצורת רשת

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web ממשק על ידי הזנת כתובת ה-IP שלו לתוך a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• בתוך ה web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. תפעול

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 נגמרview של בקרות

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

תמונה 3.2: מפורט view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 בחירת מצלמה

• כפתורי בחירה מהירה: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• לוח מקשים נומרי: For cameras beyond the quick select buttons (up to 255), press the מזהה CAM button, then enter the camera number using the numeric keypad, and press לְהַכנִיס.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 בקרת PTZ

• ג'ויסטיק: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• כפתור מהירות PT: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview מצב.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: הקש על פוקוס אוטומטי button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• BACKLIGHT Button: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 הגדרות קבועות מראש

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press לְהַכנִיס לשמור. ללחוץ ESC לצאת.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press לְהַכנִיס to recall. Press ESC לצאת.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 ניווט בתפריט

• לחצן MENU: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), לְהַכנִיס confirms selections, and ESC acts as a back button.

4. תחזוקה

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 ניקוי

• Use a soft, dry cloth to clean the exterior of the controller.
• עבור לכלוך עיקש, מעט דחוףampשוטפים את המטלית במים או בתמיסת ניקוי עדינה ולא שוחקת.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 אחסון

• כאשר אינו בשימוש למשך תקופות ממושכות, יש לאחסן את הבקר במקום קריר ויבש, הרחק מאור שמש ישיר וטמפרטורות קיצוניות.
• הגן על המכשיר מפני אבק ולחות.

5. פתרון תקלות

סעיף זה מספק פתרונות לבעיות נפוצות שאתה עשוי להיתקל בהן.

5.1 אין כוח

• בדוק את מקור החשמל: ודא שמתאם החשמל מחובר היטב גם לבקר וגם לשקע חשמל תקין.
• PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• שלמות כבל: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• קישוריות רשת: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• אי התאמה של פרוטוקול: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• מזהה מצלמה: Ensure the correct camera ID is selected on the controller.
• אישורי כניסה: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web מִמְשָׁק.
• חיבור טורי: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• קושחה: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webאתר לעדכונים.

5.3 LCD Display Issues

• אין תצוגה: ודא שהבקר מופעל.
• תצוגה עמומה: Check if there are any brightness settings on the controller that can be adjusted.

6. מפרטים

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. סרטון הדגמה של המוצר

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. אחריות ותמיכה

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webאֲתַר.

• יַצרָן: Xiamen RGBlink Science & Technology Co.,Ltd.
• רִשְׁמִי Webאֲתַר: www.rgblink.com (הערה: זהו מציין מיקום URL, please refer to your product packaging or official documentation for the correct support webאֲתַר.)
• מידע ליצירת קשר: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.