מדריך למשתמש של TRU COMPONENTS Signal Pillar TC-12835336

1. הקדמה

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the TRU COMPONENTS Signal Pillar, model TC-12835336. This device is designed for industrial signaling applications, featuring red and green LED indicators with continuous or flashing light modes and an IP65 protection rating.

2. מידע בטיחות

• קרא בעיון את כל ההוראות לפני ההתקנה וההפעלה.
• ההתקנה צריכה להתבצע רק על ידי צוות מוסמך.
• ודא שספק הכוח מנותק לפני ביצוע כל התקנה, תחזוקה או פתרון תקלות.
• ודא את הכרך הנכוןtage (24V) is supplied to prevent damage to the unit.
• Do not expose the device to conditions beyond its specified IP65 rating.
• הימנעו מחשיפה ישירה לעיניים לאור LED למשך תקופות ממושכות.

3. המוצר נגמרview

The TRU COMPONENTS Signal Pillar TC-12835336 is a robust signaling device with two LED segments (red and green) for clear visual indication in various industrial environments.

איור 1: TRU COMPONENTS Signal Pillar TC-12835336. This image displays the signal pillar with its black base, threaded mounting shaft, and two translucent LED segments: red on top and green below. A bundle of multi-colored wires extends from the base for electrical connection.

רכיבים:

• פלחי LED: Red and Green, providing visual status.
• דִיוּר: Durable black housing with a diameter of 55 mm.
• חוט הרכבה: להתקנה מאובטחת.
• רתמת חיווט: Multi-colored wires for power and control connections.

4. מפרטים

5. התקנה והתקנה

1. ניתוק חשמל: Ensure all power to the installation area is disconnected before beginning.
2. הַרכָּבָה: Securely mount the signal pillar using its threaded base. Ensure the mounting surface is stable and capable of supporting the device.
3. תִיוּל: Connect the signal pillar's wires to the appropriate 24V power supply and control system. Refer to the wiring diagram (if provided separately with the product) for specific connections for continuous or flashing modes. Typically, different wires control each LED segment and the flashing function.
4. חותם סביבתי: Ensure the IP65 rating is maintained after installation by properly sealing all connections and mounting points, especially in environments where dust or water ingress is a concern.
5. חיבור חשמל: Once all connections are secure and verified, restore power to the system.

6. הוראות הפעלה

The TRU COMPONENTS Signal Pillar operates by receiving a 24V signal to illuminate its LED segments. The specific wiring configuration determines whether a segment illuminates continuously or flashes.

• תאורה רציפה: Apply 24V to the designated wire for the desired LED segment (e.g., red or green) to achieve continuous illumination.
• תאורה מהבהבת: If wired for flashing operation, applying 24V to the corresponding wire will activate the flashing mode for that LED segment. Consult your system's wiring diagram for specific control signals.
• Multiple Segments: Both red and green segments can be activated independently or simultaneously, depending on the control system's design.

7. תחזוקה

The TRU COMPONENTS Signal Pillar is designed for low maintenance. Regular checks can ensure optimal performance.

• ניקוי: Periodically clean the exterior of the signal pillar with a soft, damp בַּד. אין להשתמש בחומרי ניקוי שוחקים או ממסים.
• בְּדִיקָה: Regularly inspect the housing and wiring for any signs of damage, wear, or loose connections.
• שלמות חותם: For IP65 rated protection, ensure all seals and cable glands remain intact and properly tightened.
• ניתוק חשמל: תמיד נתק את החשמל לפני ביצוע כל תחזוקה.

8. פתרון תקלות

אם שלבי פתרון הבעיות אינם פותרים את הבעיה, פנו לתמיכת הלקוחות או לטכנאי מוסמך.

9. אחריות ותמיכה

For information regarding warranty coverage, technical support, or replacement parts, please refer to the documentation provided with your purchase or contact TRU COMPONENTS customer service. Keep your purchase receipt as proof of purchase.

Manufacturer: TRU COMPONENTS