1. הקדמה
Thank you for choosing the pamo Industrial Design LAS 1 Standard Garment Rack. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new garment rack. Please read these instructions carefully before assembly and retain them for future reference.
Figure 1.1: The pamo Industrial Design LAS 1 Standard Garment Rack, fully assembled and in use.
2. מידע בטיחות
- ודא שכל הרכיבים קיימים ולא ניזוקו לפני תחילת ההרכבה. אין להשתמש אם חלקים חסרים או שבורים.
- Assemble the garment rack on a soft, clean surface to prevent scratches.
- אין לחרוג מקיבולת העומס המרבית של 60 ק"ג (175 פאונד). עומס יתר עלול לגרום לחוסר יציבות ולנזק.
- This product is designed for freestanding use. While stable, avoid climbing on or hanging from the rack.
- הרחיקו חלקים קטנים מהישג ידם של ילדים במהלך ההרכבה כדי למנוע סכנת חנק.
- בדקו מעת לעת את כל החיבורים כדי לוודא שהם נשארים מהודקים היטב.
3. תכולת החבילה
Verify that all the following components are included in your package. If any parts are missing, please contact customer support.
Figure 3.1: Illustration of typical components included in the package.
- Vertical Pipes (various lengths)
- Horizontal Pipes (various lengths)
- מחברי T
- מחברי מרפק
- Floor Flanges / Feet
- Non-slip Felt Pads
- מפתח משושה (מפתח אלן)
- הוראות הרכבה (מדריך זה)
4. התקנה והרכבה
The pamo Industrial Design Garment Rack features an easy screw system for straightforward assembly. No drilling into walls or floors is required for the freestanding model.
4.1. הכנה
- פנה שטח מרווח להתכנסות.
- פרוס את כל הרכיבים וזהה אותם באמצעות רשימת החלקים.
- Ensure the floor is protected, especially if assembling on delicate surfaces.
4.2. שלבי הרכבה
- חבר רגליים: Screw the floor flanges/feet onto the bottom ends of the vertical pipes. Ensure they are tightened securely. Apply the non-slip felt pads to the bottom of the flanges.
- Connect Vertical and Horizontal Pipes: Begin by connecting the lower horizontal pipes to the vertical pipes using T-connectors. Hand-tighten initially.
- בניית המסגרת: Continue connecting vertical and horizontal pipes using T-connectors and elbow connectors as per the specific design of your LAS 1 Standard model. Refer to the detailed diagrams provided in the included paper instructions for your specific configuration.
- חיבורים מאובטחים: Once the basic frame is assembled, use the provided hex key to firmly tighten all screw connections. Do not overtighten, but ensure all joints are snug to prevent wobbling.
- מיקום סופי: Carefully move the assembled garment rack to its desired location. The non-slip felt pads will protect your floor.
Figure 4.1: The easy screw system allows for straightforward assembly.
Figure 4.2: Detail of pipe clamping and floor protection with rubber feet.
5. הוראות הפעלה
The pamo Industrial Design Garment Rack is designed for organizing and storing clothing. Its robust construction allows for significant weight capacity.
- תליית בגדים: Use standard hangers to hang garments on the horizontal pipes. Distribute weight evenly to maintain stability.
- קיבולת משקל: The rack has a maximum load capacity of 175 pounds (60 kg). Avoid concentrating heavy items in one area.
- שימוש עצמאי: This model is designed to be freestanding. Ensure it is placed on a level surface. The non-slip felt pads provide stability and floor protection.
- מערכת הניתנת להרחבה: The modular design allows for future expansion or reconfiguration. Additional components can be purchased separately to adapt the rack to changing needs.
Figure 5.1: The modular system allows for expansion and customization.
6. תחזוקה
Proper care will ensure the longevity and appearance of your garment rack.
- ניקוי: נגבו את משטחי המתכת בעזרת מטלית רכהamp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the powder-coated finish.
- בְּדִיקָה: Periodically inspect all connections and joints for tightness. Re-tighten any loose screws using the hex key.
- Floor Pads: Check the non-slip felt pads for wear and tear. Replace them if they become damaged to continue protecting your floor.
Figure 6.1: The MatteGuard coating provides a durable, scratch-resistant surface.
7. פתרון תקלות
If you encounter any issues with your garment rack, refer to the following common problems and solutions.
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| המדף מתנדנד/לא יציב | Loose connections; uneven floor; overloaded | Tighten all screw connections. Ensure the rack is on a level surface. Redistribute weight or reduce load. |
| Pipes do not fit together | Incorrect orientation; debris in threads | Ensure pipes are aligned correctly. Check threads for any obstructions and clear if necessary. |
| שריטות על הרצפה | Missing or worn felt pads | Ensure felt pads are properly attached to all feet. Replace worn pads if necessary. |
8. מפרטים
| מותג | pamo |
| דֶגֶם | LAS 1 Standard (P-01-087) |
| צֶבַע | שָׁחוֹר |
| חוֹמֶר | Metal (Solid steel tubes, malleable cast iron fittings) |
| סוג גימור | Powder Coated (MatteGuard) |
| מידות המוצר (H x W x D) | Approx. 76.38" x 38.98" x 23.62" (194 cm x 99 cm x 60 cm) |
| סוג התקנה | עמידה חופשית |
| כושר העמסה | 175 פאונד (60 קילוגרם) |
| נדרשת הרכבה | כֵּן |
| תכונות מיוחדות | Easy to Install, Non-slip Felt Pads, Scratch-resistant |
Figure 8.1: Product dimensions for the LAS 1 Standard Garment Rack.
9. אחריות ותמיכה
For information regarding product warranty, please refer to the documentation provided with your purchase or visit the official pamo website. If you require assistance with assembly, have questions about product functionality, or need to report a missing/damaged part, please contact pamo customer support.
מידע ליצירת קשר: Please refer to the contact details provided on the product packaging or the official pamo webאתר לקבלת מידע התמיכה העדכני ביותר.
