מדריך הוראות לחצובת וידאו SmallRig AD-01S

מָבוֹא

The SmallRig AD-01S Video Tripod is a heavy-duty aluminum alloy tripod designed for DSLR cameras, camcorders, and other camera equipment. It features a fluid head for smooth pan and tilt movements, a dual-mode quick-release plate for versatile mounting, and adjustable legs with spiked feet for stability on various terrains. This manual provides detailed instructions for the proper setup, operation, and maintenance of your AD-01S Video Tripod.

תכונות מפתח

• התאמת גובה: Professional heavy-duty aluminum alloy tripod with built-in bubble level, high-strength aluminum alloy double-row tubes, and 75mm bowl bottom for enhanced stability. Adjustable height range: 85-187cm (34-74 inches).
• Professional Fluid Head: Features an adjustable stepless damping system for +90°/-75° tilt and a fixed counterbalance system for 360° smooth pan and tilt camera movements. The video head supports a load capacity of up to 6kg (13.2lb).
• Dual-Mode Quick-Release Plate Mount: Newly-designed snap-on quick-release plate mount compatible with DJI RS Series and 501PL quick release plates, allowing for quick switching between stabilizer and tripod shooting.
• Foot Spiked Design: Equipped with an anti-dislodgement foot spiked design. The spiked feet mode can be switched through rotating feet pads to adapt to different scenarios.
• Portability and Storage Convenience: Includes a pan bar suitable for both left-handed and right-handed users. The video head also features two anti-deflection 1/4"-20 threaded holes for accessories and a built-in wrench. Comes with a handbag for easy storage and transport.

תוכן החבילה

• 1 × Tripod Kit
• 1 × Allen Wrench
• 1 × Smartphone Holder
• 1 × שקית אחסון
• 1 × Guarantee Card

הוראות התקנה

1. פתיחת החצובה

Carefully remove the tripod from its storage bag. Release the leg-locking straps and gently extend the legs outwards until they are fully spread. Ensure the mid-level spreader is engaged for maximum stability.

Image: The SmallRig AD-01S Video Tripod shown both folded for transport and fully extended, alongside its dedicated carrying bag.

2. התאמת גובה

To adjust the tripod's height, locate the flip-locking systems on each leg. Open the locks, extend the leg sections to your desired height, and then firmly close the locks. The tripod can reach a maximum height of 187cm (74 inches).

Image: A visual guide demonstrating the various height adjustments of the tripod, from its minimum height of 84cm to its maximum height of 187cm.

3. חיבור המצלמה

The fluid head features a dual-mode quick-release plate mount. To attach your camera, first ensure the quick-release plate is securely fastened to the bottom of your camera. Then, align the plate with the mount on the fluid head and press it down until it snaps into place. Use the plate lock button to further secure it. The system is compatible with DJI RS Series and 501PL quick release plates.

Image: A detailed illustration of how to use the press-to-mount quick release system on the fluid head to attach a camera, highlighting the side button and locking knobs.

4. Leveling the Tripod

Utilize the built-in bubble level on the fluid head to ensure your tripod is perfectly level. Adjust the leg heights as needed until the bubble is centered.

5. Video Setup Overview

צפו בסרטון הרשמי הזה לקבלת סקירה מקיפהview of the SmallRig AD-01S tripod setup and features.

Video: An official SmallRig video showcasing the 74-inch Heavy Duty Tripod AD-01S, demonstrating its various features and ease of use.

הוראות הפעלה

1. Fluid Head Movements

The fluid head allows for smooth 360° panning and +90°/-75° tilting. Use the pan bar to control these movements. Adjust the tilt locking knob and tilt damping adjustment knob to achieve your desired resistance and fluidity for tilting. The pan locking knob controls the horizontal rotation.

Image: This image highlights the high-performance hydraulic damping system, showing the range of 360° pan and +90°/-75° tilt movements for smooth camera operation.

2. Quick Release Plate System

The dual-mode quick-release plate allows for rapid transitions. To switch between DJI RS Series and 501PL compatibility, rotate the switch specifications on the fluid head. This enables quick mounting and dismounting of your camera or stabilizer.

Image: A visual explanation of the quick switch mechanism on the fluid head, allowing compatibility with both DJI RS Series and MFT 501PL quick release plates.

3. Foot Adjustments

The tripod feet feature a spiked design for enhanced grip on soft or uneven surfaces. To switch between rubber feet and spiked feet, rotate the feet pads at the bottom of each leg. This adaptability ensures stability in various shooting environments.

תמונה: מפורט view of the tripod's built-in spikes, which can be revealed or retracted by rotating the feet pads, offering versatility for different ground conditions.

תַחזוּקָה

• ניקוי: Wipe down the tripod with a soft, dry cloth after each use to remove dust and debris. For stubborn dirt, use a slightly damp מטלית וסבון עדין, ולאחר מכן יבשו היטב. הימנעו מכימיקלים חזקים.
• סִיכָה: Periodically check the moving parts, especially the fluid head and leg locks, for smooth operation. If necessary, apply a small amount of silicone-based lubricant to ensure continued smooth movement.
• אִחסוּן: When not in use, collapse the tripod to its smallest form and store it in the provided carrying bag. Keep it in a cool, dry place away from extreme temperatures and humidity to prevent damage.
• בְּדִיקָה: Regularly inspect all screws, knobs, and levers to ensure they are tight and functioning correctly. Tighten any loose components with the provided Allen wrench.

פתרון בעיות

• Issue: Tripod is unstable.
  פִּתָרוֹן: Ensure all leg locks are fully engaged and the mid-level spreader is properly extended. Check that the feet pads are adjusted appropriately for the terrain (rubber for smooth surfaces, spikes for soft ground). Verify the camera is securely mounted on the quick-release plate.
• Issue: Fluid head movements are not smooth.
  פִּתָרוֹן: Check the tilt damping adjustment knob and pan locking knob. Ensure they are not overtightened or too loose. If movements remain stiff, a small amount of lubricant may be needed on the fluid head mechanism (refer to maintenance section).
• Issue: Quick-release plate is difficult to attach/detach.
  פִּתָרוֹן: Ensure the plate lock button is fully disengaged when attempting to remove the plate. When attaching, make sure the plate is correctly aligned with the mount and pressed firmly until it clicks. Verify the dual-mode switch is set to the correct plate type (DJI RS Series or 501PL).
• Issue: Legs are difficult to extend or retract.
  פִּתָרוֹן: Check the flip-locking systems on each leg. Ensure they are fully open before attempting to adjust the leg sections. Clean any dirt or debris from the leg sections that might be causing friction.

מפרט טכני

תמונה: סקירה מקיפהview of the SmallRig AD-01S tripod kit, including package contents and detailed technical specifications.

אחריות ותמיכה

For warranty information and customer support, please refer to the Guarantee Card included in your package or visit the official SmallRig webאתר. שמור את הוכחת הרכישה שלך עבור כל תביעת אחריות.