1. הקדמה
This manual provides comprehensive instructions for the safe and efficient use of the Creality Space PI Filament Dryer Plus and the Creality PLA Plus Filament. Please read this manual thoroughly before operating the device or using the filament to ensure optimal performance and longevity of your products.
Image 1.1: Creality Space PI Filament Dryer Plus and Creality PLA Plus Filament. This image displays the filament dryer unit alongside a spool of rainbow-colored PLA Plus filament and a 3D printed dragon model.
2. מידע בטיחות
יש להקפיד תמיד על אמצעי הזהירות הבאים כדי למנוע פגיעה או נזק למוצר:
- אין לחשוף את המכשיר למים או ללחות.
- הקפידו על אוורור נאות במהלך הפעולה.
- הרחק מהישג ידם של ילדים וחיות מחמד.
- השתמש רק במתאם החשמל המצורף.
- Do not open or attempt to repair the device yourself. Contact authorized service personnel.
- The heating element can become hot. Avoid direct contact during operation.
3. תכולת החבילה
ודא שכל הפריטים נמצאים בחבילה:
- Creality Space PI Filament Dryer Plus Unit
- מתאם מתח
- PTFE Tubes (2x)
- Creality PLA Plus Filament (1KG Rainbow)
- מדריך למשתמש (מסמך זה)
4. המוצר נגמרview
4.1. Dryer Components
Familiarize yourself with the main components of the Creality Space PI Filament Dryer Plus:
- מסך מגע LCD: Displays temperature, time, and filament type settings. Used for interaction and control.
- לחצני שליטה: לניווט בתפריטים והתאמת הגדרות.
- Filament Outlets: Two openings on the top for feeding filament to a 3D printer.
- תא חימום: Internal compartment where filament spools are placed for drying.
- PTC Heater: Efficient heating element for uniform drying.
- מאוורר פנימי: Circulates hot air 360° for consistent drying.
Image 4.1: LCD Touch Screen and Controls. This image highlights the dryer's LCD touch screen interface, showing temperature and time settings, and indicating one-key set functionality for various filaments.
5. התקנה
5.1. פורקים
הוצא בזהירות את כל הרכיבים מהאריזה. שמור את האריזה לאחסון או הובלה עתידיים.
5.2. חיבור חשמל
Connect the provided power adapter to the dryer unit and then plug it into a suitable power outlet.
5.3. טעינת נימה
The Space PI Filament Dryer Plus supports up to two 1KG filament spools simultaneously.
- Open the lid of the dryer unit.
- Place one or two filament spools onto the internal rollers. Ensure the filament unwinds smoothly.
- Thread the filament through the designated holes on the top of the dryer.
- Insert the PTFE tubes into the filament outlets to guide the filament to your 3D printer(s).
- סגור היטב את המכסה.
Image 5.1: Two Rolls Capacity Design. This image illustrates the dryer's capability to hold two 1KG filament spools, with filament being fed out through PTFE tubes to two separate 3D printers.
6. תפעול
6.1. הפעלה / כיבוי
Press the power button to turn the dryer on or off. The LCD screen will illuminate upon powering on.
6.2. Basic Drying Process
The dryer features one-key temperature settings for various filament types and allows for custom adjustments.
- בחר סוג פילמנט: On the LCD touch screen, choose the appropriate filament type from the pre-set options. The dryer supports up to 12 types, including PLA, ABS, TPU, PETG, PP, PC, PA, PET, PLA-CF, PA-CF, PETG-CF, and ASA.
- התאם טמפרטורה: The adjustable temperature range is 45°C to 70°C. You can use the pre-set values or manually adjust to your desired temperature.
- הגדר טיימר: The timer setting range is 0 to 48 hours. Select the recommended drying time for your filament or set a custom duration.
- התחלת ייבוש: Confirm your settings to begin the drying process. The PTC heater and internal fan will activate, circulating hot air 360° for uniform drying.
Image 6.1: Filament Compatibility and Recommended Drying Temperatures. This image displays the dryer's compatibility with 1.75mm and 2.85mm filaments and provides a table of recommended drying temperatures and times for various filament types.
Image 6.2: PTC Heater and 360° Hot Air Circulation. This image illustrates the internal PTC heating element and the fan-driven 360-degree hot air circulation system, designed for efficient and uniform filament drying.
6.3. Drying Multiple Filaments
When drying two spools, ensure both filaments are properly loaded and threaded through their respective PTFE tubes to their printers. The dryer will apply the selected settings to both spools.
7. Creality PLA Plus Filament Usage
7.1. Filament Characteristics
Creality Ender-PLA+ filament offers enhanced toughness and improved printing performance compared to standard PLA. Key characteristics include:
- Stronger Toughness: Less susceptible to breakage, allowing for repeated bending.
- Neat Winding: Full mechanical winding ensures tidy spools, reducing tangling and potential snaps.
- Improved Print Quality: Designed to minimize odor, bubbles, tangling, clogging, and cracking during printing.
Image 7.1: Creality PLA Plus Filament Benefits. This image lists the advantages of using Creality PLA Plus filament, including 'No Odor', 'No Bubble', 'No Tangling', 'No Clog', and 'No Cracking'.
Image 7.2: High Strength and Better Toughness. This image visually compares the flexibility and strength of Creality Ender PLA+ filament (shown bending without breaking) against common PLA filament (shown breaking easily).
Image 7.3: Neat Winding of Filament. This image demonstrates the precise and neat winding of the filament on the spool, highlighting an accuracy of ±0.02mm for the 1.75mm diameter.
7.2. Recommended Printing Parameters for PLA Plus
For optimal results with Creality PLA Plus filament, consider the following printing parameters:
- Extruder Temperature: 190-230 מעלות צלזיוס
- Hotbed Temperature: No heating - 60°C
- מהירות הדפסה: 40-100 מ"מ לשנייה
Image 7.4: Recommended Print Parameters for PLA Plus. This image displays the recommended extruder temperature (190-230°C), hotbed temperature (No heating - 60°C), and printing speed (40-100mm/s) for Creality Ender-PLA+ filament.
8. תחזוקה
8.1. ניקיון
To maintain the dryer's performance and appearance:
- ודא שהמכשיר כבוי ומנתק לפני הניקוי.
- נגב את החלק החיצוני עם מטלית רכה ויבשה.
- אין להשתמש בחומרי ניקוי שוחקים או ממסים.
- Periodically check the filament path for any debris and clear as needed.
8.2. אחסון
When not in use, store the dryer in a cool, dry place away from direct sunlight. If storing for extended periods, consider using the original packaging.
9. פתרון תקלות
אם נתקלת בבעיות, עיין בבעיות הנפוצות ובפתרונות הבאות:
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| Dryer does not power on | אין ספק כוח; מתאם חשמל פגום | Check power connection; Try a different outlet; Contact support if adapter is faulty. |
| פילמנט לא מתייבש ביעילות | Incorrect temperature/time settings; Overly saturated filament | Verify settings against recommended values (Section 6.2); Extend drying time. |
| Filament tangling inside dryer | Improper loading; Filament cross-wound | Ensure filament is loaded correctly and unwinds freely; Manually untangle if necessary. |
| התצוגה לא מגיבה | תקלה זמנית בתוכנה | כבה והפעל מחדש את המכשיר. |
10. מפרטים
10.1. Creality Space PI Filament Dryer Plus
- יְכוֹלֶת: 2 rolls of 1KG filament spools
- סוג מחמם: 110W PTC Heater
- מחזור אוויר: 360° hot air circulation with built-in fan
- טווח טמפרטורות: 45°C - 70°C
- טווח טיימר: שעה וחצי עד שעתיים
- תאימות נימה: Supports 12 types including PLA, ABS, TPU, PETG, PP, PC, PA, PET, PLA-CF, PA-CF, PETG-CF, ASA. Compatible with 1.75mm and 2.85mm diameter filaments.
- משקל פריט: Approximately 2.2 pounds (unit only)
10.2. Creality PLA Plus Filament (1KG Rainbow)
- חוֹמֶר: Polylactic Acid (PLA+)
- משקל נטו: 1 קילוגרם
- קוֹטֶר: 1.75mm (typical, check spool for exact)
- Diameter Accuracy: ±0.02 מ"מ
- צֶבַע: קֶשֶׁת
11. אחריות ותמיכה
For warranty information, technical support, or service inquiries, please contact Creality customer support through their official website or the retailer where the product was purchased. Please have your product model and purchase date available when contacting support.
