מדריך למשתמש של תיבת ייבוש נימים למדפסת תלת מימד רב-צבעית Anycubic ACE Pro עבור סדרת Kobra 3 Max

1. הקדמה

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Anycubic ACE Pro Multi Color 3D Printer Filament Dryer Box. The ACE Pro is designed to enhance your 3D printing experience by enabling multi-color printing, ensuring optimal filament conditions, and providing intelligent filament management features. This device is specifically compatible with the Anycubic Kobra 3 Max series 3D printers.

Figure 1: Anycubic ACE Pro Multi Color 3D Printer Filament Dryer Box, front view with four filament spools visible.

2. מידע בטיחות

Please read and understand all safety instructions before operating the Anycubic ACE Pro. Failure to follow these instructions may result in injury or damage to the product.

• Ensure the device is connected to a power source that matches the specified voltagדרישות ה.
• אין לחשוף את המכשיר למים או ללחות מוגזמת.
• הרחק את המכשיר מחומרים דליקים.
• Do not attempt to open or repair the device yourself. Contact customer service for assistance.
• יש לוודא אוורור נאות סביב המכשיר במהלך הפעולה.

3. תכונות מוצר

The Anycubic ACE Pro integrates several advanced features to optimize your 3D printing workflow.

3.1 Multi-Color Printing Capability

The ACE Pro enables multi-color printing. A single ACE Pro unit supports 4-color printing. For 8-color printing, two ACE Pro units can be connected along with an 8-Color Filament Hub (available June 2025).

Figure 2: A single Anycubic ACE Pro unit connected to a 3D printer, demonstrating 4-color printing capability.

3.2 Filament Drying System

Equipped with a dual PTC heating system (up to 200W), the ACE Pro efficiently circulates air and maintains a consistent temperature of up to 131°F (55°C). This ensures filaments remain dry, preventing common printing issues caused by moisture.

Figure 3: Illustration of the ACE Pro drying filament while printing, showing improved print quality with dried filament.

3.3 Nozzle Clog Detection

The built-in buffer system detects nozzle clogs, pausing the print and alerting the user. This feature helps protect your 3D printer and prevents print failures.

Figure 4: Visual representation of the ACE Pro's nozzle clog detection system, showing an alert on the printer screen.

3.4 Filament Auto Backup

The ACE Pro automatically transitions to the next spool of the same color and material when one spool runs out. This ensures uninterrupted printing and maximizes filament usage.

Figure 5: Diagram illustrating the filament auto-backup feature, showing automatic switching between spools.

3.5 Intelligent Identification Sync

When used with Anycubic's intelligent identification filaments, the ACE Pro can automatically recognize filament types and colors, streamlining the printing process.

Figure 6: Screen interface showing intelligent identification of filament type (PLA) and color.

3.6 Optimal Storage Design

The sealed design of the ACE Pro maintains a dry environment for your filaments, protecting them from humidity and ensuring they remain in optimal condition for printing.

איור 7: חתך view of the ACE Pro demonstrating its sealed storage design, protecting filaments from moisture.

4. מדריך התקנה

4.1 פירוק

1. Carefully remove the ACE Pro unit from its packaging.
2. Inspect the unit for any signs of damage. If damaged, contact customer support.
3. Ensure all components are present (ACE Pro unit, power adapter, connection cables).

4.2 Connecting to Kobra 3 Max

1. Place the ACE Pro unit near your Anycubic Kobra 3 Max 3D printer.
2. Connect the provided data cable from the ACE Pro to the designated port on your Kobra 3 Max printer.
3. Connect the power adapter to the ACE Pro and plug it into a power outlet.
4. Power on both the ACE Pro and the 3D printer.

4.3 טעינת נימה

1. Open the lid of the ACE Pro.
2. Place up to four filament spools onto the designated holders inside the unit.
3. Feed the filament ends through the respective guide tubes.
4. סגור היטב את המכסה.
5. Follow your 3D printer's instructions to load the filament into the extruder from the ACE Pro's output tubes.

5. תפעול

5.1 Initiating Multi-Color Prints

Once connected to your Kobra 3 Max, the ACE Pro will be recognized. Prepare your multi-color 3D model in your slicing software, assigning different colors to different parts or layers. The ACE Pro will manage filament switching automatically during the print.

5.2 Using the Filament Drying Function

The ACE Pro offers preset humidity parameters for various filament types. Select the desired filament type on the ACE Pro's interface or through the connected 3D printer's controls. The unit will then activate its heating system to dry the filament to optimal conditions.

Figure 8: Chart displaying optimal drying temperatures and times for various filament types like ABS, PLA, and PETG.

5.3 Filament Management (Backup & Identification)

The ACE Pro continuously monitors filament levels. When a spool is nearing depletion, the auto-backup feature will seamlessly switch to another loaded spool of the same material and color, if available. For Anycubic's intelligent identification filaments, the system automatically detects and displays filament information, ensuring correct usage.

6. תחזוקה

• ניקוי: Periodically wipe the exterior of the ACE Pro with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Filament Path: Ensure the filament guide tubes are clear of debris.
• אִחסוּן: When not in use for extended periods, ensure all filament is properly stored, and the ACE Pro is powered off.

7. פתרון תקלות

8. מפרטים

9. אחריות ותמיכה

The Anycubic ACE Pro for Anycubic Kobra 3 Max comes with a אחריות ל-3 חודשים מתאריך הרכישה. אחריות זו מכסה פגמי ייצור ומבטיחה את אמינות המוצר.

For technical assistance, troubleshooting, or warranty claims, please contact Anycubic customer service. Our support team is available 24/7 לסייע לך.

מידע ליצירת קשר: Please refer to the official Anycubic webבאתר או במסמכי הרכישה שלך לקבלת פרטי הקשר העדכניים ביותר של שירות הלקוחות.