מדריך למשתמש לבדיקת כבלי רשת NOYAFA NF-859GS

1. הקדמה

The NOYAFA NF-859GS is a multi-functional network cable tester designed for comprehensive network and telephone line inspection. It integrates various testing capabilities including Power over Ethernet (PoE) detection, RJ45 and RJ11 cable testing for CAT5, CAT5E, CAT6, and CAT6A cables, continuity detection, cable length measurement, and cable tracking. This manual provides detailed instructions for the safe and effective operation of your device.

2. מידע בטיחות

Please read all safety warnings and instructions carefully before using this product to prevent electric shock, fire, or injury. Keep this manual for future reference.

• אין להשתמש במכשיר ליד מים או ב-damp סביבות.
• Ensure the device is powered off before connecting or disconnecting cables.
• אל תנסה לתקן או לשנות את המכשיר בעצמך. יש לפנות לכל טיפול וטיפול באנשי מקצוע מוסמכים.
• השתמשו רק באביזרים ובמקורות חשמל שצוינו.
• הימנע מחשיפת המכשיר לטמפרטורות קיצוניות או לאור שמש ישיר.
• Always wear appropriate personal protective equipment when working with electrical systems.

3. תכולת החבילה

ודא שכל הפריטים נמצאים ובמצב תקין בעת ​​הוצאת האריזה:

• NF-859GS Main Tester Unit
• NF-859GS Receiver Unit
• כבל מתאם RJ45
• כבל מתאם RJ11
• כבל קליפ תנין
• מדריך למשתמש
• נרתיק נשיאה

4. המוצר נגמרview

The NF-859GS consists of a main tester unit with an LCD display and control buttons, and a receiver unit for cable tracing and identification.

איור 4.1: NOYAFA NF-859GS Network Cable Tester main unit and receiver. The main unit features an LCD screen and navigation buttons, while the receiver unit has LED indicators for signal strength and cable identification.

4.1 Main Tester Unit

• תצוגת LCD: Shows test results, cable status, length, and other relevant information.
• יציאת RJ45: לבדיקת כבלי Ethernet.
• יציאת RJ11: לבדיקת קווי טלפון.
• לחצני שליטה: Power, Left, Enter, Right, ESC for navigation and function selection.

4.2 יחידת מקלט

• סימון אור: Indicates detected signal strength during cable tracing.
• יציאת RJ45: For connecting the remote end of the cable during tracing or continuity tests.
• מחווני LED: For displaying wire map results (e.g., open, short, cross).
• התאמת רגישות: Dial to adjust the sensitivity for cable tracing.

5. התקנה ותפעול בסיסי

5.1 הפעלה/כיבוי

• To power on the main unit, press and hold the כּוֹחַ לַחְצָן.
• כדי לכבות, לחץ והחזק את המקש כּוֹחַ לחצן שוב עד שהתצוגה תכבה.

5.2 ניווט

• השתמש ב- שְׁמֹאל ו יָמִינָה כפתורים כדי לנווט בין אפשרויות התפריט.
• הקש על לְהַכנִיס button to confirm a selection or start a test.
• הקש על ESC button to return to the previous menu or exit a function.

6. מצבי הפעלה ופונקציות

6.1 Network Cable Testing (RJ45, RJ11)

This function tests the continuity and wiring sequence of RJ45 (CAT5, CAT5E, CAT6, CAT6A) and RJ11 (CAT3) cables.

1. Connect one end of the cable to the RJ45 or RJ11 port on the main tester unit.
2. Connect the other end of the cable to the corresponding port on the receiver unit.
3. Select the "Continuity Test" or "Wire Map" function from the main menu.
4. לִלְחוֹץ לְהַכנִיס to start the test. The LCD will display the wiring status (e.g., straight-through, crossover, open, short).

6.2 מדידת אורך כבל

Accurately measures the length of network cables (2.5-200 meters) and identifies fault distances.

1. Ensure the cable is disconnected from all network devices.
2. Connect one end of the cable to the RJ45 port on the main tester unit. The other end should be open.
3. Select the "Length Measurement" function from the main menu.
4. לִלְחוֹץ לְהַכנִיס to start the measurement. The LCD will display the cable length and any detected fault distances (e.g., open circuit, short circuit).

6.3 בדיקת PoE

Detects Power over Ethernet (PoE) presence, voltage, and standard (802.3af/at).

1. Connect the network cable from the PoE source to the RJ45 port on the main tester unit.
2. Select the "PoE Test" function from the main menu.
3. לִלְחוֹץ לְהַכנִיס. The display will show PoE voltage, polarity, and the PoE standard (IEEE 802.3af/at or non-standard).

6.4 Cable Tracking (Toner Function)

Locates and identifies specific cables within a bundle or wall.

1. Connect the cable to be traced to the RJ45 or RJ11 port on the main tester unit.
2. Select the "Scan" or "Cable Tracking" function on the main unit. Choose between "Normal Mode", "Anti-interference Mode", or "PoE Mode" as needed.
3. Turn on the receiver unit and adjust its sensitivity.
4. Move the receiver unit along the suspected cable path. The signal light and audible tone on the receiver will indicate the presence of the traced cable.

6.5 Port Flash

Helps locate the corresponding network port on a switch or router by causing its indicator light to flash.

1. Connect the network cable from the main tester unit's RJ45 port to an active port on a switch or router.
2. Select the "Port Flash" function from the main menu.
3. The main unit will send a signal that causes the connected port's indicator light on the switch/router to flash, allowing for easy identification. This function supports 10M/100M/1000M hubs/switches.

7. תחזוקה

• ניקוי: השתמשו במטלית רכה ויבשה לניקוי המכשיר. אין להשתמש בחומרי ניקוי שוחקים או ממסים.
• אִחסוּן: Store the device in its carrying pouch in a cool, dry place away from direct sunlight and extreme temperatures.
• סוֹלְלָה: If the device uses replaceable batteries (not specified, assuming internal rechargeable or standard AA/AAA), ensure they are charged or replaced as needed. Remove batteries if storing for extended periods to prevent leakage.

8. פתרון תקלות

9. מפרטים

10. אחריות ותמיכה

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official NOYAFA webאתר. שמור את הוכחת הרכישה שלך לצורך תביעות אחריות.

For further assistance, you may contact NOYAFA customer service via their official channels. Please have your model number (NF-859GS) and purchase date ready.