Inkbird ITC-C216T Thermostat Instruction Manual

מָבוֹא

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

מידע בטיחות

• Ensure the thermostat is connected to a grounded power outlet.
• Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
• Keep the device away from water, except for the IP67 rated probe.
• אל תנסה לפרק או לתקן את היחידה בעצמך. צור קשר עם תמיכת הלקוחות אם מתעוררות בעיות.
• נתק תמיד את המכשיר לפני ניקוי או ביצוע תחזוקה.

המוצר נגמרview

רכיבים

תְמוּנָה: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

1. LCD with White Backlight: Displays current and set temperatures/times.
2. Operational Buttons: MODE, UP, SET, DOWN for navigation and setting adjustments.
3. תְפוּקָה: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
4. חיישן טמפרטורה: 2m/79in long, IP67 waterproof for accurate temperature detection.
5. קֶלֶט: 100~240Vac 50/60Hz max 10A.
6. סמל חימום: Indicates heating operation.
7. Cooling Icon: Indicates cooling operation.
8. Timing Icon: Indicates timing function is active.
9. סמל נעילת ילדים: מציין שנעילת ילדים מופעלת.
10. הַתחָלָה: Displays start temperature or time.
11. לְהַפְסִיק: Displays stop temperature or time.

תכונות מפתח

תְמוּנָה: The Inkbird ITC-C216T thermostat showcasinהמאפיינים העיקריים שלו.

• תצוגת LCD עם תאורה אחורית: Easy to read current and set values, even in low light.
• Three Control Modes: Temperature, Cycle Time, and Countdown.
• טווח טמפרטורות רחב: Controls temperatures from -40°C to 100°C.
• אזעקות טמפרטורה גבוהה/נמוכה: Customizable alarm values with an option to mute the buzzer.
• כיול טמפרטורה: Allows for fine-tuning temperature readings.
• Cooling Delay: Protects cooling equipment from short cycling.
• מנעול ילדים: מונע שינויים מקריים בהגדרות.
• פונקציית זיכרון: Retains all settings after a power interruption.
• גשש עמיד למים IP67: Suitable for use in soil or submerged in water.

הגדרה

1. לִפְרוֹק: Carefully remove the thermostat and its components from the packaging.
2. לִתְקוֹעַ תֶקַע: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
3. חבר מכשיר: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
4. גשש מיקום: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

מצבי הפעלה

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. מצב טמפרטורה

תְמוּנָה: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

• הקש על MODE button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
• לִלְחוֹץ מַעֲרֶכֶת to enter setting mode. The START temperature will flash. Use the UP ו לְמַטָה buttons to adjust the desired START temperature.
• לִלְחוֹץ מַעֲרֶכֶת again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP ו לְמַטָה.
• לִלְחוֹץ מַעֲרֶכֶת one more time to save the settings and exit.
• If START temperature is lower than STOP temperature, the thermostat operates in מצב חימום.
• If START temperature is higher than STOP temperature, the thermostat operates in מצב קירור.

2. Cycle Time Mode (P01)

תְמוּנָה: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

• לִלְחוֹץ MODE until P01 is displayed.
• לִלְחוֹץ מַעֲרֶכֶת. The ON time will flash. Adjust using UP/לְמַטָה.
• לִלְחוֹץ מַעֲרֶכֶת. The OFF time will flash. Adjust using UP/לְמַטָה.
• לִלְחוֹץ מַעֲרֶכֶת to save and exit. The device will now cycle ON and OFF according to your settings.

3. Countdown Mode (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

• P02: Countdown ON
  

  תְמוּנָה: Diagram explaining the Countdown ON Mode (P02).

  The device will turn ON after the set countdown period.
• P03: Countdown OFF
  

  תְמוּנָה: Diagram explaining the Countdown OFF Mode (P03).

  The device will turn OFF after the set countdown period.
• P04: Countdown ON & OFF
  

  תְמוּנָה: Diagram explaining the Countdown ON&OFF Mode (P04).

  The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

• לִלְחוֹץ MODE until P02, P03, or P04 is displayed.
• לִלְחוֹץ מַעֲרֶכֶת. The countdown time(s) will flash. Adjust using UP/לְמַטָה.
• לִלְחוֹץ מַעֲרֶכֶת לשמור ולצאת.

הגדרות מתקדמות

כיול טמפרטורה (CA)

תְמוּנָה: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

• With the device powered on, press and hold the מַעֲרֶכֶת button for approximately 3 seconds to enter the parameter settings.
• השתמש ב- UP/לְמַטָה buttons to navigate to the 'CA' (Calibration) setting.
• לִלְחוֹץ מַעֲרֶכֶת, ואז השתמש UP/לְמַטָה to adjust the calibration value (e.g., +0.5°C or -0.5°C).
• לִלְחוֹץ מַעֲרֶכֶת כדי לאשר ולצאת.

Cooling Delay (Pt)

תְמוּנָה: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

• Enter parameter settings (press and hold מַעֲרֶכֶת למשך 3 שניות).
• Navigate to 'Pt' (Cooling Delay).
• Adjust the delay time in minutes using UP/לְמַטָה.
• לִלְחוֹץ מַעֲרֶכֶת כדי לאשר ולצאת.

High/Low Temperature Alarms (AH/AL)

תְמוּנָה: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

• Enter parameter settings.
• Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
• Adjust the alarm temperature using UP/לְמַטָה.
• לִלְחוֹץ מַעֲרֶכֶת כדי לאשר.
• To mute the buzzer, press any button when the alarm sounds.

מנעול ילדים

תְמוּנָה: Thermostat displaying the child lock icon.

כדי למנוע שינויים מקריים בהגדרות, הפעל את נעילת הילדים:

• לחץ והחזק את UP ו לְמַטָה buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
• Repeat the action to unlock the device.

פונקציית זיכרון ואיפוס להגדרות היצרן

• פונקציית זיכרון: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
• איפוס למפעל: To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

יישומים

תְמוּנָה: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

• Reptile Terrariums and Aquariums
• Greenhouses and Plant Propagation
• Incubators for Eggs
• Home Brewing and Fermentation
• Controlling Freezers and Refrigerators
• Managing Heating Mats and other Home Appliances

מפרטים

פתרון בעיות

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

• תצוגה לא נדלקת: Ensure the thermostat is securely plugged into a live power outlet. Check the power supply.
• קריאת טמפרטורה לא מדויקת: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
• המכשיר לא נדלק/כבה: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
• אזעקה נשמעת ברציפות: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
• הגדרות לא נשמרות: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

תַחזוּקָה

• ניקוי: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
• טיפול בבדיקה: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
• אִחסוּן: If storing the device for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

אחריות ותמיכה

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird webאתר או צרו קשר ישירות עם שירות הלקוחות שלהם.

ניתן למצוא מידע נוסף ומשאבי תמיכה על ידי ביקור באתר חנות Inkbird באמזון.