מדריך למשתמש של ספק הכוח XPG Core Reactor II

1. הקדמה

The XPG Core Reactor II Power Supply is a high-performance component designed to provide stable and efficient power to your computer system. With 750W of power and 80 Plus Gold certification, it ensures high energy efficiency. Its Full Modular design simplifies installation and cable management. The Active PFC (Power Factor Correction) feature further enhances overall system performance by delivering consistent and reliable power, crucial for demanding PC operations.

2. מידע בטיחות

Please read and understand all safety instructions before installing or operating the power supply. Failure to do so may result in personal injury or damage to the product or other components.

• בטיחות חשמל: Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply. Ensure your hands are dry when handling electrical components.
• הארקה נכונה: Ensure your computer system and the power outlet are properly grounded to prevent electrical shock.
• אוורור: Do not block the ventilation openings of the power supply. Ensure adequate airflow around the unit to prevent overheating.
• סְבִיבָה: Operate the power supply in a dry, well-ventilated environment. Avoid exposure to moisture, dust, and extreme temperatures.
• טיפול: Handle the power supply with care. Avoid dropping or subjecting it to strong impacts.
• שירות מורשה: Do not attempt to open or repair the power supply yourself. Refer all servicing to qualified service personnel. Opening the unit will void the warranty.

3. תכולת החבילה

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or XPG support.

• XPG Core Reactor II Power Supply Unit
• סט כבלים מודולרי (כולל כבלים ATX 24 פינים, EPS/CPU 4+4 פינים, PCIe 6+2 פינים, SATA וכבלים להרכבה היקפית)
• כבל מתח AC
• ברגי הרכבה
• מדריך למשתמש (מסמך זה)

Image: The XPG Core Reactor II Power Supply unit, showcasing its black finish, fan grille, and modular cable ports. The image also implies the presence of various modular cables for system connection.

4. התקנה והתקנה

Follow these steps to properly install your XPG Core Reactor II Power Supply into your computer system.

1. הכן את המערכת שלך: ודא שהמחשב כבוי לחלוטין ומנותק משקע החשמל בקיר. פתח את מארז המחשב.
2. הסר את ספק הכוח הישן (אם רלוונטי): Disconnect all cables from your old power supply and remove its mounting screws. Carefully slide it out of the case.
3. Mount the New Power Supply: Position the XPG Core Reactor II Power Supply in the designated PSU bay of your computer case. Ensure the fan is oriented correctly (typically facing downwards or upwards depending on case design and ventilation). Secure it with the provided mounting screws.
4. חיבור כבלים מודולריים: Due to its full modular design, you only need to connect the cables required for your components.
   • כוח לוח האם: Connect the 24-pin ATX cable to the corresponding port on the power supply and the motherboard.
   • כוח מעבד: Connect the 4+4-pin EPS/CPU cable to the power supply and the CPU power connector(s) on your motherboard.
   • עוצמת כרטיס המסך: Connect the 6+2-pin PCIe cables to the power supply and your graphics card(s). Use separate cables for each connector on high-power GPUs if possible.
   • התקני SATA: חבר כבלי חשמל SATA לכונני SSD, כונני HDD וכוננים אופטיים שלך.
   • התקנים היקפיים: Connect peripheral (Molex) cables for case fans or other accessories as needed.
5. ניהול כבלים: Route cables neatly to improve airflow and aesthetics within your case.
6. סגור את המארז וחבר לחשמל: Once all connections are secure, close your computer case. Connect the AC power cord to the power supply and then to a wall outlet.

5. הוראות הפעלה

Operating the XPG Core Reactor II Power Supply is straightforward once installed.

• הפעלה: Ensure the power switch on the back of the power supply (next to the AC inlet) is in the 'I' (On) position. Then, power on your computer using the case's power button.
• יְעִילוּת: The 80 Plus Gold certification indicates high energy efficiency, meaning less wasted heat and lower electricity consumption compared to less efficient power supplies.
• Active PFC: The Active Power Factor Correction feature automatically adjusts the input current waveform to improve the power factor, leading to more stable and cleaner power delivery to your components.
• כיבוי: To shut down your system, use the operating system's shutdown function. For complete power disconnection, switch the power supply's switch to the 'O' (Off) position and unplug the AC power cord.

6. תחזוקה

תחזוקה שוטפת מסייעת להבטיח את אורך החיים והביצועים האופטימליים של ספק הכוח שלך.

• הסרת אבק: Periodically (e.g., every 3-6 months), power off and unplug your computer. Use compressed air to gently blow dust out of the power supply's fan grille and ventilation openings. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
• בדיקת כבלים: Occasionally check all connected modular cables to ensure they are securely seated and free from damage.
• בדיקה סביבתית: Ensure the operating environment remains clean, dry, and within recommended temperature ranges.

7. פתרון תקלות

If you encounter issues with your XPG Core Reactor II Power Supply, refer to the following common troubleshooting steps:

If the problem persists after trying these steps, please contact XPG customer support for further assistance.

8. מפרטים

9. אחריות ותמיכה

For warranty information, technical support, or service inquiries regarding your XPG Core Reactor II Power Supply, please visit the official XPG webאתר או צור קשר ישירות עם תמיכת הלקוחות שלהם.

You can also visit the official XPG Store on Amazon for product information and support resources:

Visit the XPG Store on Amazon