1. הקדמה
The XPG Core Reactor II 850W Modular Power Supply is engineered to deliver stable and efficient power to your computing system. Compliant with the Intel ATX 3.0 design guide and featuring an 80 PLUS Gold certification, this power supply ensures reliable performance for a wide range of PC builds. Its fully modular design simplifies cable management, contributing to a cleaner and more organized internal setup.
Figure 1: XPG Core Reactor II 850W Power Supply
2. תכולת החבילה
ודא שכל הפריטים המפורטים להלן כלולים בחבילת המוצר שלך:
- XPG Core Reactor II 850W Modular Power Supply Unit
- סט כבלים מודולרי (כולל כבל 12VHPWR)
- כבל מתח AC
- ברגי הרכבה
- מדריך למשתמש (מסמך זה)
סרטון 1: נגמרview of the XPG Core Reactor II Power Supply and its included components.
3. תכונות
- Intel ATX 3.0 Design Guide Compliant: Equipped with a 12VHPWR (12+4) Connector for next-generation GPUs.
- Certified GOLD Efficiency: Achieves high efficiency ratings by both 80 PLUS and Cybenetics, reducing energy waste and heat generation.
- Premium Japanese Capacitors: Utilizes 100% Japanese 105℃ Capacitors for enhanced stability and long-term reliability.
- מאוורר מיסב דינמי נוזלים (FDB): Features an FDB fan with intelligent fan control for quiet operation and efficient cooling.
- Available in Multiple Wattages: Models available in 1200W, 1000W, 850W, 750W, and 650W to suit various system requirements.
Figure 2: ATX 3.0 and 12VHPWR Connector Details
Figure 3: Japanese 105°C Capacitors
4. מפרטים
| תְכוּנָה | עֵרֶך |
|---|---|
| שם הדגם | COREREACTORII850G-BKCUS |
| פלט וואטtage | 850 וואט |
| גורם צורה | ATX |
| הסמכת יעילות | 80 PLUS Gold, Cybenetics Gold |
| שיטת קירור | Air (FDB Fan) |
| מידות המוצר (L x W x H) | 5.51 x 5.91 x 3.35 אינץ' (140 x 150 x 86 מ"מ) |
| משקל פריט | 3.5 פאונד (1.59 קילוגרם) |
| מכשירים תואמים | PC Components (Motherboard, CPU, GPU, Storage) |
Figure 4: Cable Configuration for Core Reactor II Series
5. התקנה
Follow these steps to properly install your XPG Core Reactor II 850W Power Supply:
- הכן את המערכת שלך: Ensure your computer is powered off and unplugged from the wall. Open your PC case to access the power supply mounting area.
- התקן את ספק הכוח: Secure the XPG Core Reactor II PSU into the designated power supply bay in your PC case using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards or towards an intake vent).
- חיבור כבלים חיוניים:
- כבל לוח אם ATX 24 פינים: Connect the large 24-pin cable from the PSU to the corresponding port on your motherboard.
- CPU Power Cables: Connect the 4+4-pin or 8-pin CPU power cables to the CPU power headers on your motherboard. Modern motherboards may require two such connections.
- GPU Power Cables: For graphics cards requiring a 12VHPWR connector, use the dedicated 12VHPWR (12+4) cable. For other GPUs, use the appropriate 6+2-pin PCI-E cables. Ensure all connections are fully seated.
- SATA/Molex Cables: Connect SATA power cables to your storage drives (SSDs, HDDs) and Molex cables to any other peripherals requiring them.
- ניהול כבלים: Utilize the fully modular design to connect only the necessary cables, improving airflow and aesthetics within your case. Route cables neatly to prevent obstruction.
- בדיקה סופית: Double-check all connections to ensure they are secure. Close your PC case.
Figure 5: Modular Cable Ports
איור 6: צד View of Modular Connections
6. הוראות הפעלה
After successful installation, connect the AC power cord to the PSU and then to a wall outlet. Flip the main power switch on the back of the PSU to the 'ON' position. You can then power on your computer as usual.
The XPG Core Reactor II features an intelligent FDB fan control. The fan operates silently at low loads and adjusts its speed dynamically to maintain optimal temperatures under heavier loads. This ensures efficient cooling without unnecessary noise.
Figure 7: Main Power Switch and AC Inlet
7. תחזוקה
כדי להבטיח את אורך החיים והביצועים האופטימליים של ספק הכוח שלך, יש לשקול את טיפי התחזוקה הבאים:
- שמור על זה נקי: Periodically clean the exterior of the power supply and its fan grill to prevent dust buildup, which can impede airflow and cooling efficiency. Use compressed air for hard-to-reach areas.
- הקפידו על אוורור תקין: Make sure your PC case has adequate airflow and that the power supply's intake and exhaust vents are not obstructed.
- הימנע מעומס יתר: Ensure your system's power consumption does not consistently exceed the PSU's rated wattage.
8. פתרון תקלות
If you encounter issues with your XPG Core Reactor II 850W Power Supply, try the following steps:
- אין כוח:
- Check if the AC power cord is securely connected to both the PSU and the wall outlet.
- Ensure the main power switch on the PSU is in the 'ON' position.
- Verify that the 24-pin ATX and CPU power cables are correctly and firmly connected to the motherboard.
- חוסר יציבות מערכת/כיבויים אקראיים:
- Ensure all component power cables (GPU, CPU, etc.) are securely connected.
- Confirm that your system's total power draw does not exceed the 850W capacity of the PSU. High-end components, especially GPUs, can have significant power spikes.
- בדוק אוורור תקין בתוך מארז המחשב שלך כדי למנוע התחממות יתר.
- רעש יוצא דופן:
- If the fan is unusually loud, ensure it is not obstructed by cables or dust.
- A slight buzzing noise under heavy load can sometimes occur with certain components; however, persistent loud or grinding noises may indicate a fan issue.
If issues persist after following these steps, please contact XPG customer support.
9. אחריות ותמיכה
The XPG Core Reactor II 850W Modular Power Supply comes with a אחריות לשנה, מה שמבטיח אמינות ארוכת טווח ושקט נפשי. אחריות זו מכסה פגמים בחומרים ובביצוע תחת שימוש רגיל.
For technical support, warranty claims, or further assistance, please visit the official XPG webאתר או צרו קשר עם מחלקת שירות הלקוחות שלהם. שמרו את הוכחת הרכישה שלכם לצורך אימות האחריות.
יַצרָן: ADATA
מספר דגם: COREREACTORII850G-BKCUS
