מָבוֹא
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Thermalright Assassin X 120R SE PLUS CPU Cooler. This high-performance air cooler is designed to efficiently dissipate heat from your CPU, ensuring stable operation under various workloads. It features a single tower design, four pure copper heat pipes, and dual 120mm PWM fans for optimal cooling and quiet performance. Please read this manual thoroughly before installation and use.
מידע בטיחות
- תמיד נתק את החשמל מהמחשב שלך לפני התקנה או ביצוע תחזוקה על מקרר המעבד.
- Handle components with care to avoid damage to the CPU, motherboard, or cooler.
- Keep thermal paste away from skin and eyes. In case of contact, rinse thoroughly with water.
- Ensure proper ventilation in your computer case to maximize cooling efficiency.
- Do not attempt to modify the cooler or its components, as this may void the warranty and pose a safety risk.
תוכן החבילה
ודא שכל הפריטים נמצאים בחבילה שלך:
- Thermalright Assassin X 120R SE PLUS CPU Cooler (Heatsink with pre-installed mounting hardware)
- TL-C12C 120mm PWM Fan
- TL-C12RB V2 120mm Reverse Airflow PWM Fan
- Fan Clips (for two fans)
- מתחם תרמי
- Intel Mounting Kit (LGA1700/115X/1200/1851)
- AMD Mounting Kit (AM4/AM5)
מפרטים
| תכונה | מִפרָט |
|---|---|
| CPU Cooler Dimensions | 125(L)x96(W)x148(H)mm (4.92x3.78x5.83 inch) |
| חומר גוף קירור | אֲלוּמִינְיוּם |
| צינורות חום | 4x6mm Copper Heat Pipes (AGHP Technology) |
| מימדים של מאוורר | 120x120x25mm (4.72x4.72x0.98 inches) |
| מהירות מאוורר (RPM) | 1550rpm±10% / 1500rpm±10% |
| סוג מחבר חשמל | 4-Pin PWM |
| כרך ידtage | 12V |
| זרימת אוויר | 66.17/58 CFM (MAX) |
| רמת רעש | ≤25.6 dB(A) |
| שקעים תואמים | Intel: LGA1150/1151/1155/1156/1200/1700/17XX/1851, AMD: AM4/AM5 |
| מִשׁקָל | 2.07 פאונד |
The cooler features AGHP (Anti-Gravity Heat Pipe) Technology, ensuring consistent performance regardless of mounting orientation. The frosted black top cover provides a sleek aesthetic.
Image: Close-up of the cooler's heat pipes, illustrating the AGHP Technology for consistent performance in various orientations.
Image: Dimensional diagram of the Assassin X 120R SE PLUS CPU Cooler and its TL-C12C fan, showing length, width, and height measurements.
מדריך התקנה
Follow these steps carefully to install your Thermalright Assassin X 120R SE PLUS CPU Cooler. The installation process varies slightly depending on your CPU socket type (AMD or Intel).
1. התקנת AMD AM4/AM5
- הכן לוח אם: For AMD AM4/AM5, remove the existing plastic brackets around the CPU socket. Keep the motherboard backplate in place.
- התקן יציאות: Place the four red plastic standoffs onto the motherboard's CPU cooler mounting holes.
- התקנת סוגריים מתכתיים: Position the two metal brackets over the plastic standoffs and secure them with the provided AM4 screws. Tighten them evenly.
Video: AMD AM4/AM5 Motherboard Preparation and Bracket Installation (0:06 - 1:25).
2. Intel LGA1700/115X/1200/1851 Installation
- Prepare Backplate: Adjust the mounting hole position on the universal backplate to match your Intel socket (e.g., 115X or 1700).
- התקנת לוחית אחורית: Place the adjusted backplate on the backside of your motherboard, aligning the holes with the CPU socket.
- התקן יציאות: From the front side of the motherboard, install the four blue Intel plastic standoffs into the backplate.
- התקנת סוגריים מתכתיים: Position the two metal brackets over the plastic standoffs and secure them with the provided Intel screws. Tighten them evenly.
Video: Intel LGA1700/115X Backplate and Bracket Installation (1:26 - 2:40).
3. נהלים נפוצים (כל השקעים)
- יש למרוח תרכובת תרמית: Apply a small amount of thermal compound (pea-sized dot or line method) to the center of your CPU's IHS (Integrated Heat Spreader).
- Remove Heatsink Sticker: Ensure you remove the protective sticker from the heatsink's base before mounting.
- גוף קירור להרכבה: Carefully place the heatsink onto the CPU, aligning the mounting nuts with the screws on the installed brackets. Tighten both nuts evenly with a screwdriver until snug. Do not overtighten.
- התקנת מאווררים: Attach the fan clips to the 120mm PWM fans. Then, clip the fans onto the heatsink, ensuring proper airflow direction (typically pushing air through the heatsink towards the rear of the case).
- חיבור כבלי מאוורר: Connect the 4-pin PWM power cables from the fans to the CPU_FAN header(s) on your motherboard.
Video: Applying Thermal Compound, Mounting Heatsink, and Fan Installation (2:41 - 3:50).
Image: Quality installation kits for both AMD and Intel platforms, showcasing the universal mounting system and heatsink design.
Image: Optimized installation experience, highlighting the large heatsink surface area, high airflow fan, and intelligent PWM fan speed control.
Image: The Assassin X 120R SE PLUS CPU cooler, featuring its single tower design, dark top plate, and four pure copper heat pipes.
הוראות הפעלה
Once installed, the Thermalright Assassin X 120R SE PLUS CPU Cooler operates automatically. The PWM (Pulse Width Modulation) fans adjust their speed based on CPU temperature, providing efficient cooling while minimizing noise. Ensure your motherboard's BIOS/UEFI settings are configured to allow PWM control for the CPU fan header.
- אתחול ראשוני: After installation, power on your computer. Monitor CPU temperatures using system monitoring software to confirm proper cooler function.
- הגדרות BIOS/UEFI: Access your motherboard's BIOS/UEFI to verify that the CPU fan is detected and operating in PWM mode. You can often customize fan curves here to suit your preference for noise and cooling performance.
- זרימת אוויר: Ensure that the fans are oriented correctly to draw cool air through the heatsink and exhaust warm air out of the case. The dual fan configuration (one intake, one exhaust reverse airflow fan) creates strong airflow.
תַחזוּקָה
תחזוקה שוטפת מסייעת להבטיח ביצועים אופטימליים ואורך חיים של מקרר המעבד שלכם.
- הסרת אבק: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Accumulation of dust can reduce cooling efficiency.
- בדיקת מאוורר: Check the fans for any signs of wear, damage, or unusual noise. Ensure fan clips are securely attached.
- משחה תרמית: While not frequently required, if you remove the heatsink for any reason, it is recommended to clean off the old thermal paste from both the CPU and heatsink base and apply a fresh layer before reinstallation.
פתרון בעיות
If you encounter issues with your CPU cooler, refer to the following common troubleshooting steps:
- טמפרטורות מעבד גבוהות:
- Verify that the heatsink is securely mounted and making good contact with the CPU.
- בדוק אם משחה תרמית נמרחה בצורה נכונה ואחידה.
- Ensure fans are spinning and oriented for proper airflow.
- נקו כל הצטברות אבק מגוף הקירור וממאווררים.
- Check case airflow and fan configuration.
- מאווררים שלא מסתובבים:
- Ensure fan cables are securely connected to the CPU_FAN header(s) on the motherboard.
- Check BIOS/UEFI settings to ensure fan control is enabled and not set to a very low RPM.
- Test fans by connecting them to a different fan header if available.
- רעש מאוורר חריג:
- Inspect fan blades for any obstructions or damage.
- Ensure fan clips are properly seated and not vibrating against the heatsink.
- Check fan bearings for wear; consider replacing the fan if noise persists.
אחריות ותמיכה
Thermalright products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official Thermalright webאתר או צור קשר עם הספק המקומי שלך. שמור את הוכחת הרכישה שלך לצורך תביעות אחריות.
