FSP SDA2-850-G5

FSP Dagger Pro 850W SFX Power Supply User Manual (SDA2-850-Gen5)

Model: SDA2-850-G5

1. הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your FSP Dagger Pro 850W SFX Power Supply. The FSP Dagger Pro series is designed for small form factor (SFX) systems, offering high efficiency and reliable power delivery for demanding components.

Key features of the FSP Dagger Pro 850W SFX Power Supply include:

FSP Dagger Pro 850W SFX Power Supply, top-down view מציג את גריל המאוורר ופתחי הכבלים המודולריים.

Image 1.1: FSP Dagger Pro 850W SFX Power Supply, showcasing its compact design and modular cable interface.

2. מידע בטיחות

WARNING: Improper installation or use can result in serious injury or damage to equipment. Please read and follow all instructions carefully.

3. תכולת החבילה

ודא שהחבילה שלך מכילה את הפריטים הבאים:

Diagram showing the FSP Dagger Pro SFX Power Supply dimensions and a bundle of modular cables.

Image 3.1: Illustration of the compact dimensions of the Dagger Pro PSU and the included modular cable set.

4. התקנה והתקנה

Follow these steps to install your FSP Dagger Pro 850W SFX Power Supply into your computer system.

4.1. התקנה פיזית

  1. הכינו את המערכת שלכם: Ensure your computer is powered off and the power cord is disconnected from the wall outlet. Open your computer case to access the power supply mounting area.
  2. Remove old PSU (if applicable): If replacing an existing power supply, disconnect all cables from components and remove the old PSU from the case.
  3. Mount the new PSU: Carefully place the FSP Dagger Pro 850W into the SFX power supply bay of your case. Secure it using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow, typically facing inwards or downwards depending on case design.
FSP Dagger Pro 850W SFX Power Supply installed in a computer case, showing the power switch and AC inlet.

Image 4.1: The FSP Dagger Pro PSU mounted in a system, highlighting the rear power switch and AC input.

4.2. חיבורי כבלים

The Dagger Pro 850W is a fully modular power supply. Connect only the cables required for your system components.

תקריב view of the modular cable ports on the FSP Dagger Pro 850W SFX Power Supply, labeled for CPU, PCIe, 12V-2x6, Peripheral, and Motherboard.

תמונה 4.2: מפורט view of the modular cable connection panel on the PSU.

  1. Motherboard Power (24-pin): Connect the 24-pin ATX cable from the PSU to the corresponding port on your motherboard. Ensure it clicks into place.
  2. CPU Power (4+4-pin or 8-pin): Connect the CPU power cable(s) from the PSU to the CPU power connector(s) on your motherboard. High-end motherboards may require two 8-pin connectors.
  3. PCIe Power (6+2-pin or 12VHPWR):
    • For graphics cards requiring 6-pin or 8-pin PCIe connectors, use the provided 6+2-pin cables.
    • For NVIDIA RTX 40 series graphics cards or other GPUs requiring the new 12VHPWR connector, use the dedicated 12VHPWR cable. Ensure it is fully seated into both the PSU and the graphics card.
    Diagram highlighting the 12VHPWR connector on the FSP Dagger Pro PSU for high-power graphics cards.

    Image 4.3: The 12VHPWR connector on the Dagger Pro PSU, designed for modern high-power graphics cards.

  4. כוח SATA: חבר כבלי חשמל SATA לכונני SSD, כונני HDD וכוננים אופטיים שלך.
  5. כוח היקפי (Molex): Connect peripheral power cables for case fans, fan controllers, or other accessories that use Molex connectors.
  6. ניהול כבלים: Route cables neatly to improve airflow and aesthetics within your case.

5. הוראות הפעלה

Once all components are connected and secured, you can power on your system.

  1. חבר מתח AC: Plug the AC power cord into the power supply's inlet and then into a wall outlet or surge protector.
  2. Power On PSU: Flip the power switch on the back of the power supply to the "ON" (I) position.
  3. מערכת ההפעלה: לחץ על כפתור ההפעלה במארז המחשב שלך.

5.1. Fan Operation (Semi-Fanless Mode)

The FSP Dagger Pro 850W features a semi-fanless design for optimized low-noise operation. The fan will remain off (0dBA) under low load conditions (typically below 20% load or <25°C internal temperature). As the load increases, the fan will gradually spin up to maintain optimal temperatures, ensuring quiet operation when not under heavy demand.

Fan curve diagram showing fanless, quiet, and cooling modes based on PSU load and temperature.

Image 5.1: Fan operation curve illustrating the semi-fanless mode for reduced noise at low loads.

6. תחזוקה

תחזוקה נאותה מבטיחה את אורך החיים והביצועים האופטימליים של ספק הכוח שלך.

7. פתרון תקלות

If you encounter issues with your FSP Dagger Pro 850W power supply, refer to the following common problems and solutions:

בְּעָיָהסיבה אפשריתפִּתָרוֹן
המערכת לא נדלקת.
  • כבל החשמל לא מחובר.
  • מתג ספק הכוח כבוי.
  • חיבורי כבלים רופפים.
  • רכיב פגום (לוח אם, מעבד וכו').
  • הגנת ספק הכוח הופעלה.
  • Ensure AC power cord is securely plugged into PSU and wall outlet.
  • Flip the PSU switch to the "ON" (I) position.
  • Check all modular cable connections (24-pin, CPU, PCIe) at both the PSU and component ends.
  • בדקו רכיבים בנפרד במידת האפשר.
  • Disconnect all power, wait 5 minutes, then reconnect and try again.
המערכת נדלקת אך נכבית מיד.
  • עומס יתר או קצר חשמלי.
  • התחממות יתר.
  • רכיב פגום.
  • Ensure total system power draw does not exceed 850W.
  • Check for proper component installation and ensure no metal parts are touching the motherboard.
  • Verify adequate case airflow and clean PSU fan/vents.
המאוורר לא מסתובב.
  • Semi-fanless mode is active.
  • חסימת מאוורר.
  • This is normal under low loads. The fan will activate when the load increases.
  • Check for any cables or debris blocking the fan.

If the problem persists after trying these solutions, please contact FSP customer support.

8. מפרטים

Detailed specifications for the FSP Dagger Pro 850W SFX Power Supply (SDA2-850-G5):

תכונהפְּרָט
שם הדגםSFX PSU
מספר דגם של פריטSDA2-850-G5
גורם צורהSFX
פלט וואטtage850 וואט
הסמכה 80 פלוסזָהָב
תקן ATXATX 3.1
תקן PCIePCIe 5.1 (with native 12VHPWR)
מודולריותמודולרי מלא
שיטת קירורAir (92mm fan, semi-fanless)
מידות המוצר (L x W x H)5 x 4 x 2.5 אינץ' (125 x 100 x 63.5 מ"מ)
משקל פריט4.51 פאונד (2.05 קילוגרם)
מכשירים תואמיםComputer, PC
יַצרָןFSP Group U.S.A
Diagram illustrating the single +12V rail design for efficient power delivery to graphics cards.

Image 8.1: Explanation of the single +12V rail design for stable power to VGA cards.

9. אחריות ותמיכה

The FSP Dagger Pro 850W SFX Power Supply comes with a אחריות יצרן לשנה, מה שמבטיח אמינות ארוכת טווח ושקט נפשי. אחריות זו מכסה פגמים בחומרים ובביצוע תחת שימוש רגיל.

For technical support, warranty claims, or further assistance, please visit the official FSP webאתר או צרו קשר עם מחלקת שירות הלקוחות שלהם. שמרו את הוכחת הרכישה שלכם לצורך אימות האחריות.

FSP Official Webאֲתַר: https://www.fsplifestyle.com/

מסמכים קשורים - SDA2-850-G5

מִרֹאשׁview FSP Power Supply Manual: Installation, Connectors, Warranty, and Troubleshooting
This comprehensive manual from FSP provides detailed instructions for installing and connecting your power supply unit (PSU), explains connector pinouts, outlines the warranty policy, offers troubleshooting guidance, and covers WEEE and RoHS compliance information.
מִרֹאשׁview FSP FlexGURU Series Power Supply Units: FSP250-50FGBBI(M) & FSP300-57FCB - User Manual & Specifications
Comprehensive user manual and technical specifications for FSP FlexGURU series power supply units, including models FSP250-50FGBBI(M) and FSP300-57FCB. Features installation guide, connector pinouts, troubleshooting, and RoHS compliance.
מִרֹאשׁview שרטוט מכני ומפרטי פינים של FSP 9PA250DC00
שרטוט מכני מפורט ומפרטי פינים עבור יחידת ספק הכוח FSP 9PA250DC00, כולל קצאות חוטים, מידות ומידע על הדגם מקבוצת FSP.
מִרֹאשׁview FSP 9PA400CB01 Power Supply Assembly Diagram and Pinout
Detailed assembly diagram and pinout information for the FSP 9PA400CB01 power supply unit, including connector specifications, wire details, and dimensions. Model FSP400-70PFL (SK).
מִרֹאשׁview FSP100-50FAB Power Supply Appearance and Wiring Diagram
Technical specifications and assembly details for the FSP100-50FAB power supply unit by FSP Technology Inc. Includes detailed wiring information, connector pinouts, wire colors, gauge, lengths, and dimensional data.
מִרֹאשׁview FSP150-ABBN3 Power Supply Mechanical Dimensions and Specifications
Detailed mechanical dimensions, physical specifications, and revision history for the FSP150-ABBN3 power supply unit by FSP Technology Inc. Includes part number 9NB1500700 and dimensional tolerances.