LOKITHOR J3250 PRO

מדריך למשתמש של מתנע קפיצות LOKITHOR J3250 PRO

דגם: J3250 PRO

1. הקדמה

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. מידע בטיחות

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

LOKITHOR J3250 PRO with safety icons including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temp, high-temp, over-voltage, over-load, over-charge, and over-current protection.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. המוצר נגמרview

3.1 מה בקופסה

Contents of the LOKITHOR J3250 PRO box, including the jump starter unit, jumper cables, USB-A to USB-C cable, USB-C to USB-C cable, 12V adapter, storage bag, and manual.

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 תכונות עיקריות

LOKITHOR J3250 PRO jump starter connected to a car battery, displaying 12 Volts, 3250A Peak, 50 Starts, 9.5L Gas, and 7.5L Diesel capabilities.

The J3250 PRO provides 3250A peak current, suitable for large engines.

LOKITHOR J3250 PRO jump starter being splashed with water and covered in dust, illustrating its IP65 waterproof and dustproof design.

The device features an IP65 rating for water and dust resistance.

4. הגדרה וטעינה

4.1 טעינה ראשונית

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

  1. חבר את כבל ה-USB-C ל-USB-C המצורף ליציאת הקלט USB-C של מתנע המכשיר.
  2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
  3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. הוראות הפעלה

5.1 התנעת רכב באמצעות חיבור חשמל (מצב רגיל)

Use Normal Mode for vehicles with a partially discharged battery.

  1. צרף Clamps: חבר את האדום (+) clamp to the positive terminal of the vehicle battery. Connect the black (-) clamp למסוף השלילי של מצבר הרכב.
  2. הפעלה: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
  3. התנעת רכב: הפעל את הרכב שלך.
  4. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps מצבר הרכב.
Four-step diagram showing how to jump start a car in normal mode: attach clamps, power on, start vehicle, power off and detach.

Steps for jump starting a vehicle using Normal Mode.

5.2 התנעת רכב באמצעות חיבור חשמל (מצב Boost)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

  1. צרף כלור אדוםamp: חבר את האדום (+) clamp למסוף החיובי של מצבר הרכב.
  2. Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
  3. צרף כלור שחורamp: חבר את השחור (-) clamp למסוף השלילי של מצבר הרכב.
  4. התנעת רכב: Start your vehicle within 30 seconds of activating Boost Mode.
  5. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps מצבר הרכב.
Five-step diagram showing how to jump start a car in boost mode: attach red clamp, long press boost button, attach black clamp, start vehicle, power off and detach.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 שימוש כסוללת גיבוי ניידת

ה-J3250 PRO יכול לטעון מגוון מכשירים אלקטרוניים.

LOKITHOR J3250 PRO acting as a power bank, charging a smartphone, smartwatch, and tablet via its USB-A and USB-C ports.

The J3250 PRO can charge multiple electronic devices.

5.4 שימוש בפנס ה-LED

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

The LOKITHOR J3250 PRO's 400-lumen LED flashlight illuminating the words SOS, Strobe, and Flashlight.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. תחזוקה

LOKITHOR J3250 PRO jump starter stored in a car trunk, with an icon indicating '42 Months Ultra-Long Standby Time'.

The J3250 PRO maintains charge for up to 42 months in standby.

7. פתרון תקלות

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

If problems persist, please contact LOKITHOR customer support.

8. מפרטים

תכונהמִפרָט
דֶגֶםJ3250 PRO
שִׂיא Ampלמחוק3250 Amps
תאימות מנוע (בנזין)עד 9.5 ליטר
תאימות מנוע (דיזל)עד 7.5 ליטר
סוג סוללהLiFePO4 (ליתיום ברזל פוספט)
חיי מחזור סוללה2000+ Cycles (at 100% DoD)
כניסת טעינהUSB-C PD 100W (5-20V/5A)
יציאת USB-C100W (20V/5A)
יציאת USB-A18W QC (12V/1.5A)
פלט DC12V/10A
בהירות הפנס400 לומן
מידות10.67 x 3.78 x 8.34 אינץ'
מִשׁקָל6.39 פאונד
טמפרטורת הפעלה-4°F עד 140°F (-20°C עד 60°C)
דירוג IPIP65 (עמיד למים ולאבק)
זמן המתנהעד 42 חודשים
LOKITHOR J3250 PRO jump starter shown in a desert environment at 140°F and a snowy environment at -4°F, demonstrating its wide operating temperature range.

The J3250 PRO is designed to operate in a wide range of temperatures.

9. אחריות ותמיכה

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webאתר או צרו קשר ישירות עם מחלקת שירות הלקוחות שלהם. שמרו את קבלת הרכישה כהוכחת קנייה לתביעות אחריות.

If you have any after-sales questions, please feel free to contact us.

מסמכים קשורים - J3250 PRO

מִרֹאשׁview מדריך למשתמש למתנע קפיצות Lokithor J3250 PRO 12V
מדריך מקיף למתנע קפיצות Lokithor J3250 PRO 12V, הכולל הוראות בטיחות, תכונות, מפרטים, הפעלה, קודי שגיאה, אזהרות, מיחזור ומידע על אחריות.
מִרֹאשׁview מתנע קפיצות LOKITHOR J3250: מידע על בטיחות, אמצעי זהירות ואחריות
הוראות בטיחות מפורטות, אמצעי זהירות להפעלה, הנחיות טיפול ומיחזור ותנאי אחריות עבור ספק הכוח הרב-תכליתי להפעלה LOKITHOR J3250. למד כיצד להשתמש ולתחזק בבטחה את LOKITHOR J3250 שלך.
מִרֹאשׁview מידע בטיחות, אמצעי זהירות ואחריות עבור LOKITHOR J2250
הוראות בטיחות מקיפות, אמצעי זהירות, הנחיות טיפול ומיחזור ופרטי אחריות עבור ספק הכוח הרב-תכליתי להפעלה מדגם LOKITHOR J2250.
מִרֹאשׁview מידע בטיחות והנחיות למשתמש של LOKITHOR JA400
מידע מקיף על בטיחות והנחיות למשתמש עבור מתנע החירום הרב-תכליתי לרכב LOKITHOR JA400, כולל הוראות הפעלה, אזהרות ומדיניות אחריות.
מִרֹאשׁview מתנע קפיצות LOKITHOR J401: בטיחות, אמצעי זהירות ואחריות
מסמך זה מספק הוראות בטיחות חיוניות, אמצעי זהירות, הנחיות טיפול ומיחזור ומידע על אחריות עבור ספק הכוח הרב-תכליתי להתנעה ומתנע קפיצות לרכב מדגם LOKITHOR J401.
מִרֹאשׁview מדריך למשתמש למתנע קפיצות לרכב LOKITHOR J401X: הפעלה, התנעה, מד מתח, טעינה ומדריך LED
מדריך למשתמש רשמי עבור מתנע קפיצות לרכב LOKITHOR J401X. מספק הוראות מפורטות על תהליך הפעלתו, כולל התנעת רכב (שיטות רגילות והתנעה בכוח), שימוש בפונקציית מד המתח, טעינת המכשיר באמצעות USB-C או מצית סיגריות, טעינת טלפונים ניידים והפעלת נורת ה-LED. כולל תיאורי ממשק והנחיות בטיחות.