SILCA Sicuro Titanium Water Bottle Cage (V2, SI/160877)

SILCA Sicuro Titanium Water Bottle Cage Instruction Manual

מותג: SILCA | דֶגֶם: Sicuro Titanium Water Bottle Cage (V2, SI/160877)

מָבוֹא

This manual provides essential information for the proper installation, operation, and maintenance of your SILCA Sicuro Titanium Water Bottle Cage. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

המוצר נגמרview

The SILCA Sicuro Titanium Water Bottle Cage is a lightweight and durable accessory designed for secure bottle retention on bicycles. Crafted from titanium, it offers a balance of strength and minimal weight, featuring a 21mm fore/aft adjustment for precise positioning.

SILCA Sicuro Titanium Water Bottle Cage, front view

תמונה 1: חֲזִית view of the SILCA Sicuro Titanium Water Bottle Cage, showcasing its design and rainbow finish.

SILCA Sicuro Titanium Water Bottle Cage, side view

תמונה 2: צַד view of the SILCA Sicuro Titanium Water Bottle Cage, highlighting its profile and construction.

התקנה והתקנה

  1. הכנת נקודות הרכבה: Locate the two threaded inserts on your bicycle frame, typically on the down tube or seat tube. Ensure these are clean and free of debris.
  2. Position the Cage: Align the mounting slots on the SILCA Sicuro cage with the threaded inserts on your frame. The cage features 21mm of fore/aft adjustment, allowing you to slide it up or down to your preferred position.
  3. אבטח עם ברגים: Insert two appropriate M5 bolts (not included with the cage) through the cage's mounting slots and into the frame's threaded inserts.
  4. הידוק ברגים: Using an appropriate hex key, tighten the bolts evenly until the cage is secure. Do not overtighten, as this can damage the frame or the cage. Ensure the cage does not rotate or move when firm pressure is applied.
  5. Test Fit Bottle: Insert a water bottle into the cage to confirm a secure fit and proper clearance.
SILCA Sicuro Titanium Water Bottle Cage installed on a bicycle frame

תמונה 3: The water bottle cage securely installed on a bicycle frame, demonstrating proper alignment and fit.

הווידאו 1: מעלview of the Titanium Water Bottle Cage, demonstrating its features and installation process. This video is provided by the seller.

הוראות הפעלה

The SILCA Sicuro Titanium Water Bottle Cage is designed for straightforward use:

  • Inserting a Bottle: Gently slide your water bottle into the cage from the top. The cage's design ensures a snug fit, holding the bottle securely.
  • Removing a Bottle: Pull the water bottle firmly upwards to remove it from the cage. The cage's flexible yet secure design allows for easy in-and-out access during rides.
  • תְאִימוּת: This cage is optimized for standard bicycle water bottles.

תַחזוּקָה

To ensure the longevity and performance of your water bottle cage, follow these maintenance guidelines:

  • ניקוי: Wipe the cage with a damp cloth to remove dirt and grime. For stubborn marks, a mild soap solution can be used, followed by rinsing and drying.
  • בְּדִיקָה: Periodically inspect the cage for any signs of damage, such as cracks or bends. Check the mounting bolts for tightness and re-tighten if necessary.
  • טיפול בחומר: Titanium is highly corrosion-resistant. Avoid using abrasive cleaners or tools that could scratch the surface.

פתרון בעיות

לְהַנפִּיקסיבה אפשריתפִּתָרוֹן
Bottle feels loose in cage.Cage may have slightly widened over time or bottle is undersized.Gently bend the cage arms inward slightly to increase tension. Ensure your bottle is a standard size.
Bottle falls out during rides.Insufficient tension or improper bottle size.Adjust cage tension as described above. Verify bottle compatibility. For very rough terrain, consider additional bottle retention methods if issues persist.
Cage is rattling.ברגי הרכבה רופפים.Check and tighten the mounting bolts securely.

מפרטים

  • מותג: SILCA
  • דֶגֶם: Sicuro Titanium Water Bottle Cage (V2)
  • מספר דגם של פריט: SI/160877
  • חוֹמֶר: טִיטָן
  • צֶבַע: Rainbow (as per product variant)
  • מידות המוצר: אורך 7 אינץ', רוחב 4 אינץ', גובה 4 אינץ'
  • משקל פריט: 1.6 אונקיות
  • הַתאָמָה: 21mm Fore/Aft
  • UPC: 810093160877
  • ייצור: Hand bent and laser welded in Indiana, USA.

אחריות ותמיכה

For warranty information or technical support, please refer to the official SILCA webאתר או צרו קשר ישירות עם שירות הלקוחות שלהם. שמרו את הוכחת הרכישה שלכם לכל תביעת אחריות.

רִשְׁמִי Webאֲתַר: www.silca.cc

מסמכים קשורים - Sicuro Titanium Water Bottle Cage (V2, SI/160877)

מִרֹאשׁview מדריך התחלה מהירה של Silca Futura USA: התקנה ותפעול
התחילו במהירות עם מכונת חיתוך המפתחות Silca Futura USA. מדריך זה מכסה התקנה ראשונית, חיבור טאבלט, הגדרת תוכנה וניווט בסיסי לתפעול יעיל.
מִרֹאשׁview Manual de Instrucciones SILCA Twister II NA: Guía Completa de Uso y Mantenimiento
Manual de instrucciones detallado para la máquina duplicadora de llaves SILCA Twister II NA. התקנת קובייה, הפעלה, הפעלה, מדריכה וטכניקות ספציפיות לדופליקטים של קבוצות הפונדקאות, ריגטס (לאזר) ו-FICHET.
מִרֹאשׁview מכונת חיתוך מפתחות ידנית SILCA D844063ZB Fastbit
מכונת חיתוך מפתחות ידנית של Silca, ה-Fastbit D844063ZB מתאימה לשכפול סוגי מפתחות שונים, כולל ביט, ביט כפול (זכר ונקבה), מפתחות משאבה ומפתחות עצירה מרכזיים. היא כוללת עיצוב ידידותי למשתמש, חומרים באיכות גבוהה, נקודת מעקב מיקרומטרית קפיצית, ודלת מרכוז עצמי.ampובקרות ארגונומיות לפעולה מדויקת ואמינה.
מִרֹאשׁview מדריך הפעלה SILCA RW4 Plus: מדריך שכפול מפתחות טרנספונדר
מדריך הפעלה מקיף למכונת שכפול מפתחות טרנספונדר SILCA RW4 Plus. מכסה תכונות, התקנה, תפעול, תחזוקה ופתרון בעיות בתכנות מפתחות לרכב.
מִרֹאשׁview מדריך הפעלה למכונת חיתוך מפתחות Silca Twister II NA
מדריך הפעלה מקיף למכונת חיתוך המפתחות Silca Twister II NA, המפרט את מאפייניה, התקנה, תפעול, תחזוקה ונהלי בטיחות עבור סוגי מפתחות שונים כמו מפתחות גומות, מפתחות לייזר ומפתחות FICHET.
מִרֹאשׁview מדריך שירות SILCA TECHLA 3.0: מדריך הפעלה ותחזוקה
מדריך שירות מקיף למכונת החריטה וחיתוך המפתחות SILCA TECHLA 3.0. מכסה את תפעול המערכת, עדכונים, פתרון בעיות ונהלי תחזוקה לביצועים אופטימליים.