מדריך למשתמש של בקר מהירות חשמלי כפול של FLIPSKY FSESC6.7

1. הקדמה

This manual provides essential information for the proper installation, operation, and maintenance of your FLIPSKY Dual Electric Speed Controller FSESC6.7. This controller is designed for electric skateboards, e-bikes, scooters, robots, and similar applications, offering precise motor control and robust protection features. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. תכונות מוצר

• מצבי שליטה מרובים: Supports Current, Dutycycle, Speed, and Position control modes for versatile application.
• קושחה מתקדמת: Utilizes the latest firmware version, offering rich control interface and sensor support.
• Balancing Car Functionality: Supports balancing car applications by connecting an IMU module via the IIC interface. Compatible IMU modules include MPU9250, MPU9150, MPU6050, LSM6DS3, and BMI160.
• Robust Power Handling: Features a continuous current of 140A and an instantaneous current of 400A.
• כרך רחבtagטווח e: Operates within a voltage range of 14V-60V (4-13S cells), safely supporting 4S to 12S battery configurations. Note: Voltage spikes must not exceed 60V.
• עיצוב קומפקטי: Dimensions of 79.8mm x 66.8mm x 17.8mm make it suitable for various installations.

3. מפרטים

Note: It is recommended to keep firmware 5.2 from factory shipment. New firmware upgrades may potentially damage the ESC.

4. התקנה וחיווט

Proper wiring is crucial for the safe and effective operation of the FLIPSKY Dual Electric Speed Controller. Refer to the diagrams below for connection details.

איור 4.1: רֹאשׁ view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, showing the main board, capacitors, and connected motor and power wires. This image provides a general overview of the component layout.

איור 4.2: תַחתִית view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, illustrating the integrated aluminum anodized heat sink designed for efficient thermal management.

איור 4.3: Physical dimensions of the FLIPSKY Dual Electric Speed Controller FSESC6.7, indicating a length of 79.8mm, a width of 66.8mm, and a height of 17.8mm. These measurements are important for installation planning.

4.1. החיבור הסתייםview

The controller features various ports for power, motor connections, and communication with external devices. Ensure all connections are secure and correctly oriented.

איור 4.4: Comprehensive wiring diagram illustrating the connection points for the battery, two motors, and a receiver. Numbered labels correspond to specific ports on the ESC.

איור 4.5: Detailed pinout diagram for the various communication and sensor ports on the FSESC6.7. This includes pin assignments for SWD (1, 6), COMM (2, 7), CAN (3, 8), USB (4, 9), and SENSE (5, 10) interfaces.

4.2. נקודות חיבור

• חיבור סוללה: Connect your battery pack (4-13S, 14V-60V) to the main power cables (14AWG with XT90 connector). Ensure correct polarity.
• חיבורי מנוע: Connect the two motors to the designated motor wire outputs (12AWG).
• חיבור מקלט: Connect your PPM receiver to the appropriate input port for control signals.
• יציאת USB: Use the USB port for configuration and firmware updates (if applicable).
• אוטובוס CAN: For multi-ESC setups or communication with other CAN-enabled devices.
• UART, SPI, IIC: These ports support various sensors and communication protocols, including IMU modules for balancing applications.

5. הוראות הפעלה

The FLIPSKY FSESC6.7 offers flexible control options and is programmable to suit various motor types and application requirements.

5.1. מצבי שליטה

The controller supports four primary control modes:

• שליטה נוכחית: Regulates the motor current.
• Dutycycle Control: Controls the motor speed based on the PWM duty cycle.
• בקרת מהירות: Maintains a desired motor RPM.
• בקרת מיקום: Controls the motor to a specific angular position.

5.2. קושחה ותצורה

The ESC is programmable, allowing for customization of parameters. It is strongly recommended to maintain the factory-shipped firmware version 5.2. Upgrading to newer firmware versions carries a risk of damaging the ESC. Consult official FLIPSKY resources for any firmware-related guidance.

6. תחזוקה

To ensure the longevity and reliable performance of your FLIPSKY Dual Electric Speed Controller, follow these general maintenance guidelines:

• שמור על ניקיון ויבש: Regularly inspect the ESC for dust, dirt, or moisture. Clean with a soft, dry brush or compressed air. Avoid exposure to water or high humidity.
• בדוק חיבורים: Periodically check all wiring connections for looseness, corrosion, or damage. Secure any loose connections.
• ניהול תרמי: Ensure adequate airflow around the heat sink, especially during operation. Avoid obstructing the heat sink.
• הימנע מנזק פיזי: Protect the ESC from impacts or excessive vibrations.

7. פתרון תקלות

The FLIPSKY FSESC6.7 incorporates several protection functions to safeguard the unit and connected components. Understanding these can help in diagnosing issues.

7.1. פונקציות הגנה

• כרך נמוךtagהגנה אלקטרונית: מופעל אם עוצמת הסוללהtage drops below a safe threshold, preventing over-discharge.
• כרך גבוהtagהגנה אלקטרונית: Engages if the input voltage exceeds the maximum limit (60V), protecting against over-voltage.
• הגנה מפני זרם יתר: Limits current flow to prevent damage from excessive load.
• Temperature Abnormality Protection: Monitors internal temperature and reduces power or shuts down if temperatures become critical.
• MOSFETs Over-Temperature Protection: Specifically protects the MOSFETs from overheating.

7.2. General Troubleshooting Steps

• אין כוח: Check battery connections, battery charge level, and main power switch.
• מנוע לא מגיב: Verify motor connections, sensor connections (if applicable), and receiver signal. Check ESC configuration for correct motor type and control mode.
• פעולה לסירוגין: Inspect all wiring for loose connections or damage. Check for signs of overheating.
• Error Codes/LED Indicators: Refer to the FLIPSKY software documentation for specific error codes or LED blink patterns, if available.

8. מידע על אחריות

The FLIPSKY Dual Electric Speed Controller FSESC6.7 comes with a warranty period of 2 months or more. Please retain your proof of purchase for warranty claims. The warranty typically covers manufacturing defects but may not cover damage resulting from improper installation, misuse, unauthorized modifications, or firmware upgrades not explicitly recommended by the manufacturer.

9. תמיכה

For technical assistance, product inquiries, or warranty support, please contact FLIPSKY customer service. Our support team is available to help resolve any issues you may encounter with your product.

מידע ליצירת קשר: Please refer to the official FLIPSKY webבאתר או במסמכי הרכישה שלך לקבלת פרטי הקשר העדכניים ביותר.