Lorex 4K 16-Channel NVR User Manual

1. הקדמה

The Lorex 4K 16-Channel NVR (Network Video Recorder) is a sophisticated surveillance solution designed to capture and manage high-resolution video footage. This NVR supports up to 4K (8MP) resolution recording, ensuring detailed and clear video evidence. It features smart motion detection, voice control capabilities, and fusion technology for enhanced security monitoring.

Equipped with a built-in Hard Disk Drive (HDD) and supporting up to two 10TB drives, the NVR provides ample storage for 24/7 recording. Its plug-and-play Power-over-Ethernet (PoE) installation simplifies camera connections, making setup efficient. The system also supports audio recording on every channel and includes an auto-recovery feature to ensure continuous surveillance even after power interruptions.

איור 1.1: חזית view of the Lorex 4K 16-Channel NVR, showcasinהעיצוב החלקלק ובקרות הפאנל הקדמי שלו.

2. התקנה והתקנה

This section guides you through the initial setup and physical installation of your Lorex NVR system. Ensure all components are present before beginning.

2.1 פירוק ובדיקת רכיבים

Carefully unpack the NVR and all accessories. Verify that the following items are included:

• Lorex 4K 16-Channel NVR unit
• מתאם מתח
• עכבר USB
• כבל Ethernet
• כבל HDMI
• מדריך התחלה מהירה (אם רלוונטי)

2.2 חיבור ה-NVR

Follow these steps to connect your NVR:

1. חיבור לתצוגה: Use the provided HDMI cable to connect the NVR's HDMI output port to an HDMI input on your monitor or TV. This is essential for initial setup and direct viewing.
2. חיבור עכבר USB: חבר את עכבר ה-USB לכל יציאת USB זמינה ב-NVR (קדמית או אחורית).
3. חיבור רשת: Connect one end of the Ethernet cable to the NVR's LAN port and the other end to your router or network switch. This provides network access for remote viewing and updates.
4. Connect Cameras (PoE): For Lorex PoE cameras, connect them directly to the NVR's PoE ports using Ethernet cables. The NVR will provide both power and video signal through these ports, simplifying wiring. The NVR features 16 PoE ports.
5. הפעלה: חבר את ספק הכוח לכניסת החשמל של ה-NVR ולאחר מכן חבר אותו לשקע חשמל. ה-NVR יופעל אוטומטית.

Figure 2.1: Rear panel of the NVR, illustrating the various input/output ports including HDMI, VGA, Ethernet (LAN and PoE), USB, and audio connections.

Figure 2.2: Diagram illustrating the simplicity of Power over Ethernet (PoE) connectivity, where a single Ethernet cable provides both power and data to the camera from the NVR.

3. תפעול

This section covers the basic operation of your Lorex NVR, including live viewהקלטה, ניגון.

3.1 אשף ההתקנה הראשונית

Upon first power-on, the NVR will guide you through an initial setup wizard. This wizard typically includes:

• בחירת שפה
• Password creation for the admin account
• הגדרות תאריך ושעה
• Network configuration (DHCP is usually default)
• Hard drive initialization (if prompted)

3.2 בשידור חי View

After completing the setup wizard, the NVR will display the live view של כל המצלמות המחוברות. ניתן לעבור בין מצלמה בודדת view, multi-camera grids, and sequence views using the on-screen controls or the USB mouse.

• רזולוציית 4K: ה-NVR תומך בשידור חי viewing in up to 4K (8MP) resolution at 30 frames per second (fps) for compatible cameras.
• זום דיגיטלי: Use the digital zoom feature to magnify specific areas of interest in the live view.
• ניטור אודיו: The NVR supports audio on every channel, allowing you to hear audio from cameras with built-in microphones or connected external microphones.

3.3 הקלטה והשמעה

The NVR is configured for 24/7 continuous recording by default. It also supports event-based recording triggered by motion detection.

• חכם תנועה זיהוי: Leverage advanced motion detection features to reduce false alerts and trigger recordings only when a person or vehicle is detected.
• Area Search: Utilize the Area Search function to quickly locate events by pinpointing activity in specific zones during playback.
• השמעה: גישה foo מוקלטtage through the playback menu. You can search by date, time, and event type.
• אִחסוּן: The NVR comes with a built-in 4TB HDD and supports up to two 10TB hard drives for extensive storage capacity. Storage mirroring can be configured for continuous data backup.

3.4 Remote Access (Lorex Cloud App)

The Lorex Cloud app allows you to view פו חיtage, play back recordings, and receive motion push notifications on your smartphone or tablet. Download the app from your device's app store and follow the in-app instructions to add your NVR.

4. תחזוקה

Proper maintenance ensures the longevity and optimal performance of your Lorex NVR system.

4.1 טיפול כללי

• יש לשמור את ה-NVR באזור מאוורר היטב כדי למנוע התחממות יתר.
• Avoid exposing the NVR to direct sunlight, moisture, or extreme temperatures.
• נקו את החלק החיצוני של ה-NVR בעזרת מטלית רכה ויבשה. אין להשתמש בחומרי ניקוי נוזליים או בתרסיסים.

4.2 ניהול כונן קשיח

הכונן הקשיח של ה-NVR ידרוס אוטומטית את הקבצים הישנים ביותרtage once it reaches full capacity. No manual intervention is typically required for continuous recording.

• יְכוֹלֶת: The NVR supports up to two 10TB hard drives. If you wish to expand storage, consult the Lorex support website for compatible drives and installation instructions.
• גיבוי נתונים: For critical footage, regularly back up important video clips to an external USB drive or network storage.

4.3 עדכוני קושחה

בדקו מעת לעת את תמיכת לורקס website for firmware updates. Firmware updates can improve system performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update carefully.

4.4 התאוששות מהפסקת חשמל

The NVR features auto-recovery after power failures. In the event of a power outage, the system is designed to automatically reboot and resume recording once power is restored, ensuring minimal disruption to your surveillance.

5. פתרון תקלות

This section provides solutions to common issues you might encounter with your Lorex NVR.

5.1 אין פלט וידאו על המסך

• בדוק כבלים: Ensure the HDMI or VGA cable is securely connected to both the NVR and the display. Try a different cable or display if possible.
• קלט תצוגה: Verify that your monitor or TV is set to the correct input source (e.g., HDMI 1, VGA).
• כוח NVR: Confirm the NVR is powered on and its power indicator light is active.
• תאימות רזולוציה: If the display supports lower resolutions, try connecting the NVR to a different display or consult the NVR's manual for instructions on changing output resolution (if accessible).

5.2 מצלמות אינן מוצגות

• Power over Ethernet (PoE): Ensure cameras are properly connected to the NVR's PoE ports. Check if the PoE port indicator lights on the NVR are active for the connected cameras.
• שלמות כבל: Inspect Ethernet cables for any damage. Try swapping cables or ports.
• תְאִימוּת: This NVR is designed for use with Lorex IP cameras. Compatibility with third-party cameras is not guaranteed.
• Camera Power Cycle: Disconnect and reconnect the camera's Ethernet cable to power cycle it.

שלט אחד Viewing Issues (Lorex Cloud App)

• חיבור רשת: Ensure the NVR is connected to the internet via its LAN port and your router. Verify your mobile device has a stable internet connection.
• NVR Online Status: Check the NVR's network settings to confirm it has obtained an IP address and is showing as "online" or "connected" to the Lorex Cloud service.
• Substream for Remote Viewing: For optimal performance over mobile networks or slower internet connections, the Lorex Cloud app often defaults to a lower-resolution substream. This is normal behavior to ensure smooth streaming. Full 4K resolution is typically best viewed directly from the NVR's HDMI output.
• הגדרות נתב: Ensure your router is not blocking necessary ports for the NVR's cloud connection. Consult your router's manual or ISP for port forwarding information if needed, though Lorex Cloud usually uses P2P for simpler setup.
• Wi-Fi Extenders/Mesh Networks: Some network configurations, particularly those using Wi-Fi extenders or mesh networks that suppress broadcast packets, may interfere with the NVR's ability to communicate with cameras or the cloud service. Ensure the NVR and cameras are on the same logical network segment.

5.4 Hard Drive Not Recording

• מצב הדיסק הקשיח: Check the NVR's system settings to verify the hard drive status. It should be "Normal" or "Initialized". If not, you may need to format or initialize the HDD.
• לוח ההקלטות: Ensure the recording schedule is properly configured for continuous or motion-triggered recording.
• HDD Fault: If the hard drive is faulty, it may need replacement. Contact Lorex support for assistance.

6. מפרטים

Detailed technical specifications for the Lorex 4K 16-Channel NVR (Model N882A64B).

7. אחריות ותמיכה

For warranty information, technical support, or further assistance with your Lorex NVR, please refer to the official Lorex webאתר או צרו קשר ישירות עם שירות הלקוחות שלהם. שמרו את קבלת הרכישה ואת מספר הסידורי של המוצר בהישג יד לקבלת שירות מהיר יותר.

You can also find additional resources, FAQs, and software downloads on the Lorex support portal.

משאבים מקוונים:

• לורקס רשמי Webאֲתַר: www.lorex.com
• Lorex Cloud App: Available on iOS App Store and Google Play Store.