מָבוֹא
This manual provides comprehensive instructions for the SHARP Digital Alarm with AccuSet. This automatic smart clock is designed for ease of use, eliminating the need for manual time adjustments. Its clear, bright LED display and intuitive controls make it an ideal timekeeping solution for any room.
The SHARP Digital Alarm Clock seamlessly integrates into your bedroom decor.
תכונות המוצר
- AccuSet Automatic Time Set: Pre-programmed time for immediate use.
- Quick Daylight Savings Time (DST) Adjustment: Simple switch for time changes.
- High/Low Dimmer Control: Adjustable display brightness for comfort.
- Back up Battery: Pre-installed CR2032 battery maintains time settings during power outages.
- בחירת אזור זמן: Easily select your local time zone.
מֵעַלview of the SHARP Digital Alarm Clock's primary features.
הגדרה
- פרק את השעון: הוציאו בזהירות את השעון מאריזתו.
- בחר אזור זמן: Locate the time zone switch on the bottom of the clock. Select your appropriate time zone (EST, CST, MST, PST) before plugging in the unit.
- לִתְקוֹעַ תֶקַע: Connect the power cord to an approved electrical outlet. The clock will automatically set to the correct time based on your time zone selection.
- הגדרת שעון קיץ (DST): If applicable, slide the DST switch on the bottom of the clock to 'ON' to add one hour (+1 hr.) for Daylight Saving Time, or 'OFF' to subtract one hour (-1 hr.) for Standard Time.
The main unit of the SHARP Digital Alarm Clock, ready for setup.
הוראות הפעלה
הגדרת האזעקה
The alarm function is controlled by buttons located on the top of the clock.
- הגדרת זמן אזעקה: Press and hold the 'ALARM' button. While holding, press the 'HOUR' button to adjust the alarm hour and the 'MINUTE' button to adjust the alarm minute. Release the 'ALARM' button when finished.
- הפעלה/ביטול של אזעקה: Press the 'ALARM ON/OFF' button to toggle the alarm function. An 'ALARM' indicator light on the front display will illuminate when the alarm is active.
- פונקצית נודניק: When the alarm sounds, press the large 'SNOOZE' button on top to temporarily silence the alarm for a short period. The alarm will sound again after the snooze period ends.
בקרת דימר
Adjust the brightness of the LED display to your preference using the 'DIMMER HI/LO' switch located on the top left of the clock.
- Slide the switch to 'HI' for a brighter display.
- Slide the switch to 'LO' for a dimmer display, suitable for nighttime viewing.
מְפוֹרָט view of the top panel controls for time and alarm settings.
The clock's display with the dimmer function activated, showing reduced brightness.
גיבוי סוללה
The clock includes a pre-installed CR2032 button cell battery. This battery is used to maintain the time settings in the event of a power interruption, ensuring that you do not need to reset the time when power is restored. The battery is located in a screw-secured compartment at the bottom of the clock and is designed to last for several years.
כדי להחליף את הסוללה:
- Unplug the clock from the electrical outlet.
- אתר את תא הסוללה בתחתית השעון.
- Unscrew the cover and remove the old CR2032 battery.
- הכנס סוללת CR2032 חדשה, תוך הקפדה על קוטביות נכונה.
- החזר את המכסה והברג אותו היטב.
- Plug the clock back into the electrical outlet.
מפרטים
| תכונה | תֵאוּר |
|---|---|
| מותג | חַד |
| דֶגֶם | B08TG8W2QD |
| צֶבַע | Midnight Black-white Led |
| סוג תצוגה | דִיגִיטָלי |
| תכונה מיוחדת | Automatic Set |
| מידות המוצר | רוחב 5.5 אינץ' x גובה 2.6 אינץ' |
| מקור כוח | חשמלי עם חוט, מופעל על סוללה |
| סוללת גיבוי | CR2032 (pre-installed) |
| משקל פריט | 10.2 אונקיות (0.29 קילוגרם) |
| חומר מסגרת | פּלָסטִי |
Physical dimensions of the alarm clock.
פתרון בעיות
- Time Not Setting Automatically: Ensure the time zone switch on the bottom is correctly set for your region. Verify the clock is securely plugged into a working electrical outlet. The internal CR2032 battery is for backup and does not power the main display.
- תצוגה בהירה/עמומה מדי: Use the 'DIMMER HI/LO' switch on the top of the clock to adjust the display brightness to your preference.
- אזעקה לא נשמעת: Check that the 'ALARM ON/OFF' button has been pressed and the 'ALARM' indicator light on the front display is illuminated. Ensure the alarm time is correctly set.
- Time Reset After Power Outage: If the time resets after a power outage, the internal CR2032 backup battery may be depleted or improperly installed. Refer to the 'Battery Backup' section for replacement instructions.
תַחזוּקָה
To ensure the longevity and optimal performance of your SHARP Digital Alarm Clock, follow these simple maintenance guidelines:
- ניקוי: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- החלפת סוללה: Replace the CR2032 backup battery every few years or if the clock fails to retain time during a power interruption. Refer to the 'Battery Backup' section for detailed instructions.
- מיקום: הנח את השעון על משטח יציב ושטוח הרחק מאור שמש ישיר, חום מוגזם או לחות.
אחריות ותמיכה
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official SHARP webאתר. שמור את קבלת הרכישה שלך, שכן ייתכן שיידרש הוכחת קנייה לצורך תביעות אחריות.
