1. הקדמה
The KING KB ECO2S+ series unit heater provides efficient and user-friendly heating for various spaces. This model, KB2405-1-ECO2S-PLUS, features a 5KW / 240V power output, 2-stage heating, and an integrated electronic thermostat with a remote control and remote temperature sensor for optimal comfort and energy savings. It is designed for use as primary or supplemental heat sources in warehouses, stores, or large garages.
תכונות עיקריות:
- Smart ECO2S+ Energy-Saving Design
- 2-Stagחימום: משתמש אוטומטית בלחץ הנמוך ביותרtage needed for heating.
- Includes ECO2S+ Remote Temperature Sensor for precise temperature monitoring.
- Built-In Provision for Optional 24V Remote Thermostat, compatible with NEST and other 24V Wi-Fi thermostats.
- Integrated fan-only and timer modes.
- Spiral steel elements and high CFM for even air distribution and prolonged heater life.
- Universal wall/ceiling bracket for simple installation.
2. מידע בטיחות חשוב
Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- בטיחות חשמל: Installation must be performed by a qualified electrician in accordance with all applicable local, state, and national electrical codes. Ensure the power supply is disconnected before any service or installation.
- הַרכָּבָה: Securely mount the heater using the provided universal bracket to a structural support capable of holding the unit's weight. Maintain proper clearances from combustible materials as specified in the installation section.
- מִבצָע: Do not operate the heater with the grill removed. Do not block air inlets or outlets. Keep flammable materials away from the heater.
- תַחזוּקָה: נתק את החשמל לפני ניקוי או ביצוע כל תחזוקה.
3. תכולת החבילה
ודא שכל הפריטים נמצאים ולא ניזוקו בעת פתיחת החבילה:
- KING KB ECO2S+ Unit Heater (5KW / 240V)
- תושבת הרכבה אוניברסלית לקיר/תקרה
- שְׁלַט רָחוֹק
- ECO2S+ Remote Temperature Sensor
- Heavy-Duty Pigtail (for electrical connection)
- Installation Hardware (lag bolts, nuts, grommet)
- מדריך למשתמש
This image displays the main heater unit, a black remote control, a white remote temperature sensor, and a grey universal mounting bracket, all included in the product package.
4. התקנה
4.1 התקנת גוף החימום
The universal mounting bracket allows for both wall and ceiling installation. Ensure the mounting surface is structurally sound to support the heater's weight (approximately 40 lbs). Use appropriate lag bolts or expansion bolts provided in the hardware pack.
- Attach the universal bracket to the desired wall or ceiling location using appropriate fasteners.
- Align the heater unit with the bracket and secure it using the large knobs on the sides, allowing for angle adjustment.
- Adjust the heater angle to direct airflow as needed. The bracket offers four adjustable positions.
This image shows the back of the grey heater unit with a protective grill covering the fan. Mounting holes are visible on the sides for attaching the universal bracket.
4.2 חיווט חשמלי
This heater requires a 240V dedicated circuit. Installation must be performed by a licensed electrician. The 5KW model typically requires a 40-amp breaker and 4-8 AWG copper wire. Ensure all local electrical codes are followed.
- נתק חשמל: Turn off power at the main circuit breaker before beginning any wiring.
- תא חיווט גישה: Locate and remove the single Phillips screw on the side panel to open the wiring compartment.
- Remove Knockout: Select an appropriate knockout on the side of the heater for your wiring. Use pliers to remove the knockout.
- Install Strain Relief: Insert the provided grommet with integral strain relief into the knockout hole.
- חיבור חוטים:
- חבר את החוט השחור להדק L1.
- חבר את החוט האדום להדק L2.
- Connect the green (ground) wire to the grounding screw.
- חיווט מאובטח: Tighten the strain relief to prevent the wire from pulling out and to protect the wiring from damage.
- סגור תא: Reattach the access panel with the Phillips screw.
- החזר כוח: Turn on power at the main circuit breaker.
This image shows the internal wiring compartment of the heater with various colored wires connected to terminals (L1, L2, and ground) and a circuit board. A label indicates "Red Wire L2" and "Black Wire L1" for 240V, 4-8AWG connections.
Video 1: This video demonstrates the electrical wiring process for the KING KB ECO2S+ heater, showing how to connect the power cable to the internal terminals and secure it with a strain relief. It also highlights the 2-stage heating feature and remote temperature sensing.
4.3 External Thermostat Switch
On the back of the heater, there is a toggle switch to select between the built-in thermostat (setting I) and an external thermostat (setting II). For most applications using the integrated controls, ensure the switch is set to 'I'. If connecting to an external 24V thermostat (e.g., Nest), set the switch to 'II' and ensure proper wiring by a licensed electrician.
5. הוראות הפעלה
5.1 הפעלה ראשונית
Upon initial power-up, the unit will beep, and the display will show the current room temperature. This indicates correct voltage וספק כוח.
5.2 לוח בקרה ושלט רחוק
The heater can be operated via the integrated control panel or the included remote control. The remote control offers convenient access to all functions from a distance.
This image shows the front of the grey heater unit with horizontal louvers and a digital control panel at the bottom. The control panel has buttons for Power, Mode, Start/Stop, and Up/Down arrows, along with a digital temperature display.
מצבי הפעלה של 5.3
Press the 'Mode' button to cycle through the available operating modes:
- חום נמוך: Provides a lower heat output.
- מצב לסביבה: מתאים אוטומטית את הכמותtage to the lowest level needed to maintain the set temperature, optimizing energy efficiency.
- מאוורר בלבד: Circulates air without heating, useful for summer or general ventilation.
- חום גבוה: מספק תפוקת חום מקסימלית.
5.4 הגדרת טמפרטורה
Use the Up/Down arrow buttons on the control panel or remote to set your desired temperature. The heater will maintain this temperature automatically.
5.5 פונקציית טיימר
The timer mode allows you to set the heater to run for a predetermined length of time, after which it will automatically shut off. This feature helps conserve energy and provides convenience.
6. תחזוקה
תחזוקה שוטפת מבטיחה ביצועים אופטימליים ואורך חיים של התנור שלכם. יש לנתק תמיד את החשמל לפני ביצוע כל תחזוקה.
- ניקוי: יש לנקות מעת לעת את החלק החיצוני של התנור בעזרת מטלית רכהamp cloth. Ensure the air inlets and outlets are free from dust and debris. Do not use abrasive cleaners or solvents.
- בדיקות: Annually inspect electrical connections for tightness and signs of wear. Check the mounting bracket for security.
- אוהד: Ensure the fan operates smoothly and is free from obstructions.
7. פתרון תקלות
If your heater is not functioning correctly, refer to the following common issues and solutions:
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| Heater does not turn on / No display. | No power to the unit or incorrect voltage. | Check circuit breaker. Ensure 240V power is supplied. Verify wiring connections are secure. |
| החימום דולק אך אינו מייצר חום. | Thermostat switch set to external, or external thermostat not calling for heat. | Ensure the external thermostat switch on the back of the unit is set to 'I' for internal thermostat control. If using an external thermostat, check its settings. |
| חימום לא מספק. | Incorrect mode selected, or obstructions. | Select 'High Heat' mode. Ensure air inlets/outlets are clear. Check louvers are directed appropriately. |
| השלט רחוק לא עובד. | סוללות מתות או חסימה. | Replace remote control batteries. Ensure no obstructions between remote and heater. |
8. מפרטים
- מותג: מֶלֶך
- דֶגֶם: KB2405-1-ECO2S-PLUS
- תפוקת חשמל: 5KW
- כרך ידtage: 240V
- Ampעידן: 20.8 Amps
- מספר מהירויות: 2 (נמוך, גבוה)
- סוג דלק: חַשׁמַלִי
- מאפיינים מיוחדים: Energy Efficient, Remote Control, Remote Temperature Sensor, 2-Stagחימום
- צֶבַע: שָׁחוֹר
- גורם צורה: אָרוֹן
- שימוש בפנים/חוץ: מקורה
- סוג הרכבה: Wall Mount (Universal bracket included)
- מידות המוצר: 16.5 x 15 x 13.5 אינץ'
- משקל פריט: 40 פאונד
- UPC: 093319332399
- זמין ראשון: 29 בספטמבר 2020
This chart provides guidance on selecting the appropriate heater wattage based on garage size (1-car to 4-car garages), square footage, BTU, CFM, and amperage. The 5KW model is suitable for 1-car garages up to 450 sq. ft.
9. אחריות ותמיכה
For specific warranty details, please refer to the documentation included with your product or contact KING customer support. General product protection plans may be available for purchase separately.
- החזרות: This product typically offers a 30-day easy return policy.
- תוכניות הגנה: Optional 4-Year Protection Plans and Complete Protect monthly plans may be available for extended coverage.
- תמיכת לקוחות: For technical assistance or service inquiries, please visit the KING store on Amazon or refer to the contact information provided in your product packaging.
Visit the official KING Store for more information: KING Store
