1. הקדמה
The Fender Acoustic Junior GO amplifier is designed to provide full, natural sound for acoustic-electric guitars and vocals. This portable system features two independent channels, each equipped with studio-quality effects. Key functionalities include Bluetooth wireless audio streaming and an integrated 90-second looper, making it suitable for various performance settings. Its rechargeable battery allows for extended use without a power outlet.

2. התקנה
2.1. פורקים
הסר בזהירות את ampהוצא את המתקן מהאריזה שלו. שמור את כל חומרי האריזה להובלה או אחסון עתידיים. בדוק את amplifier for any signs of damage. If damage is present, contact your retailer immediately.
2.2. הפעלה וטעינה
The Acoustic Junior GO amplifier is equipped with a rechargeable lithium-ion battery. For initial use, it is recommended to fully charge the battery. Connect the provided power adapter to the amplifier's power input and then to a suitable electrical outlet. The charging indicator will illuminate. A full charge provides approximately 5 hours of playing time at full volume or 12 hours at moderate volume. The amplifier can also be operated while connected to AC power.
2.3. חיבור מכשירים ומיקרופונים
ה amplifier features two independent channels:
- הערוץ 1: Designed for acoustic-electric guitars. Connect your instrument using a standard 1/4-inch instrument cable.
- הערוץ 2: Designed for microphones. Connect your microphone using an XLR cable. This channel also supports 1/4-inch instrument inputs.
ודא שכל החיבורים מאובטחים לפני הדלקת ampחיים יותר.

3. הוראות הפעלה
3.1. בקרות ערוצים
Each channel features independent controls for volume, equalization (bass, middle, treble), and effects. Adjust these controls to achieve your desired sound. Experiment with different settings to find the optimal tone for your instrument or voice.
3.2. זיווג Bluetooth
To stream audio wirelessly from a phone or tablet:
- הפעל את Bluetooth במכשיר הנייד שלך.
- Press the Bluetooth pairing button on the amplifier. The indicator light will flash.
- Select 'Fender Acoustic Junior GO' from the list of available devices on your mobile device.
- Once paired, the indicator light will remain solid, and you can stream audio through the ampחיים יותר.
3.3. פונקציית לופר
The onboard 90-second looper allows for recording and layering audio. The looper controls include:
- Record/Dub: Press once to start recording. Press again to overdub.
- הפעלה/עצירה: Press once to play the loop. Press again to stop.
- לְבַטֵל: Reverts the last overdub.
Refer to the detailed looper section in the full manual for advanced techniques.
3.4. Tilt-Back Kickstand
ה amplifier features an integral tilt-back kickstand. This allows you to angle the amplifier upwards, directing the sound more effectively towards the performer or audience, especially in smaller venues or when placed on the floor.
4. תחזוקה
4.1. ניקיון
כדי לנקות את ampלמסיר, השתמש במטלית רכה ויבשה. עבור לכלוך עיקש, השתמש במטלית רכה ויבשה.amp cloth may be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2. אחסון
אחסן את amplifier in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
4.3. טיפול בסוללה
To maximize the life of the lithium-ion battery:
- הימנעו מפריקת הסוללה באופן מלא באופן קבוע.
- אל תחשוף את ampלימר לחום או קור קיצוניים.
- אם ה amplifier will not be used for several months, charge it to approximately 50% every 3-6 months.
5. פתרון תקלות
This section addresses common issues you might encounter with your Fender Acoustic Junior GO ampחיים יותר.
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| אין פלט קול | Volume controls are low; cables are not connected properly; instrument/microphone issue; ampהמפיץ לא מופעל. | Check all volume knobs (master, channel, instrument/mic). Ensure cables are securely connected. Verify instrument/microphone functionality. Confirm ampהמכשיר דולק וטעון. |
| בלוטות' לא מתאמת | Bluetooth not activated on device; amplifier not in pairing mode; device too far. | Ensure Bluetooth is enabled on your device. Press the amplifier's Bluetooth button to enter pairing mode. Move your device closer to the ampחיים יותר. |
| לופר לא מקליט/מנגן | Incorrect button sequence; looper memory full (unlikely for 90s). | Review the looper operating instructions. Ensure you are pressing the correct buttons for record, dub, play, and stop. |
| צליל מעוות | Input signal too high; volume too high; faulty cable. | Reduce the input gain or volume on the instrument/microphone channel. Lower the master volume. Try a different cable. |
6. מפרטים
| תכונה | פְּרָט |
|---|---|
| שם הדגם | Acoustic Junior GO |
| מספר דגם | 2314400000 |
| מותג | פָּגוֹשׁ |
| פלט וואטtage | 100 וואט |
| מידות המוצר | 16 x 20 x 16 אינץ' (גובה x רוחב x עומק) |
| משקל פריט | 20.6 פאונד |
| סוג סוללה | ליתיום-יון נטענת |
| חיי סוללה | Up to 5 hours (full volume), 12 hours (moderate volume) |
| קישוריות | Bluetooth, 1/4-inch instrument input, XLR microphone input |
| לופר | 90-second with Record/Dub, Play/Stop, Undo |
| כרך ידtage | כרך אוניברסליtage לשימוש עולמי |
7. אחריות ותמיכה
Fender products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please visit the official Fender website or contact Fender customer service. Keep your proof of purchase for warranty claims.
תמיכה מקוונת: www.fender.com/support





