המוצר נגמרview
The DELTA D75624SS is a 24-inch towel bar designed for bathroom use. It features a durable zinc construction with a stainless finish, providing both functionality and a modern aesthetic. This manual provides detailed instructions for safe installation, operation, and maintenance.
Image: DELTA D75624SS 24-inch Towel Bar. This image displays the complete towel bar assembly, including the bar and mounting posts, in a stainless steel finish.
מידע בטיחות
אנא קרא בעיון את כל ההוראות לפני ההתקנה והשימוש. אי הקפדה על הוראות אלה עלולה לגרום נזק לרכוש או לפציעה.
- יש ללבוש תמיד ציוד בטיחות מתאים, כגון משקפי מגן, במהלך ההתקנה.
- Ensure the mounting surface is structurally sound and capable of supporting the towel bar and the weight of towels.
- Do not overtighten screws, as this may damage the product or mounting surface.
- הרחק חלקים קטנים מילדים.
- אם אינך בטוח לגבי חלק כלשהו בתהליך ההתקנה, התייעץ עם איש מקצוע מוסמך.
תוכן החבילה
ודא שכל הרכיבים קיימים לפני תחילת ההתקנה. אם חסרים או פגומים חלקים כלשהם, אין להמשיך בהתקנה ופנה לתמיכת הלקוחות.
- Towel Bar Assembly (1)
- סוגרי הרכבה (2)
- ברגי הרכבה (4)
- Wall Anchors (4) (for drywall installation)
- מפתח משושה (1)
כלים נדרשים
הכלים הבאים נדרשים בדרך כלל להתקנה:
- עִפָּרוֹן
- סרט מדידה
- מברג פיליפס
- Drill with appropriate drill bit (e.g., 1/4 inch for drywall anchors)
- רָמָה
הוראות התקנה
Follow these steps to properly install your DELTA D75624SS 24-inch towel bar.
שלב 1: קבע את מיקום ההרכבה
Choose a suitable location on your wall. Use a measuring tape and level to mark the desired height and ensure the towel bar will be level. The distance between the centers of the two mounting posts should be approximately 24 inches.
Step 2: Prepare Mounting Brackets
Separate the mounting brackets from the towel bar posts by loosening the set screws located on the underside of each post using the provided hex wrench. Keep the set screws and hex wrench in a safe place.
Step 3: Mark Drill Holes
Hold one mounting bracket against the wall at your marked location. Use a pencil to mark the positions for the two screw holes. Repeat this process for the second mounting bracket, ensuring it is level with the first and at the correct distance.
שלב 4: קדוח חורים של טייס
Using a drill, create pilot holes at the marked locations. If drilling into a wall stud, use a smaller drill bit appropriate for the mounting screws. If drilling into drywall without a stud, use a drill bit sized for the wall anchors (typically 1/4 inch). Insert the wall anchors flush with the wall surface if required.
Step 5: Secure Mounting Brackets
Align each mounting bracket with its respective pilot holes (and anchors, if used). Secure the brackets to the wall using the provided mounting screws and a Phillips head screwdriver. Ensure the brackets are firmly attached and level.
Step 6: Attach Towel Bar Posts
Slide the towel bar posts over the secured mounting brackets. Ensure the set screw holes on the underside of the posts align with the brackets. The towel bar should be centered between the posts.
Step 7: Tighten Set Screws
Using the hex wrench, tighten the set screws on the underside of each post. Tighten until the posts are securely fastened to the mounting brackets and the towel bar does not wobble. Do not overtighten.
הוראות הפעלה
The DELTA D75624SS towel bar is designed for holding towels and other lightweight bathroom textiles. Ensure items placed on the bar do not exceed its structural capacity. Avoid hanging heavy objects or using the bar as a grab handle.
תחזוקה וטיפול
To maintain the finish and appearance of your towel bar, follow these cleaning guidelines:
- יש לנקות באופן קבוע בעזרת מטלית רכהamp בַּד.
- עבור כתמים עקשניים, השתמשו בתמיסת סבון עדינה ומים.
- Rinse thoroughly with clean water and dry immediately with a soft cloth to prevent water spots.
- אל תעשה use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
פתרון בעיות
If you encounter issues with your towel bar, refer to the following common solutions:
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| Towel bar feels loose or wobbly. | Set screws are not fully tightened, or mounting brackets are loose. | Ensure the set screws on the underside of the posts are securely tightened with the hex wrench. Check if the mounting screws securing the brackets to the wall are tight. If wall anchors were used, ensure they are properly seated. |
| שריטות או נזק לגימור. | Use of abrasive cleaners or sharp objects. | Avoid using abrasive materials for cleaning. Minor scratches may be polished with a non-abrasive metal polish suitable for stainless steel, if desired. |
מפרטים
| תכונה | פְּרָט |
|---|---|
| מספר דגם | D75624SS |
| מותג | דֶלתָא |
| חוֹמֶר | אָבָץ |
| סוג גימור | אל חלד |
| צֶבַע | אל חלד |
| מידות המוצר | 3.63 x 27.13 x 1.88 אינץ' (עומק x רוחב x גובה) |
| משקל פריט | 1.33 פאונד |
| UPC | 034449896597 |
אחריות ותמיכה
This DELTA product is covered by the manufacturer's limited warranty. For specific warranty details, claims, or technical support, please refer to the official DELTA website or contact their customer service department directly. Keep your proof of purchase for warranty purposes.
DELTA Customer Support:
- Webאֲתַר: www.deltafaucet.com
- טלפון: עיין ב webאתר למספרי קשר אזוריים.
