ElectraStim Flux Electro-Stimulator User Manual

מָבוֹא

The ElectraStim Flux is a versatile electro-stimulator designed for a wide range of applications. It features powerful outputs, an intuitive interface, and advanced control options including audio processing. This manual provides comprehensive instructions for the safe and effective use of your Flux device, covering setup, operation, maintenance, and troubleshooting.

מידע בטיחות

Always follow the instructions provided in this guide. Keep the device away from water and do not use it while bathing or showering. Do not use the device if you have a pacemaker or any other electronic medical device. Consult a healthcare professional before use if you have any health concerns or are pregnant. Clean the device and accessories after each use with mild soap and warm water, and store them properly to maintain hygiene and prevent damage.

הצהרות בנוגע לתוספי תזונה לא הוערכו על ידי ה-FDA ואינן נועדו לאבחן, לטפל, לרפא או למנוע כל מחלה או מצב בריאותי.

תוכן החבילה

אנא ודא שכל הפריטים הבאים נמצאים בחבילה שלך:

• ElectraStim Flux Unit
• תיק נשיאה מגן
• Electrode Pads (multiple pairs)
• Electrode Cables (2x)
• כבל טעינה USB
• Audio Line-In Cable
• מדריך התחלה מהירה (מסמך נפרד)

Figure 1: ElectraStim Flux complete package contents.

הגדרה

טעינת המכשיר

The Flux unit is powered by a high-capacity rechargeable lithium-ion battery. Before first use, or when the battery indicator shows low charge, connect the device to a USB power source using the provided USB charging cable.

• Locate the micro-USB port on the bottom of the Flux unit.
• Insert the small end of the USB cable into the Flux unit and the larger end into a USB wall adapter or computer USB port.
• The OLED display will show a battery charging indicator. The device charges to 80% in under an hour.
• A full charge provides up to 8 hours of play, depending on the selected mode and intensity.

Figure 2: Battery charging display on the Flux unit.

חיבור אביזרים

The Flux unit features twin outputs, allowing for a wide variety of accessory configurations. Ensure the device is turned off before connecting or disconnecting accessories.

• Connect the electrode cables to the two output ports located on the top edge of the Flux unit. These are labeled CH1 and CH2.
• Attach the electrode pads to the other end of the electrode cables.
• ודא שכל החיבורים מאובטחים לפני הפעלת המכשיר.

איור 3: למעלה view showing output ports for electrode cables.

Figure 4: Electrode cables for connecting to pads.

הוראות הפעלה

השליטה נגמרהview

The Flux unit features a clear OLED display and intuitive button controls:

איור 5: חזית view of the ElectraStim Flux with controls.

• כפתור הפעלה (⑂): לחץ והחזק כדי להפעיל או לכבות את המכשיר.
• לחצן מצב (M): Cycles through the available play modes.
• Channel 1 Intensity (+/-): מתאים את העוצמה עבור ערוץ 1.
• Channel 2 Intensity (+/-): מתאים את העוצמה עבור ערוץ 2.
• Cycle/Rotate Button (↻): Cycles through pre-programmed patterns within a selected mode or changes orientation in Tilt mode.

הפעלה/כיבוי

To turn on the Flux unit, press and hold the Power button (⑂) until the display illuminates. To turn off, press and hold the Power button again until the display shuts down.

התאמת עוצמה

The Flux offers 99 intensity levels for precise control. Use the Channel 1 (+/-) and Channel 2 (+/-) buttons to increase or decrease the stimulation intensity for each respective channel. The current intensity level will be displayed on the OLED screen.

Selecting Play Modes and Patterns

The Flux comes with 6 distinct play modes and over 40 pre-programmed wave/pulse patterns. Press the Mode (M) button to cycle through the main play modes. Once a mode is selected, use the Cycle/Rotate (↻) button to switch between the available patterns within that mode.

מצבי שמע

The Flux features advanced audio-processing controls, allowing external audio to influence the stimulation patterns. There are two primary audio modes:

• Stereo Line-In Mode: Connect an audio source (e.g., smartphone, MP3 player) to the 3.5mm audio jack on the bottom of the Flux unit using the provided audio line-in cable. The device will respond to the music or stereo-stim tracks, creating unique sensations.
• מצב מיקרופון: Utilize the built-in microphone to allow ambient noise, including voices or environmental sounds, to control the stimulation.

Figure 6: Flux unit displaying audio mode information.

תַחזוּקָה

ניקוי

To ensure hygiene and longevity of your device, clean the Flux unit and all accessories after each use. Use a soft cloth dampened with mild soap and warm water. Do not submerge the unit in water. Ensure the device is completely dry before storage or next use.

אִחסוּן

Store the ElectraStim Flux and its accessories in the provided protective carrying case when not in use. This protects the device from dust, moisture, and physical damage, ensuring its optimal performance over time.

Figure 7: Protective carrying case for the ElectraStim Flux.

פתרון בעיות

If you encounter any issues with your ElectraStim Flux, please refer to the table below for common problems and their solutions.

מפרטים

אחריות ותמיכה

For warranty information, technical support, or any inquiries not covered in this manual, please refer to the official ElectraStim webאתר או צרו קשר ישירות עם שירות הלקוחות שלהם. שמרו את הוכחת הרכישה שלכם לצורך תביעות אחריות.