מדריך הוראות למקדחת עמוד Scheppach DP16VLS

1. הקדמה

This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your Scheppach DP16VLS Pillar Drill. Please read these instructions carefully before using the machine to ensure proper function and to prevent injury or damage.

Image 1: Scheppach DP16VLS Pillar Drill with included vice.

2. הוראות בטיחות

Always observe general safety regulations when working with power tools. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

אזהרות בטיחות כלליות:

• בטיחות באזור העבודה: שמרו על אזור העבודה נקי ומואר היטב. אזורים עמוסים או חשוכים מזמינים תאונות. אין להפעיל כלי עבודה חשמליים בסביבה נפיצה, כגון בנוכחות נוזלים, גזים או אבק דליקים.
• בטיחות חשמל: תקעי כלי עבודה חשמליים חייבים להתאים לשקע. לעולם אל תשנו את התקע בשום צורה. הימנעו ממגע גוף עם משטחים מוארקים.
• בטיחות אישית: Always wear eye protection. Use hearing protection when operating the drill. Wear appropriate clothing; avoid loose clothing or jewelry that can get caught in moving parts. Secure long hair.
• שימוש וטיפול בכלים: אין להפעיל את כלי העבודה החשמלי בכוח. השתמש בכלי העבודה החשמלי המתאים ליישום שלך. נתקו את התקע ממקור החשמל לפני ביצוע כל כיוונון, החלפת אביזרים או אחסון כלי עבודה חשמליים.

Specific Pillar Drill Safety:

• Always secure the workpiece firmly to the drill table using the included vice or clamps. Never hold the workpiece by hand.
• Ensure the drill bit is correctly installed and tightened in the chuck before operation.
• Adjust the drilling depth stop to prevent drilling into the drill table.
• Keep hands clear of the rotating drill bit and all moving parts.
• Allow the motor to reach full speed before beginning to drill.
• Do not attempt to clear chips or debris while the drill is operating.

3. המוצר נגמרview ותכונות

The Scheppach DP16VLS is a robust pillar drill designed for precise drilling in various materials including wood, metal, aluminum, and plastic. It features a powerful 500W motor and a variable speed system.

תכונות עיקריות:

• מָנוֹעַ: Powerful 500 Watt motor.
• מְהִירוּת: 5 adjustable speeds ranging from 600 to 2650 revolutions per minute (rpm).
• צ'אק: Keyed chuck with a capacity of 1.5 to 13 mm.
• עומק קידוח: Maximum drilling stroke of 50 mm.
• שולחן עבודה: Robust steel structure, height-adjustable, and inclinable up to 45 degrees.
• סְגָן: Includes a vice with a maximum clamping capacity of 62 mm.
• לייזר: Integrated positioning laser for precise drilling point alignment.
• Outreach: 105 mm outreach from the column to the chuck center.

Image 2: Diagram illustrating ergonomic handle, precision laser, variable speed, and belt drive.

Image 3: Diagram illustrating adjustable drilling table, chuck capacity, heavy base, and 500W motor.

4. הרכבה

The Scheppach DP16VLS Pillar Drill is typically supplied partially disassembled. Follow these general steps for assembly. Refer to the detailed assembly diagrams in your product packaging for specific instructions.

1. הרכבת בסיס ועמוד: Secure the main column to the stable base using the provided fasteners. Ensure all connections are tight.
2. הרכבת שולחן: Attach the work table to the column, ensuring it can be adjusted vertically and rotated freely.
3. Drill Head Assembly: Mount the drill head assembly onto the top of the column. Connect any necessary electrical components as per the wiring diagram.
4. התקנת צ'אק: Install the drill chuck onto the spindle. Ensure it is seated correctly and securely.
5. Handle and Vice: Attach the feed handles and the included vice to the work table.
6. התקנת חגורה: If not pre-installed, install the drive belt between the motor and spindle pulleys. Adjust belt tension as needed (refer to Maintenance section).

Important: Before first use, verify all fasteners are securely tightened and all components are correctly aligned.

5. הוראות הפעלה

5.1 Preparing for Drilling

• בחר מקדח: Choose the appropriate drill bit for the material and hole size. Insert it into the chuck and tighten securely with the chuck key.
• התאם מהירות: Open the belt cover and adjust the belt position on the pulleys to select the desired speed. Higher speeds are generally for smaller bits and softer materials, while lower speeds are for larger bits and harder materials. Close the belt cover before operation.
• Adjust Work Table: Loosen the table lock and adjust the work table height and angle as required for your workpiece. Re-tighten the lock securely. The table can be tilted from +45° to -45°.
• חומר עבודה מאובטח: Place the workpiece on the table and secure it firmly using the included vice or clamps. Ensure it cannot shift during drilling.
• Set Drilling Depth: Use the depth stop mechanism to set the desired drilling depth. This prevents drilling too deep.
• Activate Laser: Turn on the integrated laser guide to precisely align the drilling point.

Image 4: User drilling into a wooden beam, demonstrating proper workpiece securing.

Image 5: User drilling into a metal workpiece secured by the included vice.

Image 6: Close-up of the depth scale and laser guide for precise control.

5.2 נוהל קידוח

1. הקפד על מילוי כל אמצעי הבטיחות.
2. Turn on the drill using the power switch. Allow the motor to reach its operating speed.
3. הורידו את המקדח באיטיות לתוך חומר העבודה באמצעות ידיות ההזנה. הפעילו לחץ יציב ואחיד.
4. Do not force the drill. If the motor slows significantly, reduce feed pressure.
5. Periodically retract the drill bit to clear chips, especially when drilling deep holes in metal.
6. Once the desired depth is reached, retract the drill bit completely from the workpiece.
7. Turn off the drill and wait for the chuck and drill bit to stop rotating before removing the workpiece or making adjustments.

6. תחזוקה

תחזוקה שוטפת מבטיחה את אורך החיים ואת פעולתה הבטוחה של מקדחת העמוד שלכם.

• ניקוי: After each use, clean the machine of dust, chips, and debris. Use a brush or compressed air. Do not use solvents that may damage plastic parts.
• סִיכָה: Periodically lubricate moving parts such as the column, spindle, and feed mechanism with light machine oil.
• מתח חגורה: Check the drive belt tension regularly. A properly tensioned belt should have slight give when pressed. Adjust if too loose or too tight to prevent slippage or excessive wear.
• תחזוקת צ'אק: Keep the chuck jaws clean and free of debris. Lubricate the chuck mechanism occasionally.
• בדיקת חשמל: Regularly inspect the power cord and plug for damage. If damaged, have it replaced by a qualified technician.

7. פתרון תקלות

This section addresses common issues you might encounter with your Scheppach DP16VLS Pillar Drill.

8. מפרטים

Technical data for the Scheppach DP16VLS Pillar Drill.

• מספר דגם: DP16VLS
• יַצרָן: שפך
• קוד מאמר: SCH5906810901
• מידות המוצר: 43.5 x 22 x 60 ס"מ
• משקל פריט: 14 ק"ג
• חוֹמֶר: פְּלָדָה
• צֶבַע: כְּחוֹל
• סִיוּם: גימור מבריק
• מקור כוח: חשמלי עם כבלים
• כרך ידtage: 230 וולט
• מהtage: 500 וואט
• Ampעידן: 16 Ampלפני
• קיבולת צ'אק: 1.5 - 13 מ"מ
• Max Drilling Depth: 50 מ"מ
• מהירויות: 5 (600-2650 סל"ד)
• מהירות סיבוב מקסימלית: 2650 סל"ד
• רמת קול: 84 דציבלים
• אורך כבל: 2000 מ"מ
• Max Distance Chuck to Table: 170 מ"מ
• Max Distance Chuck to Base: 250 מ"מ
• הטיית שולחן: -45° עד +45°
• רכיבים כלולים: Pillar Drill, Vice

Image 7: Diagram illustrating the 50 mm drilling depth capacity.

Image 8: Diagram showing suitable materials for drilling: wood, steel, metal, aluminum, plastic.

Image 9: Close-up of drill head showing 105 mm outreach from column to chuck center.

9. אחריות ותמיכה

For warranty information, please refer to the documentation included with your purchase or contact Scheppach customer service directly. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or visit the official Scheppach webהאתר לפרטי יצירת קשר.