Notifier FSP-951 Intelligent Addressable Photo Detector

1. הקדמה

The Notifier FSP-951 is an intelligent addressable photoelectric smoke detector designed for use with Notifier's FlashScan protocol. This device provides advanced detection capabilities for fire alarm systems, offering reliable smoke sensing and communication with the control panel. Its photoelectric sensing chamber is optimized to detect a wide range of combustion products, making it suitable for various applications. This manual provides essential information for the proper installation, operation, and maintenance of the FSP-951 detector.

2. מידע בטיחות

Always adhere to local codes and regulations, as well as NFPA 72 (National Fire Alarm and Signaling Code) requirements, when installing and maintaining fire alarm devices. Disconnect power to the control panel before installing, removing, or servicing the detector. This device operates on a low-voltage circuit; however, improper wiring can damage the detector or the control panel. Refer to the control panel's documentation for specific wiring diagrams and compatibility information. Do not paint the detector, as this can interfere with its operation.

3. רכיבים נגמרוview

The FSP-951 detector consists of a detector head and a compatible mounting base (sold separately). The detector head contains the photoelectric sensing chamber, processing electronics, and communication circuitry. The mounting base provides the electrical connections to the fire alarm circuit and allows for easy installation and removal of the detector head.

איור 3.1: חזית view of the Notifier FSP-951 Intelligent Addressable Photo Detector. This image shows the white, circular detector head with its central sensing area.

איור 3.2: אחורי view of the Notifier FSP-951 detector head. This view displays the electrical contacts, model number (FSP-951), and manufacturing details, including the country of origin (Mexico) and a warning about connecting to a compatible fire alarm control panel.

Figure 3.3: An orange protective cap, typically used to cover the detector during construction or dusty conditions to prevent contamination of the sensing chamber.

4. התקנה והתקנה

Installation of the FSP-951 detector requires a compatible Notifier mounting base (e.g., B501, B224RB, B224BI, B200S, B200SR). Ensure the mounting location complies with all applicable codes and provides optimal smoke detection coverage.

4.1 Mounting the Base

1. Secure the detector mounting base to a standard electrical box or directly to the ceiling using appropriate fasteners.
2. Ensure the base is firmly attached and level.

4.2 חיווט

Wire the mounting base according to the specific wiring diagram provided in the control panel's installation manual and the detector base's instructions. The FSP-951 uses two-wire addressable communication. Ensure correct polarity and secure all wire connections.

4.3 התקנת ראש הגלאי

1. יש ליישר את ראש הגלאי עם בסיס ההרכבה.
2. Rotate the detector clockwise until it drops into place and locks securely. A slight click may be heard.
3. Verify that the detector is firmly seated and cannot be easily removed without using the removal tool or by twisting counter-clockwise.

Figure 4.1: Product label for the Notifier FSP-951, showing the model number, color (WHITE), and UPC (734038305157). This label is typically found on the product packaging.

5. הוראות הפעלה

Once properly installed and powered, the FSP-951 detector continuously monitors the air for the presence of smoke. It communicates its status to the fire alarm control panel using the FlashScan protocol.

5.1 מחווני LED

• פעולה רגילה: The detector's LED will flash periodically (e.g., every few seconds) to indicate normal communication with the control panel.
• מצב אזעקה: If smoke is detected, the LED will illuminate steadily (or flash rapidly, depending on panel programming) and the detector will send an alarm signal to the control panel.
• מצב תקלה: A specific flash pattern or no illumination may indicate a trouble condition (e.g., dirty chamber, internal fault). Refer to the control panel's display for detailed trouble messages.

5.2 בדיקת הגלאי

Regular testing of the smoke detector is crucial to ensure its proper operation. Consult NFPA 72 for recommended testing frequencies.

• מבחן פונקציונלי: Use an approved aerosol smoke stimulant to test the detector. Apply the stimulant to the detector's sensing chamber until an alarm is initiated.
• בדיקת מגנט: Some bases allow for a magnet test. Refer to the base's documentation for details.
• After testing, ensure the detector resets and returns to normal supervisory mode.

6. תחזוקה

Proper maintenance ensures the longevity and reliable operation of your FSP-951 detector.

6.1 ניקוי

Dust and debris can accumulate in the sensing chamber, leading to false alarms or reduced sensitivity. Clean the detector annually or as needed.

1. Disconnect power to the fire alarm control panel.
2. Gently twist the detector head counter-clockwise to remove it from the mounting base.
3. Use a vacuum cleaner with a soft brush attachment to remove dust from the exterior and the sensing chamber openings.
4. Do not use cleaning solvents or liquids on the detector.
5. התקן מחדש את ראש הגלאי על ידי יישורו עם הבסיס וסיבובו עם כיוון השעון עד שיינעל.
6. Restore power to the control panel and verify normal operation.

6.2 החלפה

Smoke detectors have a limited lifespan. Consult the manufacturer's recommendations and local codes for the recommended replacement interval, typically 10 years from the date of manufacture.

7. פתרון תקלות

This section addresses common issues you might encounter with the FSP-951 detector.

For persistent issues, consult a qualified fire alarm technician or contact Notifier technical support.

8. מפרטים

9. אחריות ותמיכה

For specific warranty information, please refer to the documentation provided with your purchase or contact Notifier directly. Notifier products are typically covered by a limited warranty against defects in materials and workmanship.

For technical support, product inquiries, or service, please contact your authorized Notifier distributor or visit the official Notifier website. You can also find general product information on the Notifier brand page on Amazon.