AMP מדריך הוראות מחקר PowerStep

1. נגמרview

ה AMP Research PowerStep is an automatic, electric-powered running board system designed to provide convenient vehicle access. It extends instantly when the vehicle door is opened and retracts out of sight when the door closes, enhancing ground clearance, aerodynamics, and overall vehicle appearance. The system is constructed with die-cast aluminum alloy components and precision stainless steel pivot pins for stability and durability.

תכונות עיקריות:

• פריסה אוטומטית: Steps automatically extend when doors open and retract when doors close.
• בנייה חזקה: Engineered with 6-inch wide, cab-length step boards capable of supporting a 600 lb. load, featuring heavy-duty stainless steel pivot pins.
• בטיחות משופרת: Features a textured, slip-resistant stepping surface for optimal traction in various weather conditions. Includes onboard LED lighting and 'Anti-Pinch' technology to prevent obstruction.
• חומרים עמידים: Made in the USA with global materials, utilizing corrosion-resistant aluminum.

איור 1: AMP Research PowerStep system components.

2. Parts List (What's in the Box)

לפני תחילת ההתקנה, יש לוודא שכל הרכיבים קיימים:

• Boards (2)
• Hardware (various bolts, nuts, washers)
• רתמת חיווט
• Installation Instructions (refer to manufacturer's official guide for detailed steps)

3. התקנה והתקנה

התקנה של AMP Research PowerStep is designed to be vehicle-specific and includes all necessary hardware. For detailed, step-by-step instructions, always refer to the official installation guide provided with your product. The general process involves:

1. הֲכָנָה: Ensure the vehicle is on a level surface and safely supported. Gather all necessary tools.
2. סוגרי הרכבה: Attach the motor and linkage assemblies to the vehicle's frame using the provided hardware.
3. תִיוּל: Route the wiring harness from the motors to the vehicle's power source and interior control module. This typically involves connecting to the battery and door trigger wires.
4. חיבור לוח מדרגה: Secure the PowerStep boards to the linkage assemblies.
5. התאמות סופיות: Test the steps for proper deployment and retraction. Ensure all connections are secure and wiring is neatly routed and protected.

Installation Resources:

For visual guidance, the following seller-provided videos demonstrate installation processes for similar running boards on Jeep Wrangler JL models:

4. הוראות הפעלה

ה AMP Research PowerStep operates automatically based on your vehicle's door activity:

• פְּרִיסָה: When a vehicle door is opened, the PowerStep will automatically extend to a comfortable stepping height.
• הִתכַּחֲשׁוּת: After a slight delay once the vehicle doors are closed, the PowerStep will retract and tuck tightly under the cab.
• תאורת LED: Integrated LED lights illuminate the step and the ground below when the steps are deployed, enhancing visibility in low-light conditions.
• טכנולוגיה נגד צביטה: The system is equipped with 'Anti-Pinch' technology, which is designed to stop the step from operating if an obstruction is detected during deployment or retraction, preventing injury or damage.

Figure 2: PowerStep deployed for easy vehicle access.

5. תחזוקה

כדי להבטיח את אורך החיים והביצועים האופטימליים שלך AMP מחקר על PowerStep, מומלץ לבצע תחזוקה שוטפת:

• ניקוי: Periodically clean the step surfaces and linkage mechanisms to remove dirt, mud, and debris. Use mild soap and water, avoiding harsh chemicals that could damage the finish.
• סִיכָה: Inspect the pivot points and moving parts for smooth operation. Lubricate as recommended in the official product manual to prevent stiffness or wear.
• בְּדִיקָה: Regularly check all mounting hardware and electrical connections for tightness and signs of wear or corrosion. Tighten any loose fasteners.

6. פתרון תקלות

If you encounter issues with your PowerStep, consider the following common troubleshooting steps:

• שלבים שאינם נפתחים/משוכים: Check for any obstructions that might be triggering the 'Anti-Pinch' safety feature. Inspect electrical connections for looseness or corrosion. Ensure the vehicle battery has sufficient charge.
• Uneven Operation: Verify that all mounting hardware is securely tightened. Check for any debris or damage to the linkage mechanisms.
• נורות LED לא עובדות: Inspect the wiring to the LED lights for damage or loose connections.

If problems persist, consult the comprehensive troubleshooting section in your official AMP Research PowerStep installation guide or contact customer support.

7. מפרטים

8. אחריות ותמיכה

אַחֲרָיוּת:

AMP Research provides a hassle-free, comprehensive 5-year/60,000-mile warranty for the PowerStep. Please refer to the official warranty documentation included with your product for full terms and conditions.

תמיכת לקוחות:

לסיוע נוסף, תמיכה טכנית או תביעות אחריות, אנא צרו קשר AMP Research customer service directly. Contact information can typically be found in your product packaging or on the official AMP מֶחקָר webאֲתַר.