Notifier NCM-F Network Control Module (Multi Mode Fiber) User Manual

1. הקדמה

The Notifier NCM-F is a Network Control Module specifically designed for multi-mode fiber optic communication within a Notifier fire alarm network system. This module facilitates reliable data exchange between various network nodes, including but not limited to CPU-640/3030, NCA, CPU2-640/3030, NCA-2, and DVC units. For proper network functionality, one NCM-F module is required for each network node that utilizes multi-mode fiber connectivity.

2. התקנה והתקנה

Proper installation of the NCM-F module is crucial for system integrity and performance. Follow these steps carefully.

2.1 אמצעי זהירות

• ניתוק חשמל: Always ensure that power to the host fire alarm control panel or network node is completely disconnected before attempting any installation or removal of the NCM-F module.
• הגנה מפני פריקה אלקטרוסטטית (ESD): The NCM-F is a static-sensitive device. Wear an anti-static wrist strap and work on an approved anti-static mat to prevent damage from electrostatic discharge. Avoid touching the circuit board components directly.

2.2 פירוק המודול

Carefully remove the NCM-F module from its anti-static packaging. Retain the packaging for future storage or transport.

תמונה 1: Notifier NCM-F module sealed in its anti-static bag, showing the front side with a static-sensitive device warning label.

תמונה 2: Notifier NCM-F module sealed in its anti-static bag, showing the rear side with a static-sensitive device warning label and product identification sticker.

2.3 התקנה פיזית

1. הכנסת מודול: Gently align the NCM-F module with the designated slot on the compatible Notifier network node (e.g., CPU-640/3030, NCA). Apply even pressure to firmly seat the module into its connector.
2. Securing the Module: If applicable, use any provided screws or fasteners to secure the NCM-F module within the host network node chassis.

2.4 Fiber Optic Connection

1. הכנת כבלים: Ensure that the multi-mode fiber optic cables are clean and free of dust or debris. Use appropriate fiber cleaning tools if necessary.
2. חיבור כבלים: Connect the multi-mode fiber optic cables to the corresponding transmit (TX) and receive (RX) ports on the NCM-F module. It is critical to ensure correct polarity: the transmit port of one device must connect to the receive port of the other, and vice-versa.

2.5 Power-Up and Verification

After all physical connections are made, restore power to the host network node. Observe the system indicators on the host panel to confirm proper module recognition and network communication status. Refer to the host panel's manual for specific diagnostic procedures.

3. הוראות הפעלה

The Notifier NCM-F module functions as a dedicated communication interface. Its operation is largely passive, facilitating the network communication for the host panel. User interaction primarily occurs through the host fire alarm control panel or network device.

3.1 תקשורת רשת

Once properly installed and configured within the host network node, the NCM-F transparently manages data transmission and reception over the multi-mode fiber optic link. It converts electrical signals from the host panel into optical signals for transmission and vice-versa for reception.

3.2 מחווני מצב

The NCM-F module itself typically does not have user-facing indicators. Network status and module health are usually reported by the host network node. Refer to the host network node's manual for specific LED indicators, display messages, or diagnostic menus related to network communication status. These indicators will confirm the proper operation of the NCM-F and the fiber optic link.

4. תחזוקה

Regular maintenance helps ensure the longevity and reliable operation of the NCM-F module and the overall network.

4.1 Cleaning Fiber Optic Connections

Periodically inspect and clean fiber optic connectors using only approved fiber optic cleaning tools and procedures. Dust, dirt, and other contaminants can significantly degrade signal quality and lead to communication errors. Never use abrasive materials or solvents not specifically designed for fiber optic cleaning.

4.2 תנאים סביבתיים

Ensure that the operating environment for the host network node and the NCM-F module remains within the specified temperature and humidity ranges. Extreme conditions can lead to premature module degradation or malfunction.

4.3 עדכוני קושחה

Any necessary firmware updates for the NCM-F module would typically be performed through the host network node. Always refer to the host panel's documentation for specific firmware update procedures and compatibility information.

5. פתרון תקלות

If you experience issues with network communication, follow these troubleshooting steps.

5.1 No Network Communication

• מקומות ישיבה במודול: Verify that the NCM-F module is correctly and firmly seated in its designated slot on the host network node.
• חיבורי סיבים אופטיים: Check all fiber optic cable connections for proper seating and correct polarity (TX to RX, RX to TX).
• שלמות כבל: Inspect fiber optic cables for any visible damage such as kinks, sharp bends, or breaks. Damaged cables must be replaced.
• Host Node Status: Ensure the host network node is powered on and functioning correctly according to its own diagnostic indicators.
• זיהוי מודול: Access the diagnostic menus of the host panel to confirm that the NCM-F module is recognized by the system.

5.2 Intermittent Communication

• ניקיון מחברים: Clean fiber optic connectors on both the NCM-F and the connected device.
• חיבורים רופפים: Check for any loose fiber optic cable connections that might be causing intermittent signal loss.
• Environmental Stability: Verify that environmental conditions (temperature, humidity) are stable and within the module's specified operating range.

5.3 Module Not Recognized

• מחזור הפעלה: Perform a controlled power cycle of the host network node.
• החזר את המודול למקומו: Carefully re-seat the NCM-F module in its slot, ensuring proper alignment and connection.
• תמיכה טכנית: If issues persist after performing these steps, contact Notifier technical support or your authorized Notifier distributor for further assistance.

6. מפרטים

7. אחריות ותמיכה

7.1 אחריות למוצר

For detailed information regarding the warranty coverage for your Notifier NCM-F Network Control Module, please refer to the official warranty statement provided with your original purchase. You may also contact Notifier directly or consult their official webבאתר לקבלת תנאי האחריות העדכניים ביותר.

7.2 תמיכה טכנית

Should you require technical assistance, installation guidance, or encounter issues that cannot be resolved using the troubleshooting steps provided in this manual, please contact Notifier customer support. You can typically find contact information on the Notifier official website or through your authorized Notifier distributor.