1. הקדמה
This manual provides detailed instructions for the safe and effective operation of your Sealey BT2014 Digital Battery and Alternator Tester with Printer. This device is designed for diagnosing battery and alternator faults, offering the convenience of printing test results directly. It is capable of testing battery condition with as little as 1.5V residual charge and analyzing the vehicle's charging system both at rest and under load.
אנא קרא מדריך זה ביסודיות לפני השימוש ושמור אותו לעיון עתידי.
2. מידע בטיחות
Always observe the following safety precautions to prevent personal injury and damage to the tester or vehicle.
- Wear appropriate eye protection and protective clothing when working near vehicle batteries.
- Ensure the vehicle is in a well-ventilated area to disperse any battery gases.
- הרחק ניצוצות, להבות וחומרי עישון מהסוללה.
- Avoid touching battery terminals or cables with bare hands.
- אין להפעיל את הבוחן אם הוא נראה פגום.
- Ensure correct polarity when connecting the tester to the battery (red clamp לחיוב, שחור clamp לשלילה).
- Keep the tester dry and clean.
3. תכולת החבילה
Upon opening your Sealey BT2014 package, please verify that all components are present and undamaged:
- Sealey BT2014 Digital Battery and Alternator Tester with integrated printer.
- Heavy-duty carry-case.
- Batteries (pre-installed or included for printer operation).
- Two rolls of printing paper.
- מדריך הוראות (מסמך זה).
איור 3.1: The Sealey BT2014 Digital Battery and Alternator Tester shown within its protective carry case, with all accessories visible.
4. המוצר נגמרview
The Sealey BT2014 is a robust diagnostic tool designed for automotive electrical system analysis. It features a clear digital display, intuitive controls, and an integrated thermal printer for immediate result documentation.
איור 4.1: חֲזִית view of the Sealey BT2014 tester, displaying the screen, control buttons, and attached battery clamps.
4.1. רכיבים
- תצוגה דיגיטלית: מציג תוצאות בדיקה ואפשרויות תפריט.
- לחצני שליטה: 'Forward', 'Back', 'Enter', 'Start/Stop' for navigation and operation.
- מדפסת משולבת: For printing test reports.
- סוללה Clamps: אדום לחיובי (+), שחור לשלילי (-).
- Printer Paper Compartment: Located under the clear cover.
איור 4.2: א מפורט view of the Sealey BT2014 tester, highlighting the digital display and a printed test report emerging from the integrated printer.
5. התקנה
5.1. Loading Printer Paper
- Gently open the clear cover of the printer compartment.
- Insert a new roll of thermal paper, ensuring the paper feeds from the bottom of the roll.
- Pull a small length of paper out and close the cover, ensuring the paper exits through the slot.
5.2. Connecting to the Vehicle Battery
- Ensure the vehicle ignition is off and all accessories are disconnected.
- חבר את אָדוֹם חיובי (+) clamp למסוף הסוללה החיובי.
- חבר את שָׁחוֹר קלוריות שליליות (-)amp למסוף הסוללה השלילי.
- Ensure connections are secure and free from corrosion. The tester will power on automatically.
6. הוראות הפעלה
The BT2014 offers various testing modes accessible via the main menu.
6.1. מבחן סוללה
This function assesses the health and charge level of the vehicle's battery.
- From the main menu, select 'Battery Test' using the 'Forward'/'Back' buttons and press 'Enter'.
- Follow the on-screen prompts to input battery type (e.g., Flooded, AGM, Gel) and Cold Cranking Amps (CCA) rating. This information is usually found on the battery label.
- The tester will perform the analysis. Once complete, the results will be displayed, showing voltage, CCA, state of health, and state of charge.
- You will be prompted to 'Print Result?'. Select 'Yes' or 'No' and press 'Enter'.
איור 6.1: The Sealey BT2014 tester actively performing a test on a vehicle battery, with the display showing a prompt to print results.
6.2. Alternator Test (Charging System Test)
This function evaluates the vehicle's charging system, including the alternator's performance.
- From the main menu, select 'Alternator Test' and press 'Enter'.
- The tester will guide you through a series of steps, which typically include:
- Starting the vehicle engine.
- Running the engine at idle.
- Increasing engine RPM to a specified level (e.g., 2000 RPM).
- Turning on electrical loads (e.g., headlights, fan).
- The tester will analyze the voltage output under various conditions.
- Results will be displayed, indicating the alternator's condition (e.g., 'Good', 'Low Output', 'High Output').
- You will be prompted to 'Print Result?'. Select 'Yes' or 'No' and press 'Enter'.
7. תחזוקה
7.1. ניקיון
נגבו את הבוחן בעזרת מטלית רכהamp cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.
7.2. Printer Paper Replacement
When the printer runs out of paper, follow the steps in Section 5.1 to replace the roll. Use only thermal paper compatible with the BT2014.
7.3. אחסון
Store the tester in its protective carry-case in a dry, cool environment, away from direct sunlight and extreme temperatures. Disconnect the battery clamps before storage.
איור 7.1: The Sealey BT2014 tester securely stored within its closed, protective carry case, ready for transport or long-term storage.
8. פתרון תקלות
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| הבוחן לא נדלק. | Poor battery connection; Vehicle battery completely dead. | בדוק את clamp connections; Ensure battery has at least 1.5V residual charge. |
| המדפסת לא מדפיסה. | No paper; Paper inserted incorrectly; Printer malfunction. | Replace paper roll; Re-insert paper correctly; Contact support if issue persists. |
| תוצאות בדיקה לא מדויקות. | Incorrect battery type/CCA input; Poor clamp connection; Corroded terminals. | Verify battery information; Clean battery terminals and ensure secure connections. |
9. מפרטים
| תכונה | מִפרָט |
|---|---|
| מספר דגם | BT2014 |
| מותג | סילי |
| סוג מדידה | מודד |
| מידות המוצר (L x W x H) | 17 x 82 x 17 מילימטרים |
| משקל פריט | 1566 גרם |
| מקור כוח | AC (for charging/powering, specific details not provided) |
| סוללה מינימלית כרךtage for Test | 1.5V residual charge |
10. אחריות ותמיכה
The Sealey BT2014 Digital Battery and Alternator Tester is covered by a 1 שנות אחריות from the date of purchase. This guarantee covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. Terms and conditions apply.
איור 10.1: Official Sealey 1 Year Guarantee emblem, indicating product warranty coverage.
For technical support, warranty inquiries, or to order replacement parts (such as printer paper rolls), please contact your authorized Sealey dealer or visit the official Sealey webאתר ליצירת קשר.
