1. הקדמה
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Clear-Com BS210 Base Station. Please read this manual thoroughly before using the device to ensure optimal performance and safety. Keep this manual for future reference.
2. המוצר נגמרview
The Clear-Com BS210 is a 2-channel, 2.4GHz wireless intercom base station designed for professional communication environments. It facilitates seamless communication by supporting up to 4 full-duplex or 11 half-duplex beltpacks or all-in-one headsets, making it suitable for various production and event applications.
תכונות עיקריות:
- 2-channel wireless communication
- Operates on the 2.4GHz frequency band
- Supports up to 4 full-duplex beltpacks/headsets
- Supports up to 11 half-duplex beltpacks/headsets
- Robust and reliable performance for professional use
This image displays the front panel of the Clear-Com BS210 Base Station. It features two antennas, a power switch, various control buttons and knobs for channel selection, volume, and auxiliary input/output, and a headset jack. The unit is designed for rack mounting.
3. התקנה
3.1 פירוק
- Carefully remove the BS210 Base Station from its packaging.
- Verify that all components are present and undamaged. Report any discrepancies to your supplier immediately.
- שמור את האריזה להובלה או אחסון עתידיים.
3.2 חיבור מתח
Connect the provided power cable to the power input on the rear panel of the BS210 Base Station and then to a suitable AC power outlet. Ensure the power switch on the front panel is in the 'OFF' position before connecting to power.
3.3 התקנת אנטנה
Screw the two included antennas securely into the antenna connectors located on the rear panel of the base station. Position the antennas vertically for optimal signal reception and transmission.
3.4 Connecting Beltpacks/Headsets
Refer to the individual instruction manuals for your Clear-Com beltpacks or all-in-one headsets for pairing and connection procedures with the BS210 Base Station. Ensure the base station is powered on and in pairing mode if required by your specific beltpack model.
4. הוראות הפעלה
4.1 הפעלה/כיבוי
To power on the BS210 Base Station, press the 'POWER' switch located on the front panel to the 'ON' position. The power indicator light will illuminate. To power off, press the switch to the 'OFF' position.
4.2 בחירת ערוצים
The BS210 supports two communication channels. Use the dedicated channel selection buttons or switches on the front panel to select the desired channel for communication. Ensure connected beltpacks are also set to the corresponding channel.
4.3 בקרת עוצמת הקול
Adjust the master volume for the base station using the 'VOLUME' knob on the front panel. Individual volume controls on connected beltpacks or headsets should be adjusted for personal preference.
4.4 Communication Modes (Full/Half-Duplex)
The BS210 supports both full-duplex (simultaneous talk and listen) and half-duplex (push-to-talk) communication, depending on the connected beltpack configuration and system settings. Consult your beltpack manual for specific mode operations.
5. תחזוקה
5.1 ניקוי
To clean the BS210 Base Station, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with a mild, non-abrasive cleaner can be used. Ensure the unit is powered off and disconnected from the power source before cleaning. Avoid using harsh chemicals or solvents.
5.2 אחסון
When not in use for extended periods, store the base station in a cool, dry environment, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage to protect the unit from dust and physical damage.
6. פתרון תקלות
| לְהַנפִּיק | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| אין כוח | Power cable disconnected; power switch off; power outlet fault | Check power cable connection; ensure power switch is ON; test power outlet |
| No audio from beltpacks | Incorrect channel selection; low volume; beltpack not paired | Verify channel settings; adjust base station and beltpack volume; re-pair beltpack |
| Poor audio quality/intermittent signal | Antennas improperly positioned; interference; excessive distance | Ensure antennas are vertical and secure; reduce sources of interference; decrease distance between base station and beltpacks |
| Cannot connect more beltpacks | Maximum capacity reached | The BS210 supports a maximum of 4 full-duplex or 11 half-duplex beltpacks. Ensure you are within these limits. |
7. מפרטים
- יַצרָן: נקה- Com
- דֶגֶם: BS210
- ASIN: B0747WLSBP
- משקל פריט: 17 פאונד
- תאריך זמין ראשון: 25 ביולי 2017
- ערוצים: 2
- רצועת תדרים: 2.4GHz
- Supported Beltpacks/Headsets: Up to 4 full-duplex or 11 half-duplex
8. אחריות ותמיכה
For warranty information and technical support, please refer to the official Clear-Com website or contact your authorized Clear-Com dealer. Keep your purchase receipt as proof of purchase for any warranty claims. Specific warranty terms and conditions may vary by region.
