Garmin GT21-TH Transducer Instruction Manual

1. הקדמה

The Garmin GT21-TH is a thru-hull mount transducer designed for coastal and offshore fishing. It provides both traditional sonar and CHIRP ClearVü scanning sonar capabilities. This transducer is engineered to deliver clear and crisp fish arches with superior target separation, along with detailed definition of underwater structures directly below your boat.

This manual provides essential information for the proper installation, operation, and maintenance of your GT21-TH transducer to ensure optimal performance and longevity.

2. מה בקופסה

ודא שכל הרכיבים קיימים לפני תחילת ההתקנה.

• Garmin GT21-TH Transducer (8-pin) with stainless steel stem
• בלוק ירידות
• Isolation plate and bushings
• חומרת הרכבה
• הוראות התקנה (מסמך זה)

Image 1: Garmin GT21-TH Transducer and its primary components. This image shows the main transducer unit, which is an 8-pin device with a stainless steel stem, alongside the fairing block, isolation plate, bushings, and various mounting hardware pieces. These are the items typically found in the product packaging.

3. התקנה והתקנה

Proper installation is critical for the performance of your GT21-TH transducer. It is recommended that installation be performed by a qualified marine technician. Always follow all safety precautions and wear appropriate personal protective equipment.

3.1 שיקולים חשובים

• Hull Deadrise: This transducer is designed for hull deadrises less than 25 degrees. Installing on a hull with a greater deadrise may result in reduced performance.
• מִקוּם: Select a location on the hull that is free from turbulence, air bubbles, and obstructions. The transducer should be mounted in an area with minimal water flow disturbance for optimal sonar returns.
• ניתוב כבלים: Ensure the transducer cable can be routed to your sonar unit without sharp bends, kinks, or interference from other electrical systems.

3.2 שלבי התקנה (מעלview)

1. הכן את מיקום ההרכבה: Mark and drill the necessary holes in the hull according to the provided template (if applicable) and instructions. Ensure the hole size is appropriate for the transducer stem.
2. החל איטום: Apply marine-grade sealant around the drilled holes and the transducer stem to ensure a watertight seal.
3. הכנס מתמר: Carefully insert the transducer stem through the hull from the outside.
4. Install Fairing Block and Hardware: From inside the hull, install the isolation plate, bushings, fairing block, and mounting hardware. Tighten fasteners securely but do not overtighten. The fairing block helps orient the transducer for optimal water flow and performance.
5. כבל מסלול: Route the transducer cable to your compatible Garmin sonar unit. Secure the cable to prevent damage or entanglement.
6. Connect to Sonar Unit: Connect the 8-pin connector to the appropriate port on your Garmin sonar device.
7. התקנה בדיקה: After installation, perform a water test to check for leaks and verify proper sonar operation. Refer to your sonar unit's manual for testing procedures.

אַזהָרָה: Failure to properly seal the transducer installation can lead to water intrusion and damage to your vessel. Always consult the detailed installation instructions included with the product for specific drilling templates and torque specifications.

4. הוראות הפעלה

The GT21-TH transducer works in conjunction with a compatible Garmin sonar unit. Refer to your sonar unit's owner's manual for detailed instructions on operating sonar functions and adjusting settings.

4.1 Sonar Frequencies and Capabilities

• סונאר מסורתי: Operates at 50/200 kHz with a power rating of 600 W. This provides classic fish arches and general depth information.
• CHIRP ClearVü Sonar: Operates at 260/455 kHz with a power rating of 500 W. This scanning sonar provides photographic-like images of fish and structure below your boat.

4.2 Basic Operation Tips

• בחר סונאר View: On your Garmin display, select the desired sonar view (e.g., Traditional, ClearVü, Split Screen).
• Adjust Gain/Sensitivity: Start with automatic gain settings and adjust manually if needed to enhance target returns or reduce clutter.
• טווח עומק: Set the depth range appropriate for the water depth you are fishing in.
• מהירות גלילה: Adjust scroll speed to match your boat's speed for accurate representation of the bottom and targets.
• חיישן טמפרטורה: The built-in fast-response temperature sensor will display water temperature on your compatible sonar unit.

5. תחזוקה

תחזוקה שוטפת מבטיחה את אורך החיים והביצועים האופטימליים של המתמר שלך.

• ניקוי: Periodically clean the transducer face with mild soap and water to remove marine growth, dirt, or oil. Avoid abrasive cleaners or solvents that could damage the transducer material.
• בְּדִיקָה: Regularly inspect the transducer cable for cuts, abrasions, or kinks. Check the mounting hardware for tightness and corrosion.
• ציפוי נגד עכירות: If your boat is kept in water, apply a water-based antifouling paint to the transducer face to prevent marine growth. Do not use solvent-based paints, as they can damage the transducer.

6. פתרון תקלות

If you experience issues with your GT21-TH transducer, consider the following common troubleshooting steps.

• No Sonar Reading or Weak Returns:
  • בדוק את כל חיבורי הכבלים בין המתמר ליחידת הסונאר. ודא שהם מאובטחים וחופשיים מקורוזיה.
  • Inspect the transducer face for marine growth, dirt, or damage. Clean if necessary.
  • Verify the transducer is properly submerged and not experiencing air bubbles from hull turbulence.
  • Adjust gain/sensitivity settings on your sonar unit.
  • Ensure the correct transducer type is selected in your sonar unit's settings.
• קריאות עומק לא מדויקות:
  • בדוק אם יש חסימות ליד המתמר שעלולות להפריע לאות הסונאר.
  • Ensure the transducer is mounted correctly and not angled improperly.
  • Calibrate depth offset on your sonar unit if available.
• Interference/Noise on Screen:
  • Ensure the transducer cable is routed away from other electrical wiring, especially engine wiring or VHF cables.
  • Check for loose electrical connections on other marine electronics.
  • Try adjusting noise rejection settings on your sonar unit.

For further assistance, refer to your Garmin sonar unit's manual or contact Garmin customer support.

7. מפרטים

8. אחריות ותמיכה

For information regarding the warranty of your Garmin GT21-TH transducer, please refer to the warranty card included with your product or visit the official Garmin website. Garmin provides a limited warranty against defects in materials and workmanship.

For technical support, product registration, or to find authorized service centers, please visit garmin.com/support.