מדריך למשתמש של גלאי מתכות גארט ACE 400i

1. הקדמה

The Garrett ACE 400i is an advanced metal detector designed for hobbyists and enthusiasts. It builds upon the success of previous ACE models, offering enhanced features for improved target identification and detection depth. This manual provides comprehensive instructions for assembling, operating, and maintaining your ACE 400i to ensure optimal performance and longevity.

תכונות מפתח כוללות:

• Target Conductivity Indication: A numerical display (1-100) helps identify the probable nature of the target.
• ברזל אודיו: Allows users to hear discriminated ferrous targets, aiding in distinguishing valuable items from trash.
• Increased Frequency (10 kHz): Provides enhanced detection depth and sensitivity to smaller targets.
• התאמת תדירות: Helps eliminate interference when detecting near other metal detectors or electrical sources.
• אפליה מגרעת: Customize discrimination patterns to ignore unwanted metals.
• Pinpoint Function: Precisely locate targets for easier recovery.
• עיצוב קל משקל: Weighing approximately 1.32 kg, it is comfortable for extended use.

Figure 1: The Garrett ACE 400i Metal Detector, fully assembled. This image shows the main components including the search coil, shaft, control box, and arm cuff.

2. מידע בטיחות

Always exercise caution when operating the metal detector to prevent injury or damage to the device. Adhere to the following safety guidelines:

• Avoid using the detector near active electrical lines or in adverse weather conditions.
• Be aware of your surroundings, especially when digging.
• יש לפקח על ילדים במהלך הפעולה.
• Do not attempt to detect in areas where digging is prohibited or dangerous.
• תמיד יש לקבל אישור לפני גילוי בשטח פרטי.

3. רכיבים כלולים

Your Garrett ACE 400i package typically includes the following components:

• Garrett ACE 400i Control Box with Shaft
• 18 x 26 cm (7" x 10") PROformance™ DD Search Coil
• Search Coil Cover
• Garrett ClearSound Easy Stow Headphones
• Garrett ACE Environmental Cover-Up (Rain Cover for Control Box)
• AA Batteries (4 required, may or may not be included depending on region/seller)
• מדריך למשתמש (מסמך זה)

Figure 2: Garrett ClearSound Easy Stow Headphones, included with the detector for clear audio signals.

Figure 3: The protective cover for the search coil, designed to prevent scratches and wear during use.

4. הרכבה והתקנה

Follow these steps to assemble your Garrett ACE 400i metal detector:

1. חבר את סליל החיפוש:

   Align the search coil with the lower stem. Insert the plastic bolt through the holes on the coil and stem, then secure it with the wing nut. Ensure the coil cable is wrapped snugly around the lower and middle stems.

   

   Figure 4: The DD search coil, which attaches to the lower shaft of the detector.

2. חבר את תיבת הבקרה:

   Slide the control box onto the upper shaft. Secure it using the provided cam-locks. The new cam-lock rings prevent movement and play over time.

   

   Figure 5: The control box attached to the upper shaft, showing the arm cuff and handle.
3. הכנס סוללות:

   Open the battery compartment on the control box. Insert four (4) AA batteries, ensuring correct polarity. Close the compartment securely.

4. Adjust Length and Arm Cuff:

   Adjust the length of the shaft to a comfortable height, allowing the search coil to be parallel to the ground when you are standing upright. Adjust the arm cuff for a snug but comfortable fit on your forearm.

5. חיבור כבל סליל:

   Plug the search coil cable connector into the corresponding port on the control box. Ensure a secure connection.

5. הוראות הפעלה

Familiarize yourself with the control panel and its functions before beginning your search.

Figure 6: Close-up of the Garrett ACE 400i control panel, showing the LCD screen and various buttons.

5.1. הפעלה / כיבוי

לחץ והחזק את כּוֹחַ button to turn the detector on or off. The detector will power on in the last used search mode.

5.2. Understanding the Display (LCD)

The large LCD screen provides crucial information:

• סמן זיהוי יעד: Indicates the probable target type (e.g., Iron, Foil, Nickel, Zinc, Copper, Silver).
• Digital Target ID (1-100): A numerical value representing the target's conductivity. Higher numbers indicate more conductive targets (e.g., silver coins), while lower numbers indicate less conductive targets (e.g., iron).
• אינדיקטור עומק: Estimates the depth of the target in centimeters (5cm, 10cm, 15cm, 20+cm).
• מחוון רמת הסוללה: מציג את חיי הסוללה שנותרו.
• מחוון רגישות: מציג את הגדרת הרגישות הנוכחית.

5.3. מצבי חיפוש

The ACE 400i features five pre-programmed search modes. Press the MODE כפתור כדי לעבור ביניהם:

• Zero-Disc: All-metal mode. Detects all types of metal without discrimination.
• תַכשִׁיטִים: Designed to ignore iron and small trash items, focusing on jewelry.
• מִנְהָג: Allows you to create and save your own discrimination pattern. Use the DISCRIM ו V/X buttons to adjust the NOTCH segments.
• מַטְבֵּעַ: Optimized for coin hunting, typically discriminating against iron and some foil.
• Relics: Designed to find relics, often with minimal iron discrimination, as many historical artifacts contain iron.

5.4. התאמת רגישות

השתמש ב- רְגִישׁוּת כפתורים (+ ו -) to adjust the detector's sensitivity. Higher sensitivity increases detection depth but can also lead to more false signals in mineralized ground or areas with electrical interference. Adjust as needed for stable operation.

5.5. Discrimination (NOTCH and Iron Audio)

• NOTCH Discrimination: In Custom mode, you can eliminate specific target segments from detection. Use the DISCRIM button to move the cursor and V/X to toggle segments on/off.
• ברזל אודיו: הקש על אודיו של ברזל button to activate this feature. It allows you to hear discriminated iron targets at a low tone, even when they are notched out. This helps in identifying complex targets (e.g., a valuable non-ferrous target next to iron) and avoiding large iron objects.

5.6. התאמת תדר

The ACE 400i operates at 10 kHz. If you experience interference from other detectors or electrical sources, press the FREQ ADJ button to slightly shift the operating frequency, which can help mitigate interference.

5.7. Pinpoint Function

Once a target is detected, press and hold the PIN PININT button (target icon). Keep the coil steady over the target. The detector will emit a continuous tone, and the signal strength indicator on the LCD will help you center the coil directly over the target for precise location.

6. תחזוקה

• ניקוי: Wipe down the detector with a damp cloth after each use. Do not use abrasive cleaners or solvents. The control box is rain-resistant but not submersible.
• טיפול בסליל: Always use the search coil cover to protect the coil from scratches and impacts.
• החלפת סוללה: Replace batteries when the low battery indicator appears. Remove batteries if storing the detector for extended periods to prevent leakage.
• אִחסוּן: Store the detector in a cool, dry place. Avoid extreme temperatures.

7. פתרון תקלות

8. מפרטים

9. אחריות ותמיכה

For detailed warranty information, please refer to the official Garrett Metal Detectors website or contact your authorized dealer. Warranty terms and conditions may vary by region.

For technical support, troubleshooting assistance, or spare parts, please contact Garrett Customer Service through their official channels. Always provide your product model (ACE 400i) and serial number when seeking support.

סרטוני מוצר רשמיים: לא היו סרטוני מוצר רשמיים מהמוכר זמינים להטמעה במדריך זה.