מָבוֹא
The iOttie Easy One Touch Mini is a compact and fully functional mounting solution designed for easy installation into most vehicle air vents. This mount offers a safe, versatile, and highly functional way to secure your smartphone while driving. Its innovative Easy One Touch system allows for quick mounting and releasing of your device with a single finger press, ensuring convenience and safety on the road.

Figure 1: iOttie Easy One Touch Mini Air Vent Car Mount with a smartphone.
תכונות המוצר
- Easy One Touch System: Locks and releases your device with a single, simple touch.
- תאימות אוניברסלית: Fits all smartphones and their cases (e.g., OtterBox, Incipio) ranging from 2.3 to 3.5 inches wide.
- אוֹפְּטִימָלִי Viewזוויות: The cradle rotates 360 degrees at the swivel ball for customizable viewing.
- Secure Vent Grip: Features a spring-loaded one-click lock and release mechanism for a strong, clamped hold to your vent blade, minimizing vibrations.
- ניהול כבלים משולב: Built-in support guides on the back hold charging wires in place for an organized setup.
תוכן החבילה
- מחזיק הר פתח
- מַחבֵּר
מדריך התקנה
Follow these steps to properly install your iOttie Easy One Touch Mini Air Vent Car Mount:
- להרכיב את ההר: Attach the cradle to the air vent clip. Ensure the ball joint is securely fastened by tightening the knurlאד אגוז.
- הכנס לתוך פתח אוורור: Locate a suitable air vent in your vehicle. Push the vent clip firmly into one of the vent blades.
- אבטח את התושבת: Once inserted, push the locking switch sideways (or twist the knob, depending on your specific model) to clamp the mount securely onto the vent blade. This minimizes movement and vibrations.
- לְהַתְאִים Viewזווית ing: Utilize the 360-degree rotating ball joint to position the cradle for optimal viewing.
Video 1: Demonstration of various air vent mount installations, including the twist-on and push-in types. This video provides visual guidance on how to securely attach the mount to different car vent designs.

Figure 2: The iOttie Easy One Touch Mini securely installed in a vehicle's air vent.
מִבצָע
Using your iOttie Easy One Touch Mini is simple and intuitive:
- הרכבת המכשיר שלך: Gently press your smartphone against the center button of the cradle. The side arms will automatically close and secure your device.
- רלהasing Your Device: Squeeze the release levers located on the sides of the cradle. The arms will open, allowing you to remove your smartphone.

Figure 3: Visual guide demonstrating the one-touch lock and release functionality.
סרטון 2: הצגת הדגמת מוצרasing the Easy One Touch mounting and releasing of a smartphone.
תַחזוּקָה
To ensure the longevity and optimal performance of your iOttie Easy One Touch Mini, regular maintenance is recommended:
- Clean Rubber Arms: Periodically clean the rubber gripping arms with a damp cloth. This prevents dirt and debris buildup that could reduce grip effectiveness.
- Check Vent Connection: Ensure the mount remains securely clamped to the air vent. Re-tighten the locking mechanism if any looseness is observed.
- הימנע מטמפרטורות קיצוניות: Prolonged exposure to extreme heat (e.g., direct sunlight in a parked car) can affect the mount's materials and adhesive properties.
פתרון בעיות
If you encounter any issues with your iOttie Easy One Touch Mini, consider the following:
- Mount Not Holding Securely:
- Ensure the vent clip is fully inserted into the air vent.
- Verify the locking mechanism is fully engaged and tightened.
- Check if your vent blades are compatible and strong enough to support the mount and your device.
- Phone Slipping from Cradle:
- Clean the rubber gripping arms as described in the Maintenance section.
- Ensure your phone is centered and pressed firmly against the one-touch button when mounting.
- Confirm your phone's width is within the supported range (2.3 to 3.5 inches).
- Difficulty with One Touch Mechanism:
- Ensure no debris is obstructing the internal mechanism.
- Apply gentle, firm pressure to the center button when mounting.
מפרטים
| מותג | iOttie |
| מספר דגם | HLCRIO124 |
| מידות המוצר | 2.2 x 4.8 x 5.7 אינץ' |
| משקל פריט | 1.6 אונקיות |
| צֶבַע | שָׁחוֹר |
| סוג הרכבה | פּוּרקָן |
| מכשירים תואמים | Smartphones (2.3 to 3.5 inches wide) |
| תכונות מיוחדות | Rotatable, Easy One Touch System, Cable Management |
אחריות ותמיכה
For warranty information, product support, or to inquire about replacement parts, please visit the official iOttie website or contact their customer service directly. iOttie is committed to providing high-quality products and excellent customer satisfaction.
אתה יכול גם לבקר ב iOttie Store on Amazon למידע נוסף והצעות מוצרים.





