מדריך למשתמש של מטהר המים KENT Super Plus RO

1. הקדמה

The KENT Super Plus RO Water Purifier is designed to provide 100% pure and safe drinking water through its advanced multiple purification process. This system combines RO (Reverse Osmosis), UF (Ultra Filtration), and TDS (Total Dissolved Solids) Control to remove dissolved impurities such as arsenic, rust, pesticides, and fluorides, while also eliminating bacteria and viruses. The integrated TDS control system allows for adjustment of the purified water's TDS level, ensuring essential natural minerals are retained for healthier drinking water.

Image: KENT Super Plus RO Water Purifier, showcasinהעיצוב החלקלק והרכיבים הפנימיים שלו.

2. הוראות בטיחות

אנא קראו בעיון את כל הוראות הבטיחות לפני הפעלת המכשיר כדי למנוע פציעה או נזק. שמרו מדריך זה לעיון עתידי.

• ודא שספק הכוח תואם את המפרטים המפורטים בתווית המוצר.
• אין לטבול את המכשיר, הכבל או התקע במים או נוזלים אחרים.
• Unplug the purifier from the power outlet when not in use, before cleaning, or during maintenance.
• אין להפעיל את המכשיר אם כבל או תקע פגומים, או אם הוא נפל או ניזוק בכל דרך שהיא.
• הרחק ילדים מהמכשיר במהלך פעולתו.
• Install the purifier in a location away from direct sunlight, heat sources, and corrosive chemicals.
• ודא אוורור נאות סביב היחידה.
• Only use genuine KENT spare parts for replacement to ensure optimal performance and safety.

3. תכולת החבילה

בעת פירוק האריזה, אנא ודא שכל הפריטים המפורטים להלן קיימים ולא ניזוקו:

• Main Unit (KENT Super Plus RO Water Purifier)
• תעודת אחריות
• מדריך למשתמש (מסמך זה)

Note: A pre-filter is not included with this package and may need to be purchased separately depending on your water source quality.

4. התקנה והתקנה

The KENT Super Plus RO Water Purifier is designed for wall-mounted installation. Professional installation is recommended to ensure proper functioning and adherence to safety standards.

4.1 בחירת אתר

• Choose a flat, stable wall surface near a water supply and a power outlet.
• Ensure adequate space around the unit for maintenance and air circulation.
• Avoid direct sunlight or areas prone to extreme temperatures.

4.2 שלבי התקנה (מעלview)

1. Mark the drilling points on the wall using the provided template (if applicable).
2. לקדוח חורים ולהכניס תקעים לקיר.
3. Mount the purifier securely on the wall.
4. Connect the raw water inlet pipe to the water supply.
5. Connect the purified water outlet pipe to the dispenser tap.
6. Connect the reject water pipe to a drain.
7. ודא שכל החיבורים מאובטחים וללא דליפות.
8. חבר את כבל החשמל לשקע חשמל מתאים.

Image: Diagram illustrating the multi-stage purification process including Sediment Filter, Carbon Filter, RO Membrane, TDS Controller, UF Membrane, and Post Carbon Filter, leading to 100% Pure Water.

5. הוראות הפעלה

Once installed and connected, the KENT Super Plus RO Water Purifier operates largely automatically.

5.1 הפעלה ראשונית

1. Turn on the raw water supply.
2. Plug in the power cord. The purifier will begin the purification process.
3. Allow the storage tank to fill completely. The purification process will stop automatically once the tank is full.
4. For the first use, discard the first two full tanks of purified water to flush out any manufacturing residues.

5.2 מזיגת מים

• Place a clean container under the dispenser tap.
• Turn the tap handle to dispense purified water.
• The purifier will automatically start purifying water again as the water level in the storage tank drops.

5.3 מחוון מפלס מים

The purifier features a water level indicator on the front panel, allowing you to easily monitor the amount of purified water available in the 8-liter storage tank.

The purification capacity of this unit is approximately 15 liters per hour, depending on the input water pressure and TDS levels.

6. תחזוקה

Regular maintenance is crucial for the optimal performance and longevity of your KENT Super Plus RO Water Purifier.

6.1 החלפת מסנן

The purification system relies on various filters and membranes. The lifespan of these components depends on the quality of the input water and usage volume. It is recommended to replace filters and membranes periodically as advised by KENT service personnel or when the water flow rate significantly decreases or taste changes.

• Sediment Filter & Carbon Filter: Typically replaced every 6-12 months.
• RO Membrane & UF Membrane: Typically replaced every 1-2 years, or as needed.
• מסנן פחמן לאחר: Typically replaced every 6-12 months.

Always use genuine KENT replacement parts. Contact authorized service centers for filter replacement.

6.2 ניקוי היחידה

• Unplug the purifier before cleaning.
• נגב את החלק החיצוני של היחידה בעזרת חומר רך, דamp בַּד. אין להשתמש בחומרי ניקוי שוחקים או ממסים.
• Clean the storage tank periodically by draining and rinsing it.

7. פתרון תקלות

If you encounter any issues with your KENT Super Plus RO Water Purifier, refer to the common problems and solutions below. If the problem persists, contact KENT customer support.

8. מפרטים

9. אחריות ותמיכה

Your KENT Super Plus RO Water Purifier comes with a comprehensive warranty and support package:

• אַחֲרָיוּת: 1 year warranty from the date of purchase.
• שירות מורחב: 3 years extended service free (Terms and Conditions apply).

For any service requests, technical assistance, or to inquire about terms and conditions for extended service, please contact KENT customer support. Ensure you have your product model number (AN_51246) and purchase details ready when contacting support.

למידע נוסף, ניתן לבקר באתר הרשמי KENT Store on Amazon.