KOAMTAC 674500

מדריך למשתמש של סוללת KOAMTAC KDC20/100/200 190mAh

דגם: 674500

מָבוֹא

This manual provides essential information for the proper use, maintenance, and troubleshooting of your KOAMTAC KDC20/100/200 190mAh replacement battery. This battery is designed to provide reliable power for your KDC20, KDC100, and KDC200 series devices. For optimal performance, it is recommended to replace your KDC battery annually.

מידע בטיחות

Please read and understand all safety precautions before using the battery. Improper handling can lead to damage, injury, or fire.

KDC20/100/200 190mAh battery installed in a device, showing a caution label for laser radiation.

Image: The KDC20/100/200 190mAh battery installed in a compatible device. Note the caution label on the device indicating "LASER RADIATION - DO NOT STARE INTO BEAM" for devices with laser components. This image highlights the proper placement of the battery within the device's battery compartment.

התקנה: התקנת סוללה

Follow these steps to properly install the 190mAh battery into your KDC20, KDC100, or KDC200 series device.

  1. Ensure your KDC device is powered off before beginning the installation.
  2. Locate the battery compartment on the back of your KDC device.
  3. If an old battery is present, carefully remove it.
  4. Align the new 190mAh battery with the battery compartment, ensuring the connector pins on the battery match the receptacle in the device.
  5. Gently push the battery into place until it is securely seated and the connector is fully engaged.
  6. Close the battery compartment cover, if applicable, ensuring it latches securely.
KOAMTAC KDC20/100/200 190mAh replacement battery with connector.

Image: The KOAMTAC KDC20/100/200 190mAh replacement battery. This image shows the compact blue battery pack with its small white connector and red and black wires, ready for installation into a compatible KDC device.

Operating: Charging and Usage

Once installed, the battery will power your KDC device. Follow these guidelines for charging and optimal usage.

טעינת הסוללה

שימוש בסוללה

תַחזוּקָה

Proper maintenance can extend the lifespan of your battery.

פתרון בעיות

אם נתקלת בבעיות עם הסוללה שלך, שקול את הפתרונות הנפוצים הבאים:

בְּעָיָהסיבה אפשריתפִּתָרוֹן
Device does not power on after battery installation.Battery not properly seated or not charged.Ensure battery is fully inserted. Charge the device for at least 30 minutes.
הסוללה מתרוקנת במהירות.Aging battery, heavy device usage, or environmental factors.Reduce device usage intensity. Consider replacing the battery if it's old (recommended annually). Ensure device firmware is up to date.
סוללה לא נטענת.Faulty charger/cable, dirty contacts, or damaged battery.Try a different charger/cable. Clean battery and device contacts. If problem persists, the battery may need replacement.

If troubleshooting steps do not resolve the issue, please contact KOAMTAC customer support.

מפרטים

תכונהפְּרָט
מספר דגם674500
קיבולת סוללה190 מיליאמפר/שעה
כרך ידtage3.7 וולט
הרכב תא הסוללהחומצת עופרת אטומה
מידות המוצר2 x 2 x 1 אינץ'
משקל פריט8 אונקיות
יַצרָןKOAMTAC

מידע על אחריות

KOAMTAC provides a limited warranty for its products. For specific warranty terms and conditions applicable to the KDC20/100/200 190mAh battery, please refer to the official KOAMTAC webאתר או צרו קשר ישירות עם תמיכת הלקוחות שלהם. שמרו את הוכחת הרכישה שלכם לצורך תביעות אחריות.

תמיכת לקוחות

For further assistance, technical support, or inquiries regarding your KOAMTAC KDC20/100/200 190mAh battery, please contact KOAMTAC customer support through their official channels.

מסמכים קשורים - 674500

מִרֹאשׁview מדריך התקנה, טיפול ותחזוקה של פאנלים מעץ של Interbuild
Comprehensive guide from Interbuild on how to properly store, install, care for, and maintain wood panels, butcher block countertops, desktops, and vanity tops. Includes essential information on acclimatization, oiling, expansion gaps, and repair.
מִרֹאשׁview מדריך KOAMTAC KDC80 Mini: הגדרה ותפעול של סורק ברקודים עם Bluetooth
מדריך תמציתי להתקנה ותפעול של סורק הברקודים KOAMTAC KDC80 Bluetooth, הכולל הפעלה/כיבוי, צימוד Bluetooth, הפעלה בסיסית ומפרטים טכניים.
מִרֹאשׁview מדריך מיני ל-KOAMTAC SKX7Pro SmartSled
מדריך תמציתי למזחלת ה-KOAMTAC SKX7Pro SmartSled, המכסה את תכונותיה, תפעול בסיסי, אפשרויות קישוריות, שילוב תוכנה ואביזרים זמינים. למד כיצד להפעיל/לכבות, לחבר באמצעות USB ולהשתמש בתוכנות KTSync SKX ו-KOAMTACON.
מִרֹאשׁview מדריך מהיר ל-KOAMTAC KDC200: התקנה ושימוש
מדריך מהיר להתקנה ושימוש בסורק הברקודים KOAMTAC KDC200 Bluetooth, הכולל הצגת המוצר, צימוד Bluetooth, מצבי שימוש (מקלדת HID, KTSync לאנדרואיד/iOS) ומפרטים טכניים.
מִרֹאשׁview KOAMTAC KDC UHF Tag מדריך הדגמה לקריאה/כתיבה
מדריך זה מספק הוראות מפורטות לשימוש במכשיר KOAMTAC KDC UHF. למד כיצד להתקין את אפליקציית ההדגמה, לחבר את ה-KDC למכשירים חכמים באמצעות Bluetooth, לקרוא ולכתוב UHF. tag נתונים, ניהול tag security (lock/kill), configure UHF settings, and utilize the SDK API. It covers essential operations for efficient RFID tag הַנהָלָה.
מִרֹאשׁview מדריך KOAMTAC KDC20 Mini: הגדרה ותפעול של סורק ברקודים עם Bluetooth
מדריך תמציתי לסורק הברקודים KOAMTAC KDC20 Bluetooth, הכולל התקנה, הפעלה/כיבוי, הפעלה בסיסית, Bluetooth profiles, זיווג, פונקציונליות טריז מקלדת, KTSync, KOAMTACON ומפרטים טכניים.