Sharp SPC800

Sharp SPC800 Quartz Analog Twin Bell Alarm Clock

מדריך הוראות

המוצר נגמרview

The Sharp SPC800 is a classic quartz analog twin bell alarm clock designed for reliable timekeeping and a powerful alarm. Its traditional design features a clear dial and durable metal construction, making it a functional addition to any bedroom.

חֲזִית view of the Sharp SPC800 Quartz Analog Twin Bell Alarm Clock in silver.

תמונה: חזית view of the Sharp SPC800 Quartz Analog Twin Bell Alarm Clock, showcasing its silver finish and classic twin bell design.

Diagram showing key features of the Sharp SPC800 alarm clock: easy to read dial, loud twin bell alarm, touch activated backlight, and 1x AA battery operation.

Image: A diagram highlighting the main features of the alarm clock, including its easy-to-read dial, loud twin bell alarm, touch-activated backlight, and requirement for one AA battery.

הגדרה

1. התקנת סוללה

The Sharp SPC800 alarm clock requires one (1) AA battery (not included) for operation. Ensure the battery is inserted with the correct polarity (+/-) as indicated in the battery compartment.

  1. אתר את תא הסוללות בגב השעון.
  2. פתח את מכסה תא הסוללות.
  3. Insert one (1) AA battery, matching the positive (+) and negative (-) terminals with the markings inside the compartment.
  4. סגור היטב את מכסה תא הסוללות.

2. הגדרת זמן ראשונית

After installing the battery, set the current time.

  1. Locate the "TIME SET" knob on the back of the clock.
  2. Rotate the "TIME SET" knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.
בְּחֲזָרָה view of the Sharp SPC800 alarm clock showing the time set knob, alarm set knob, and alarm on/off switch.

תמונה: אחורי view of the alarm clock, illustrating the location of the time setting knob, alarm setting knob, and the alarm on/off switch.

הוראות הפעלה

1. Setting the Alarm Time

To set the desired alarm time:

  1. Locate the "ALARM SET" knob on the back of the clock.
  2. Rotate the "ALARM SET" knob until the small red alarm hand on the clock face points to your desired alarm time.
  3. For precise setting, it is recommended to advance the main time hands past the desired alarm time to ensure the alarm hand is correctly positioned for AM/PM if applicable (though this is an analog clock, so it's a 12-hour cycle).

2. הפעלה/כיבוי האזעקה

The alarm is activated and deactivated using the ON/OFF switch located on the back of the clock.

3. שימוש בתאורה האחורית

עֲבוּר viewing the time in low light conditions:

תַחזוּקָה

1. החלפת סוללה

To ensure optimal performance, it is recommended to replace the AA battery approximately every six months, or when the clock's accuracy diminishes or the backlight becomes dim.

  1. בצע את שלבי התקנת הסוללה המפורטים בסעיף "התקנה".
  2. השלך סוללות ישנות באחריות בהתאם לתקנות המקומיות.

2. ניקיון

To clean the clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.

פתרון בעיות

בְּעָיָהסיבה / פתרון אפשרי
Clock not keeping accurate time or stops working.Battery is low or depleted. Replace with a fresh AA battery. Ensure battery is inserted with correct polarity.
האזעקה לא נשמעת.Ensure the alarm ON/OFF switch on the back is in the "ON" position. Check battery level and replace if necessary. Verify the alarm hand is correctly set.
התאורה האחורית עמומה או לא פועלת.Battery is low. Replace with a fresh AA battery.
Audible ticking sound.This is normal for a quartz analog movement and not an indication of a defect. The sound may be more noticeable in quiet environments.
Alarm rings slightly before or after the set time.Due to the analog nature, minor variations in alarm activation time (a few minutes) can occur. This is typical for this type of mechanism.

מפרטים

Diagram showing the dimensions of the Sharp SPC800 alarm clock: 4.6 inches wide, 6.5 inches high, and 2.2 inches deep.

Image: A visual representation of the alarm clock's dimensions, indicating a width of 4.6 inches, a height of 6.5 inches, and a depth of 2.2 inches.

אחריות ותמיכה

This Sharp SPC800 Quartz Analog Twin Bell Alarm Clock comes with a אחריות מוגבלת. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact Sharp customer support.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please visit the official Sharp webבאתר או צרו קשר עם מחלקת שירות הלקוחות שלהם. פרטי התקשרות ניתן למצוא בדרך כלל על אריזת המוצר או על כתב היצרן webאֲתַר.

מסמכים קשורים - SPC800

מִרֹאשׁview Sharp SPC800-SPC851 Alarm Clock: User Manual and Safety Instructions
Comprehensive guide for the Sharp SPC800-SPC851 Alarm Clock, covering setup, operation, battery replacement, care, safety precautions, and FCC compliance.
מִרֹאשׁview שעון מעורר LED SHARP SPC189/SPC193 עם יציאת USB: מדריך הוראות ואחריות
מדריך הוראות רשמי ומידע אחריות עבור שעון מעורר LED SHARP SPC189 ו-SPC193 עם יציאות טעינה USB. למד כיצד לכוון את השעה, השעון המעורר, להשתמש בתנועת נודניק, טעינה USB ואמצעי זהירות.
מִרֹאשׁview שעון מעורר זריחה SPC268 עם יציאת USB: מדריך הוראות ואחריות
מדריך הוראות רשמי ומידע אחריות עבור שעון מעורר זריחה SHARP SPC268 עם יציאת USB. למד כיצד לכוון את השעון, את ההתראות, להשתמש באורות הזריחה ובאורות שינוי הצבעים, ולהבין את אמצעי הזהירות.
מִרֹאשׁview שעון מעורר SHARP SPC543 עם יציאת USB - מדריך הוראות
מדריך הוראות רשמי ומידע על אחריות עבור שעון מעורר הקרנה SHARP SPC543 עם יציאת USB. למד כיצד לכוון את השעון, השעון המעורר והתאריך, להשתמש בתכונת ההקרנה ולהבין את הוראות הבטיחות.
מִרֹאשׁview מדריך למשתמש והוראות לשעון מעורר דיגיטלי SHARP SPC500 LCD
מדריך למשתמש והוראות רשמי עבור שעון מעורר דיגיטלי LCD מדגם SHARP SPC500. למד כיצד לכוון את השעה, להגדיר את השעון המעורר, להשתמש בתכונות הנודניק והתאורה האחורית, ולהבין את אזהרות ספק הכוח והסוללה. כולל מידע של FCC.
מִרֹאשׁview מדריך למשתמש לשעון מעורר דיגיטלי SHARP SPC483/SPC222
מדריך למשתמש המספק הוראות להתקנה ותפעול של שעוני המעורר הדיגיטליים SHARP SPC483 ו-SPC222, כולל תכונות, הפעלה, טיפול ותאימות לתקן FCC.