1. הקדמה
The TOOLTOP Network Cable Tester is a versatile device designed for professionals and DIY enthusiasts to efficiently test and troubleshoot network cables. Available in two models, ET622 and ET623, it offers a range of functions including cable mapping, network length measurement, PoE testing, and crystal head crimping tests. The ET623 model further integrates a full-featured digital multimeter for enhanced utility.
This manual provides detailed instructions on how to set up, operate, and maintain your TOOLTOP Network Cable Tester to ensure accurate and reliable performance.
Figure 1: TOOLTOP Network Cable Tester (ET623 model shown)
2. התקנה
2.1. Unboxing ובדיקה ראשונית
Upon receiving your TOOLTOP Network Cable Tester, carefully unbox all components and inspect them for any signs of damage. The package contents typically include:
- Network Cable Tester (Host Unit)
- Receiver (Wire Tracker)
- USB Cable (for host charging)
- כבל RJ45
- קליפ תנין
- מדריך למשתמש באנגלית
- תיבת אחסון
- Multimeter Test Leads (Only for ET623 model)
- 7 x Remote ID (Only for ET623 model)
סרטון 1: פתיחת הקופסה ומעבר לכךview of the Network Cable Tester.
2.2. ספק כוח
- יחידת מארח: The main tester unit is powered by a built-in 1250mAh rechargeable lithium battery. Charge the host unit using the provided USB cable and a standard USB power adapter (not included).
- יחידת מקלט: The receiver unit requires one 9V battery (not included). Open the battery compartment on the back of the receiver and insert the 9V battery, observing correct polarity.
2.3. המכשיר נגמרview
Familiarize yourself with the main components of the tester:
Figure 2: Product Description with labeled parts.
- מסך צבעוני LCD: 3.2-inch display for clear readings.
- יציאת טעינה מסוג USB: For charging the host unit.
- Tracing Sensor: Used by the receiver for wire tracing.
- לחצן מצב: To switch between different testing modes.
- פָּנַס כִּיס: לתאורה בסביבות חשוכות.
- לוח מקשים: לניווט ובחירת פונקציות.
- RJ-45 Cable Jack: לחיבור כבלי רשת.
- Network Cable Length Port: Dedicated port for length measurement.
- Sound/Sensitivity Adjusting Wheel: On the receiver for adjusting tracing sensitivity.
3. הוראות הפעלה
The TOOLTOP Network Cable Tester offers various functions. Select the appropriate mode using the 'MODE' button on the host unit.
3.1. Network Cable Length Measurement
This function measures the length of RJ45 8-core or 4-core network cables, telephone lines, and BNC video cables up to 400 meters.
- Connect one end of the cable to the designated 'Length' port on the host unit.
- Select the 'Length Measurement' mode on the device.
- The screen will display the measured cable length.
Figure 3: Network Length Measurement in progress.
3.2. Cable Mapping (Wire Sequence Test)
This function tests for open circuits, crossovers, and short circuits in network cables. The LCD provides clear and intuitive display results.
- Connect one end of the network cable to the main unit's RJ45 port.
- Connect the other end of the cable to the receiver unit's RJ45 port.
- Select the 'Cable Mapping' mode. The screen will display the wiring status (normal, short, cross, or break).
Figure 4: Cable Mapping results for various fault types.
3.3. Crystal Head Crimping Test (QC)
This test verifies if the network cable's crystal head (RJ45 connector) is properly crimped and connected.
- Insert the crimped RJ45 connector into the designated QC port on the host unit.
- The device will indicate if the crimping is correct or if there's an issue (e.g., 'Line 1-core wire is not properly crimped, and the No.1 light does not light up').
Figure 5: QC-Connector Crimping Test.
3.4. Tracing Cables (Line Finding Test)
This feature helps quickly locate a target cable among a bundle, offering both digital and vibration modes.
- Connect the network cable to be traced to the main unit.
- Select the 'Tracing Cables (Scan)' mode.
- Use the receiver unit to scan the cables. The receiver will emit a sound (digital mode) or vibrate (vibration mode) when it detects the target cable. Adjust sensitivity with the wheel on the receiver.
Figure 6: Two-in-one line finding and lighting (Flashlight/Digital tracing).
3.5. POE Testing
Test Power over Ethernet (PoE) systems to determine voltage and polarity, compatible with standard and non-standard IEEE802.3AF/AT.
- Connect the network cable from the PoE source (e.g., PoE switch) to the tester.
- Select the 'PoE Test' mode.
- The device will display the PoE voltage וקוטביות.
Figure 7: POE Testing showing voltage and pin power.
3.6. פורט פלאש
This function helps identify the corresponding port on a switch or router by making its link/activity LED flash.
- Connect the network cable from the tester to a port on the network device (e.g., switch).
- Select the 'Port Flash' mode.
- The corresponding port's LED on the network device will flash, allowing for easy identification.
Figure 8: Switch Port Flicker function.
3.7. Remote ID Mapping (Optional)
For identifying multiple cable runs in one step, optional remote ID adapters can be used.
- Connect the main unit to one end of a cable.
- Connect a remote ID adapter to the other end of the cable.
- The tester will display the ID of the connected remote adapter, allowing you to map cables.
Figure 9: Remote ID Mapping (Adapter is optional).
3.8. NCV Test (Non-Contact Voltage)
Detects whether a circuit is live without direct contact. The sensitivity is adjustable.
- Select the 'NCV' mode.
- Bring the top of the receiver unit close to the suspected live wire or outlet.
- המכשיר יצביע על נוכחות של עוצמת ACtage. Adjust sensitivity as needed.
Figure 10: NCV Test in action.
3.9. Multimeter Functions (ET623 Only)
The ET623 model includes a comprehensive multimeter for various electrical measurements.
- Connect the multimeter test leads to the appropriate ports on the host unit.
- Select the desired measurement mode (AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Continuity, Diode) using the 'MODE' button.
- Follow standard multimeter practices for taking measurements.
Figure 11: Multimeter Function (ET623) - AC/DC Voltage, Capacitance, Resistance.
Figure 12: Multimeter Function (ET623) - Continuity, Diode, Capacitance, Resistance, AC/DC Current.
3.10. פנס
The device includes a built-in flashlight for working in dimly lit areas. Activate it as needed during operation.
4. תחזוקה
- ניקוי: השתמשו במטלית רכה ויבשה לניקוי המכשיר. אין להשתמש בחומרי ניקוי שוחקים או ממסים.
- טיפול בסוללה: Recharge the host unit regularly, especially if it will not be used for an extended period. Replace the 9V battery in the receiver unit when the low battery indicator appears.
- אִחסוּן: Store the device in its protective case in a cool, dry place away from direct sunlight and extreme temperatures.
- כִּיוּל: The device is factory calibrated. If you suspect inaccuracies, contact customer support for assistance.
5. פתרון תקלות
- המכשיר לא נדלק: Ensure the host unit's battery is charged or the receiver's 9V battery is correctly installed and not depleted.
- Inaccurate length measurement: Verify that the cable is properly connected to the 'Length' port and that the cable type is supported.
- Cable mapping errors: Check that both ends of the cable are securely connected to the main unit and receiver. Inspect the RJ45 connectors for damage.
- Wire tracing not working: Ensure the receiver's sensitivity is adjusted appropriately. Check the receiver's 9V battery.
- Multimeter (ET623) not reading: Confirm test leads are correctly inserted and making good contact with the circuit. Ensure the correct measurement mode is selected.
If issues persist, refer to the detailed troubleshooting section in the included printed manual or contact customer support.
6. מפרטים
מפרט כללי
| תכונה | מִפרָט |
|---|---|
| לְהַצִיג | מסך LCD צבעוני בגודל 3.2 אינץ ' |
| Power Supply (Host) | סוללת ליתיום נטענת 1250mAh (כלולה) |
| ספק כוח (מקלט) | 1*9V battery (NOT INCLUDED) |
| טווח מדידת אורך כבל | 2.5m ~ 400m (8ft ~ 1312ft) |
| Cable Length Accuracy | 2% ±1m |
| סוגי כבלים נתמכים | RJ45 8-core Ethernet Cable, RJ45 4-core Ethernet Cable, Telephone Cable, BNC Cable |
| Crystal Head Crimp Test (QC) | תְמִיכָה |
| Switch Flash | 10/100/1000 Mbps |
| מיפוי כבלים | Support (Open, Cross, Short Circuit) |
| Breakpoint Measure | תְמִיכָה |
| תאורת פנס | תְמִיכָה |
| מבחן POE | כרך ידtage/קוטביות |
| NCV Testing Sensitivity | מתכוונן |
| Digital Tracing Sensitivity | מתכוונן |
| מיפוי מזהה מרחוק | אופציונלי |
| כיבוי אוטומטי | תְמִיכָה |
פונקציות ספציפיות למודל
| פוּנקצִיָה | ET622 | ET623 |
|---|---|---|
| Crystal Head Crimp Test (QC) | כֵּן | כֵּן |
| Enter Connection Prompt | כֵּן | כֵּן |
| Switch Tracing (W/POE) | כֵּן | כֵּן |
| מיפוי כבלים | כֵּן | כֵּן |
| Switch Indicators Flashing | כֵּן | כֵּן |
| בדיקת מעגל קצר/פתוח כבל רשת | כֵּן | כֵּן |
| Network Cable Breakpoint Measure | כֵּן | כֵּן |
| כרך ידtage בדיקה | כֵּן | כֵּן |
| LCD Size: 55*57mm Color Screen | כֵּן | כֵּן |
| NCV Testing/Digital Tracing Sensitivity Adjustable | כֵּן | כֵּן |
| פָּנַס כִּיס | כֵּן | כֵּן |
| POE Voltage Value /Polarity | כֵּן | כֵּן |
| Remote ID Mapping optional | כֵּן | כֵּן |
| פונקציית זיהוי סוללה חלשה | כֵּן | כֵּן |
| כיבוי אוטומטי | כֵּן | כֵּן |
| מדידת מולטימטר | לֹא | כֵּן |
Figure 13: Product Parameters for ET622 and ET623.
Multimeter Specifications (ET623 Only)
| מְדִידָה | לָנוּעַ | דִיוּק |
|---|---|---|
| מודד | 6000 COUNT | |
| DC כרךtage | 600.00mV ~ 1000V | ± 0.5% + 0.3 |
| AC כרךtage | 6V~600V | ± 1% + 3 |
| זרם DC | 999.9mA ~ 9.999A | ± 1.2% + 3 |
| זרם חילופין | 999.9mA ~ 9.999A | ± 1.5% + 3 |
| הִתנַגְדוּת | 600.0Ω~60.00MΩ | ± 1.5% + 5 |
| קיבול | 6.000nF~666.6μF, 6.000mF-60.00mF | ±2.0%+6, ±5%+20 |
| הֶמשֵׁכִיוּת | <10Ω (buzzer sounds) | |
| דיודה | תְמִיכָה | |
Figure 14: Special Functions and Multimeter Specifications.
7. טיפים למשתמשים
- For accurate cable length measurements, ensure the cable is disconnected from all network devices.
- When using the wire tracing function, adjust the sensitivity on the receiver to avoid interference from nearby cables.
- Always power off the device when not in use to conserve battery life.
- Keep the screen clean and free from scratches for optimal visibility.
8. אחריות ותמיכה
למידע על אחריות, תמיכה טכנית או שאלות בנוגע לשירות, אנא עיינו בפרטי הקשר המצורפים למסמכי הרכישה שלכם או בקרו באתר הרשמי של TOOLTOP webאתר. שמור את הוכחת הרכישה שלך לצורך תביעות אחריות.
