1. הקדמה
This manual provides detailed instructions for the operation and maintenance of your TOOLTOP Network Cable Tester and Multimeter (Models ET622 and ET623). Please read this manual thoroughly before using the device to ensure safe and efficient operation.
המוצר נגמרview וִידֵאוֹ
Video: Unboxing and demonstration of key features of the TOOLTOP Network Cable Tester.
2. תכונות מוצר
- Network Cable Length Measurement: Measures lengths from 2.5 to 400 meters for RJ45 (8-core or 4-core), telephone, and BNC video cables.
- Crystal Head Crimping Test (QC): Verifies proper crimping and connection of network cables.
- Cable Mapping: Detects open circuits, crossovers, and short circuits in network cables.
- Digital Line Search: Noise-free tracing to quickly locate target lines, with adjustable sensitivity.
- בדיקת POE: Determines polarity and displays voltage value for standard and non-standard (IEEE802.3AF/AT) Power over Ethernet.
- תצוגה ברזולוציה גבוהה: Features a 3.2-inch color LCD for clear and intuitive results.
- Multimeter Function (ET623 only): Includes DC/AC Voltage, DC/AC Current, Resistance, Capacitance, Continuity, and Diode testing.
- סוללה נטענת: The host unit uses a 1250mAh rechargeable lithium battery.
- פָּנַס כִּיס: Built-in flashlight for convenience in low-light conditions.
- כיבוי אוטומטי: חוסך חיי סוללה.
תמונה: מעלview של תכונות המוצר.
3. תכולת החבילה
ET622 Package List:
- 1 x Network Cable Tester (Main Unit)
- 1 x מקלט
- 1 x כבל USB
- 1 x כבל RJ45
- 1 x Crocodile Clip
- 1 x מדריך למשתמש באנגלית
- 1 x תיבת אחסון
Image: ET622 Package Contents.
ET623 with 3 ID Package List:
- 1 x Network Cable Tester (Main Unit)
- 1 x מקלט
- 1 x כבל USB
- 1 x כבל RJ45
- 1 x Crocodile Clip
- 1 x מדריך למשתמש באנגלית
- 1 x תיבת אחסון
- 1 חוטי בדיקה למולטימטר
- 3 x Remote ID
Image: ET623 Package Contents with 3 ID remotes.
4. פריסת המכשיר ובקרות
Image: Product Description and Labeled Components.
Main Unit (Tester)
- מסך צבעוני LCD: 3.2-inch display for test results and menu navigation.
- יציאת טעינה מסוג USB: For recharging the internal lithium battery.
- יציאות RJ45: For connecting network cables for testing.
- לוח מקשים: For mode selection and navigation.
- Multimeter Input Jacks (ET623 only): For connecting test leads for multimeter functions.
Wire Tracker Receiver
- Tracing Sensor: Used to detect signals from the main unit for cable tracing.
- Sound/Sensitivity Adjusting Wheel: Controls the volume and sensitivity of the tracing function.
- לחצן מצב: Switches between digital and analog tracing modes.
- פָּנַס כִּיס: Provides illumination during cable tracing.
- RJ45 ג'ק: For connecting to cables during tracing.
5. התקנה ותפעול בסיסי
5.1 הפעלה/כיבוי
- לחץ והחזק את לחצן ההפעלה ביחידה הראשית כדי להפעיל או לכבות אותה.
- The device features an auto power-off function to conserve battery.
5.2 טעינת המכשיר
- Connect the main unit to a USB power source using the provided USB cable.
- The host unit has a 1250mAh rechargeable lithium battery.
- The receiver unit (if applicable) uses a 9V battery (not included).
6. הוראות הפעלה
6.1 Network Cable Length Measurement
- Connect one end of the network cable to the main unit's RJ45 port.
- Select the "Length" function on the device.
- The device will display the cable length (2.5m to 400m).
Image: Network Cable Length Measurement.
6.2 Cable Mapping
- Connect one end of the network cable to the main unit and the other end to the receiver.
- Select the "Mapping" function.
- The display will show the wiring status (Normal, Short, Cross, Break).
Image: Cable Mapping Display.
6.3 Crystal Head Crimping Test (QC)
- Connect the crimped RJ45 cable to the main unit.
- Select the "QC" function.
- The device will indicate if the crimping is correct or if there are issues (e.g., "Line 1-core wire is not properly crimped, and the No.1 light does not light up").
Image: QC-Connector Crimping Test.
6.4 Tracing Cables (Scan)
- Connect the network cable to the main unit.
- Select the "Scan" function.
- Use the receiver to trace the cable. The receiver will emit a sound (digital mode) or vibrate (vibration mode) when near the cable. Adjust sensitivity as needed.
Image: Tracing Cables (Digital Mode).
6.5 בדיקת POE
- Connect the network cable from a POE source (e.g., POE switch) to the main unit.
- Select the "POE" function.
- The device will display the POE voltage וקוטביות.
Image: POE Testing.
6.6 Port Flash
- Connect the network cable to the main unit and to a network device (e.g., switch).
- Select the "Flash" function.
- The corresponding port light on the network device will blink, helping to identify the connected port.
Image: Switch Port Flicker (Port Flash).
6.7 Remote ID Mapping (Optional for ET623)
- For ET623 models with Remote ID units, connect the remote ID unit to the far end of the cable.
- The main unit will display the ID of the connected remote, allowing for identification of multiple cable runs.
Image: Remote ID Mapping.
6.8 Multimeter Functions (ET623 Only)
The ET623 model integrates a full-featured multimeter. Connect the provided multimeter test leads to the appropriate jacks on the main unit.
- AC/DC כרךtage: מדוד כרךtage by selecting the appropriate mode and connecting leads to the circuit.
- זרם AC/DC: Measure current by selecting the appropriate mode and connecting leads in series with the circuit.
- הִתנַגְדוּת: Measure resistance by selecting the resistance mode and connecting leads across the component.
- קיבול: Measure capacitance by selecting the capacitance mode and connecting leads across the capacitor.
- הֶמשֵׁכִיוּת: Test for continuity with an audible buzzer.
- דיודה: Test diode functionality.
Image: Multimeter Functions (Continuity, Diode, Capacitance, AC/DC Current).
7. מפרטים
7.1 Network Cable Tester Specifications
| תכונה | ET622 | ET623 |
|---|---|---|
| Digital Tracing | מצב דיגיטלי | Digital and vibration |
| אורך כבל רשת | 2.5~400 מ' | |
| דיוק אורך | 2% ±1m | |
| Crystal Head Crimp Test (QC) | תְמִיכָה | |
| Enter Connection Prompt | תְמִיכָה | |
| Switch Tracing (with POE) | תְמִיכָה | |
| מיפוי כבלים | רגיל/פתוח/קצר/צלב | |
| Switch Flash | 10/100/1000 Mbps | |
| Breakpoint Measurement | נתמך | |
| כרך ידtage (battery) test | 1~60V(±2% or 0.5V) | מדידת מולטימטר |
| NCV Testing Sensitivity | מתכוונן | |
| Digital Tracing Sensitivity | מתכוונן | |
| תאורת פנס | תְמִיכָה | |
| מבחן POE | כרך ידtage/קוטביות | |
| Remote ID mapping | אופציונלי | |
| פונקציית זיהוי סוללה נמוכה | תְמִיכָה | |
| כיבוי אוטומטי | תְמִיכָה | |
| ספק כוח | 1250mAh (Host) rechargeable lithium battery (included) / 1*9V (receiver) battery (NOT INCLUDED) | |
| גודל LCD | 55*57mm Color Screen | |
| גוֹדֶל | Host 136 * 80 * 30mm / Receiver 185 * 35 * 27mm | |
Image: Product Parameters Comparison (ET622 vs ET623).
7.2 מפרט רב-מודד (ET623 בלבד)
| מְדִידָה | לָנוּעַ | דִיוּק |
|---|---|---|
| מודד | 6000 ספירות | |
| DC כרךtage | 600.00mV ~ 1000V | ± 0.5% + 0.3 |
| AC כרךtage | 6V~600V | ± 1% + 3 |
| זרם DC | 999.9mA ~ 9.999A | ± 1.2% + 3 |
| זרם חילופין | 999.9mA ~ 9.999A | ± 1.5% + 3 |
| הִתנַגְדוּת | 600.0Ω~60.00MΩ | ± 1.5% + 5 |
| קיבול | 6.000nF~666.6μF, 6.000mF-60.00mF | ±2.0%+6, ±5%+20 |
| הֶמשֵׁכִיוּת | ＜10Ω, buzzer sounds | |
| דיודה | תְמִיכָה | |
Image: Multimeter Specifications (ET623).
8. תחזוקה
- שמור על המכשיר נקי ויבש. השתמש רך, דamp מטלית לניקוי; אין להשתמש בחומרי ניקוי שוחקים או ממסים.
- יש לאחסן את המכשיר במארז המגן שלו כאשר אינו בשימוש כדי למנוע נזק.
- Ensure the battery is charged regularly, especially if the device is stored for extended periods.
- Replace the receiver's 9V battery when the low battery indicator appears.
9. פתרון תקלות
- המכשיר לא נדלק: Check battery level and ensure it is charged. For the receiver, check the 9V battery.
- Inaccurate length measurement: Ensure the cable is properly connected and undamaged. Verify the cable type is supported.
- Cable mapping errors: Re-crimp connectors if necessary. Ensure connections are secure.
- Tracing signal is weak or absent: Adjust the sensitivity on the receiver. Ensure the main unit is transmitting a signal. Check for excessive electromagnetic interference.
- Multimeter readings are incorrect (ET623 only): Ensure test leads are correctly inserted and making good contact. Check the battery level.
10. טיפים למשתמשים
- For best results in cable tracing, try to minimize interference from other electronic devices.
- When performing crimping tests, ensure the cable ends are cut cleanly and inserted fully into the RJ45 connector before crimping.
- Always refer to the display prompts for connection status and error messages.
- Keep the remote ID units organized and labeled if you are using multiple for large installations.
11. אחריות ותמיכה
למידע בנוגע לאחריות, תמיכה טכנית או שאלות בנוגע לשירות, אנא עיינו בפרטי הקשר שסופקו על ידי הקמעונאי שלכם או על ידי פקיד היצרן. webאתר. שמור את קבלת הרכישה כהוכחת קנייה.
