LAUNCH CNC605A Injector Cleaner & Tester User Manual

1. הקדמה

The LAUNCH CNC605A Injector Cleaner & Tester is an advanced electromechanical product designed for cleaning and testing fuel injectors. Utilizing ultrasonic cleaning technology and precise fuel pressure control, this equipment simulates engine working conditions to effectively clean and test GDI, EFI, and SFI injectors. It also supports on-vehicle cleaning of injectors and the fuel supply system.

2. תכונות עיקריות

• ניקוי אולטרסאונד עוצמתי: Offers complete cleaning to injectors/pump, removing carbon deposits.
• Stable Testing Pressure: Microcomputer-controlled stable testing pressure with a large adjustable range.
• פעולה אוטומטית: Supports automatic cleaning, testing injectors, and real-time monitoring of dynamic values via microcomputer control and LCD display.
• Automatic Fuel Draining: Features automatic fuel draining through preset programs for specific test items.
• עיצוב אנושי: System pressure can be quickly restored to default values.
• ממשק משתמש: LCD display for operation details and touch button controls.

3. מפרטים

3.1. תנאי עבודה

• טֶמפֶּרָטוּרָה: -10℃ עד +40℃
• לחות יחסית: <85%
• עוצמת השדה המגנטי החיצוני: <400Am
• בְּטִיחוּת: No naked flame within 2m of the equipment.

3.2. מפרט טכני

4. התקנה

Before operating the LAUNCH CNC605A, ensure the following setup steps are completed:

1. פריקת אריזה: Carefully remove the main unit and all accessories from the packaging. Inspect for any damage.
2. מיקום: Place the unit on a stable, level surface in a well-ventilated area, away from any naked flames or sources of ignition.
3. חיבור חשמל: Connect the main unit to an AC220V~50/60Hz power supply. Ensure the voltage תואם את דרישות היחידה.
4. חיבור אספקת אוויר: Connect an air supply providing 5-8 bar pressure to the designated air inlet port.
5. Injector Preparation: Before placing injectors into the ultrasonic bathtub, clean their exterior thoroughly with a suitable cleaning liquid to remove dirt.

5. תפעול

The CNC605A offers various functions for comprehensive injector cleaning and testing. Follow these general steps for operation:

5.1. General Operating Procedure

1. ניקוי ראשוני: After external cleaning, place the injectors into the ultrasonic bathtub. Ensure the cleaning fluid does not exceed the connection port of the pulse line.
2. ניקוי קולי: Activate the ultrasonic system. This process dislodges carbon build-up and other particles from inside the injectors.
3. Mounting Injectors: Fix the cleaned injectors onto the main machine's test bench.
4. Test Liquid Addition: Add the appropriate test liquid to the glass tubes, ensuring it reaches at least half the tube's height.
5. Performing Tests: Select and perform the desired tests from the available functions.
6. Retesting: After cleaning cycles, return the injectors to the flow bench for retesting of all functions to verify performance improvement.

5.2. Specific Test Functions

• ניקוי קולי: Removes carbon deposition from injectors.
• Uniformity / Sprayability Test: Checks the uniformity of injection amount and monitors spray patterns using backlight.
• מבחן דליפה: Evaluates injector sealing and dribbling conditions under system pressure.
• Injecting Volume Test: Measures the injecting amount over 15 seconds of constant injection.
• Auto. Test: Runs a preset program of tests for injectors.
• On-vehicle Cleaning: Performs cleaning to remove carbon deposition directly on the vehicle.
• סְבִיבָה: Allows configuration of system parameters, including language.
• לִשְׁאוֹל: Provides access to equipment usage information.
• מֵידָע: Displays hardware and software version details.

6. תחזוקה

Proper maintenance ensures the longevity and optimal performance of your CNC605A Injector Cleaner & Tester.

• ניקוי רגיל: Keep the exterior of the machine clean. Wipe down surfaces with a soft, damp בַּד.
• Cleaning Fluid Management: After ultrasonic cleaning, the remaining cleaning fluid can be recycled for future use. Dispose of spent fluids according to local regulations.
• Test Liquid Management: Regularly check the level and condition of the test liquid. Replace or replenish as needed.
• ניקוי מזרק: Always clean the outside of injectors before placing them in the ultrasonic bathtub to prevent contamination of the cleaning fluid.
• אִחסוּן: When not in use, store the unit in a clean, dry environment within the specified temperature range.

7. פתרון תקלות

This section addresses common issues you might encounter with your CNC605A unit.

Issue: Unit does not power on.

• Ensure the power cable is securely connected to both the unit and a functional AC220V~50/60Hz power outlet.
• Verify that the power switch on the unit is in the "ON" position.
• בדוק את מקור המתח לעוצמת הקול הנכונהtage and functionality.

Issue: Ultrasonic cleaning is ineffective.

• Ensure the ultrasonic bathtub is filled with the correct cleaning liquid to the appropriate level.
• Verify that the injectors were externally cleaned before being placed in the bathtub.
• Check the ultrasonic power setting.

Issue: Inaccurate test results.

• Ensure the test liquid is clean and at the correct level in the glass tubes.
• Verify that the air inlet pressure is within the specified range (5-8 bar).
• Check for proper sealing of injectors on the test bench to prevent leaks during testing.
• Recalibrate the unit if necessary (refer to advanced settings or contact support).

Issue: Display language needs to be changed.

• Navigate to the "Setting" menu on the LCD display to adjust the system language.

8. טיפים למשתמשים

• כרך ידtage תאימות: The unit operates on AC220V. If your region uses 110V, a suitable voltage converter will be required to ensure proper operation and prevent damage.
• הגדרות שפה: The display language can be changed via the 'Setting' menu. Check for available language options to suit your preference.

9. אחריות ותמיכה

The LAUNCH CNC605A Injector Cleaner & Tester comes with a commitment to quality and customer support.

• תמיכה טכנית לכל החיים: LAUNCH provides lifetime technical support for this product.
• החלפה חינם: The product may be eligible for free replacement for 365 days from the date of purchase. Please refer to your purchase agreement for specific terms and conditions.
• For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your authorized LAUNCH dealer or customer service.