מָבוֹא
This manual provides detailed instructions for the safe and efficient use, maintenance, and troubleshooting of your Donlim DL-5028 Garlic Peeler Accessory. Please read this manual thoroughly before using the accessory to ensure optimal performance and longevity.
הוראות התקנה
The DL-5028 Garlic Peeler Accessory is designed to be used with the main Donlim DL-5028 garlic peeler unit (sold separately). Follow these steps to properly set up the accessory:
- בטיחות ראשונה: Ensure the main Donlim DL-5028 unit is unplugged from the power outlet before assembly or disassembly.
- הכנת שום: Separate garlic cloves from the bulb. There is no need to pre-peel them.
- מניחים שום: Put the desired amount of garlic cloves into the designated container or bowl that comes with your main Donlim DL-5028 unit.
- הכנס אביזר: Carefully place the DL-5028 Garlic Peeler Accessory into the container, ensuring its shaft aligns with the motor coupling of the main unit. It should fit securely.
הוראות הפעלה
Once the accessory is properly set up, you can begin peeling garlic:
- חיבור יחידה ראשית: Securely attach the main Donlim DL-5028 peeler unit to the container with the accessory and garlic cloves. Ensure it is locked into place according to your main unit's instructions.
- הפעלה: Plug the main unit into a power outlet.
- Activate Peeling: Turn on the main unit and allow the accessory to agitate the garlic cloves. The unique design of the accessory helps to gently remove the skins.
- תהליך ניטור: Continue operating until the garlic cloves are peeled to your satisfaction. This usually takes a short amount of time.
- כיבוי: Once peeling is complete, turn off the main unit and unplug it from the power outlet.
- Remove Garlic: Carefully detach the main unit and remove the accessory. You can then easily separate the peeled garlic cloves from the skins.
טיפול ותחזוקה
Proper cleaning and maintenance will extend the life of your accessory:
- פירוק: After each use, unplug the main unit and carefully remove the accessory from the container.
- ניקוי: Wash the accessory thoroughly with warm, soapy water. Use a soft brush if necessary to remove any stubborn garlic residue.
- שְׁטִיפָה: Rinse the accessory under running water to remove all soap.
- יִבּוּשׁ: Dry the accessory completely before storing. Air drying is recommended, or use a soft cloth.
- אִחסוּן: Store the accessory in a clean, dry place, away from direct sunlight and extreme temperatures.
Caution: Do not immerse the main motor unit in water. Only the accessory and container are washable.
פתרון בעיות
If you encounter issues with your garlic peeler accessory, refer to the following common problems and solutions:
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| Garlic not peeling effectively |
|
|
| Accessory not spinning |
|
|
מפרטים
| תכונה | פְּרָט |
|---|---|
| מספר דגם | DL-5028 |
| תְאִימוּת | Designed for Donlim DL-5028 Garlic Peeler main unit |
| חוֹמֶר | Durable food-grade material (plastic/silicone with metal shaft) |
| מָקוֹר | סין היבשתית |
| מידות החבילה (בקירוב) | 25 ס"מ (L) x 15 ס"מ (W) x 10 ס"מ (H) |
| משקל החבילה (בקירוב) | 0.2 ק"ג |
טיפים למשתמש
- This product is an accessory and requires the main Donlim DL-5028 garlic peeler unit to function. It does not come as a complete set.
- For best results, ensure garlic cloves are dry before placing them in the peeler.
- Do not overload the container; peel in batches if necessary for larger quantities.
אחריות ותמיכה
For any questions regarding the Donlim DL-5028 Garlic Peeler Accessory, including warranty information or technical support, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.
