YELLOW JACKET 2 Ton Extra Long Reach Floor Jack Instruction Manual

1. המוצר נגמרview

The YELLOW JACKET 2 Ton Extra Long Reach Floor Jack is designed for efficient and safe vehicle lifting in home workshops and professional garages. Its low-profile design allows access under vehicles with minimal ground clearance, while the extended reach chassis and dual-piston quick lift pump ensure rapid and precise lifting.

איור 1: מעלview of the YELLOW JACKET 2 Ton Floor Jack.

תכונות עיקריות:

• 2 Ton Lifting Capacity: Minimum lift height of 2-3/4 inches for low-clearance vehicles.
• Versatile Extended Lift Range: Maximum lift height of 24 inches, suitable for various passenger vehicles.
• Enhanced Reach & Rapid Lifting: Extra-long steel chassis and dual pump pistons for quick and efficient lifting.
• Durable Heavy-Duty Build: Constructed with premium heavy-duty steel for reliability and long-lasting performance. Features a universal joint release mechanism for controlled load descent.
• הגנה על פני השטח של הרכב: Includes a high-quality rubber saddle and a foam-covered handle to prevent damage to the vehicle.
• Convenient Foot Pedal Operation: Integrated foot pedal for hands-free operation and efficient raising.

Figure 2: The jack's wide lift range, from 2-3/4 inches to 24 inches.

Figure 3: Detail of the dual pump design for stable and faster lifting.

2. מידע בטיחות חשוב

Read and understand all instructions and warnings before using this product. Failure to follow these instructions may result in property damage, personal injury, or death.

• Always use on a hard, level surface. Avoid uneven or soft ground.
• אין לחרוג מהקיבולת המדורגת של 2 טון (4000 ליברות). Overloading can cause jack failure.
• Use jack stands. After lifting the vehicle, always support it with appropriately rated jack stands before working underneath. Never rely solely on the floor jack for support.
• Center the load. Ensure the saddle is centered on the vehicle's lifting point.
• ללבוש הגנה לעיניים. Always wear ANSI-approved safety goggles during operation.
• התרחק. Keep hands, feet, and other body parts clear of moving parts and the vehicle during lifting and lowering.
• בדוק אם יש נזילות. Inspect the jack for hydraulic fluid leaks before each use.
• אחסון נכון. אחסנו את המג'ק במקום נקי ויבש כאשר אינו בשימוש.
• אין לשנות. Never modify the jack or its components.

3. תכולת החבילה

Verify that all items are present and undamaged before proceeding with assembly or operation.

• מכלול ג'ק רצפה
• Handle Assembly (multi-piece)
• Rubber Pad for Saddle

4. הגדרה והכנה ראשונית

4.1 הרכבת ידיות

1. Locate the handle pieces. The handle typically consists of two or more sections that connect.
2. Assemble the handle sections by aligning the pins and holes, then securing them firmly.
3. Insert the assembled handle into the handle receiver on the jack. Ensure it is fully seated and secured, often with a set screw or pin.

Figure 4: The handle assembly and overall dimensions of the jack.

4.2 Purging Air from the Hydraulic System (Bleeding)

Air can become trapped in the hydraulic system during shipping or storage, affecting performance. Purge the system before first use:

1. Turn the handle counter-clockwise to open the release valve completely.
2. לחץ על הידית במהירות 10-15 פעמים ללא עומס.
3. סובב את הידית בכיוון השעון כדי לסגור את שסתום השחרור.
4. Test the jack by lifting it to its full height and then lowering it. Repeat if necessary until the jack operates smoothly.

5. הוראות הפעלה

5.1 Lifting a Vehicle

1. הכן את הרכב: חנה את הרכב על משטח קשה ומפולס. הפעל את בלם החניה וחסם את הגלגלים שיישארו על הקרקע.
2. מקם את הג'ק: Locate the manufacturer-recommended lifting points on your vehicle. Slide the floor jack under the vehicle, ensuring the rubber saddle is centered on the lifting point. The low-profile design and extra-long reach facilitate this.
3. הרם את הרכב: Turn the handle clockwise to close the release valve. Pump the handle (or use the foot pedal) to raise the vehicle to the desired height. Pump steadily until the vehicle is lifted.
4. Install Jack Stands: Immediately place appropriately rated jack stands under the vehicle's frame or designated support points. Lower the vehicle slowly onto the jack stands by gently turning the handle counter-clockwise. Ensure the vehicle is stable on the jack stands before proceeding with any work.

איור 5: ה-Low-Profile jack positioned under a vehicle's lifting point.

5.2 Lowering a Vehicle

1. להרים מעט: If the vehicle is on jack stands, pump the jack handle a few times to lift the vehicle slightly off the jack stands.
2. הסר את מעמדי הג'ק: הסר בזהירות את מעמדי הג'ק מתחת לרכב.
3. רכב תחתון: Slowly turn the handle counter-clockwise to open the release valve. The vehicle will begin to lower. Control the descent speed by adjusting how much you open the valve.
4. הסר את ג'ק: Once the vehicle is fully lowered and resting on its wheels, remove the floor jack.

6. תחזוקה

תחזוקה שוטפת מבטיחה את אורך החיים ואת פעולתו הבטוחה של מגבה הרצפה שלכם.

• סִיכָה: יש לשמן מעת לעת את כל החלקים הנעים בשמן מכונה קל.
• נוזל הידראולי: Check the hydraulic fluid level every three months. To check, lower the jack completely, remove the oil filler plug, and ensure the fluid is level with the bottom of the filler hole. Use only high-quality hydraulic jack oil.
• ניקוי: שמור על ניקיון המג'ק מלכלוך, שומן וחומרים קורוזיביים.
• בְּדִיקָה: Before each use, inspect the jack for any signs of damage, wear, or leaks. Do not use if damaged.
• אִחסוּן: אחסנו את המגבה במצב מוריד לחלוטין באזור נקי ויבש.

7. פתרון תקלות

8. מפרט מוצר

Figure 6: Key components of the floor jack, including the rubber saddle and low-profile גלגלים.

9. אחריות ותמיכת לקוחות

9.1 אחריות יצרן

This YELLOW JACKET floor jack is covered by a אחריות יצרן לשנה ממועד הרכישה. אחריות זו מכסה פגמים בחומרים ובביצוע בשימוש רגיל. היא אינה מכסה נזקים הנובעים משימוש לרעה, התעללות, תאונה, שינוי או תחזוקה לא נכונה.

9.2 תמיכת לקוחות

For technical assistance, warranty claims, or to order replacement parts, please contact YELLOW JACKET customer support:

• Webאֲתַר: Visit the YELLOW JACKET Store on Amazon
• אֶלֶקטרוֹנִי: support@yellowjackettools.com (Example, actual email not provided)
• טֵלֵפוֹן: 1-800-XXX-XXXX (Example, actual phone not provided)

Please have your model number (AS815009) and date of purchase ready when contacting support.