Lepro SW1-10

Lepro SW1 AI Smart Outdoor LED Strip Lights (32.8ft)

מדריך הוראות

מָבוֹא

This manual provides essential information for the safe and effective use of your Lepro SW1 AI Smart Outdoor LED Strip Lights. These 32.8ft IP65 waterproof RGBCW light strips offer tunable white light from 2700K to 5700K and are controlled via the Lepro app and voice commands. Please read these instructions thoroughly before installation and operation.

מה יש בקופסה

ודא שכל הרכיבים קיימים לפני תחילת ההתקנה.

  • 1 x 32.8 רגל רצועת LED אור
  • 1 x 9.84ft Cable with Controller
  • 1 x Wall Adapter (36V 24W)
  • 12 x תפסי הרכבה
  • 12 x Screws for Mounting
  • 12 x Anchors for Mounting
  • 4 x Cable Clips for Securing Power Supply & Controller
  • 4 x Screws for Securing Power Supply & Controller
  • 4 x Anchors for Securing Power Supply & Controller
  • 1 x מדריך למשתמש
Contents of the Lepro SW1 AI Smart Outdoor LED Strip Lights box
תמונה: כל הרכיבים הכלולים באריזת המוצר.

מידע בטיחות חשוב

  • This SW1 strip light is designed for outdoor use with an IP65 waterproof rating, making it dust-tight and protected from low-pressure water jets.
  • The power supply (adapter) is לֹא rated for direct outdoor exposure. It must be placed in an electrical box or a protected, dry location for safe and long-term usage.
  • Do not cut the strip lights. The length should be selected to closely match your requirements, as trimming will damage the product and void the warranty.
  • Ensure the installation surface is dry and clean before attaching the strip lights.
  • Always use the provided screws and clips to securely fasten the adapter, controller, and light strip. Adhesive backing alone may not be sufficient for long-term outdoor installation.
  • טווח טמפרטורות הפעלה: 20°C- עד 40°C- (4°F- עד 104°F).
Lepro SW1 LED strip light components with IP65 rating for strip, adapter, and controller
Image: Illustration of the IP65 waterproof rating for the strip light, adapter, and controller, highlighting the need to protect the adapter from direct outdoor exposure.

התקנה והתקנה

Follow these steps for proper installation and initial setup of your LED strip lights.

  1. בדוק את האורות: Before permanent installation, connect the strip light to the controller and power adapter, then plug it into an outlet to ensure all lights function correctly. Do not test while the strip is still rolled up.
  2. הכן את המשטח: Clean the desired installation surface thoroughly to remove any dust or debris. Ensure it is dry.
  3. Secure the Power Adapter: Place the power adapter in a suitable electrical box or a protected, dry outdoor location. It must not be directly exposed to weather elements.
  4. Secure the Controller: Use the provided clips and screws to securely fasten the controller to a dry, clean surface.
  5. חבר את רצועת ה-LED: Carefully peel away the backing paper from the adhesive on the light strip. Attach the strip to the cleaned surface.
  6. אבטח עם קליפסים: Use the provided clips and screws to further secure the LED strip in place along its entire length. This provides additional stability and ensures long-term adhesion, especially in outdoor conditions.
Step-by-step guide for installing Lepro SW1 LED strip lights
Image: Visual guide for the installation process, including testing, cleaning, and securing the strip with clips.

חיבור לאפליקציה

The Lepro SW1 strip light is controlled exclusively via the Lepro app. It is not compatible with the "Lepro Lampux" or "Smart Life" apps.

  1. Download the Lepro App: חפש "Lepro" in your device's app store and download the official application.
  2. רשום חשבון: Open the app and follow the prompts to register a new user account.
  3. הפעלת בלוטות' ו-Wi-Fi: Ensure your phone's Bluetooth is enabled and that your phone is connected to a 2.4GHz Wi-Fi network. The lights only support 2.4GHz Wi-Fi.
  4. הפעל את האורות: Plug in the strip lights to activate them.
  5. הוסף מכשיר: In the Lepro app, navigate to the homepage and click "Add Device".
  6. Find SW1: The app should automatically detect the SW1 device. Select it to proceed.
  7. התאמה עם Wi-Fi: Follow the in-app instructions to pair the device with your 2.4GHz Wi-Fi network.
  8. סִיוּם: Once paired, the lights are ready for control via the app.
Steps to connect Lepro SW1 LED strip lights to the Lepro App
Image: Visual steps for connecting the SW1 lights to the Lepro mobile application.

Video: Detailed installation and connection steps for the Lepro SW1 LED strip lights.

הוראות הפעלה

App Control (Lepro App)

The Lepro app provides comprehensive control over your SW1 LED strip lights, offering a wide range of customization options.

  • Millions of Color Options: Select from 16 million RGB colors and adjust brightness from 1-100%.
  • ניתן לכוונן לבן: Choose between 2700K warm white and 5700K cool daylight for various moods and year-round use.
  • LightGPM 4 - Personalized AI Lighting Designer: This feature learns your preferences and suggests lighting designs. The more you use it, the more tailored the lighting effects become.
  • Take a Photo, Get the Vibe: Upload an image (e.g., a room photo, movie poster) to the app, and LightGPM will generate a lighting design that matches the image's colors and mood.
  • LightBeats Music Sync: Sync your lights with music played through your phone's microphone for dynamic lighting effects. Keep the music sync page active and the phone screen on for continuous operation.
Lepro LightGPM 4 AI lighting designer in action on a house exterior
Image: Demonstrates the LightGPM 4 AI feature creating personalized lighting designs for a house.
Lepro app feature 'Take a Photo, Get the Vibe' for matching lighting to images
Image: Shows how to use the 'Take a Photo, Get the Vibe' feature to apply lighting themes based on an image.
Lepro app showing music sync feature with lights changing to music rhythm
Image: The LightBeats Music Sync feature in the Lepro app, allowing lights to dance to music.
House exterior with Lepro lights demonstrating tunable white and dimmable brightness
Image: Illustrates the tunable white (2700K warm white to 5700K daylight) and dimmable brightness features.
Lepro app interface for creating custom color glows on a modern house exterior
Image: The Lepro app interface for choosing custom colors and styles to create a personalized glow.

שליטה קולית

The Lepro SW1 lights are compatible with Amazon Alexa and Google Assistant for hands-free control.

  • Easy Voice Commands: Use simple voice commands to change colors, adjust brightness, or activate specific lighting themes. For example, say "Alexa, turn on the strip lights" or "Hey Google, set the lights to blue."
  • אין צורך במוקד: Direct connection via 2.4GHz Wi-Fi to the Lepro app enables voice control without an additional hub.
Hands-free voice control with Alexa for Lepro SW1 LED strip lights
Image: Demonstrates voice control functionality with Amazon Alexa for the LED strip lights.

Video: Instructions on how to connect Lepro AI lights to Alexa for voice control.

תַחזוּקָה

Proper maintenance ensures the longevity and performance of your Lepro SW1 LED Strip Lights.

  • ניקוי: Periodically wipe the strip lights with a soft, damp מטלית להסרת לכלוך ופסולת. הימנע משימוש בכימיקלים קשים או בחומרי ניקוי שוחקים.
  • בדוק חיבורים: Regularly check the power adapter, controller, and strip connections for any signs of wear, damage, or loose fittings. Ensure the power adapter remains protected in an electrical box.
  • הרכבה מאובטחת: Over time, environmental factors can affect mounting. Periodically check that all clips and screws are securely fastened and the strip is firmly in place.
  • עמידות בפני מזג אוויר: While the strip is IP65 waterproof, extreme weather conditions (e.g., heavy storms, prolonged freezing temperatures) can still impact performance. Ensure proper drainage around the installation area.
Lepro SW1 LED strip light built for outdoor use with IP65 rating
Image: Highlights the IP65 rating for the strip light, adapter, and controller, emphasizing outdoor durability.

פתרון בעיות

If you encounter issues with your Lepro SW1 LED Strip Lights, refer to the following common solutions.

בְּעָיָהסיבה אפשריתפִּתָרוֹן
אורות לא נדלקים.אין חשמל, חיבור רופף, מתאם/בקר פגום.Check power outlet. Ensure all connections are secure. Test the strip before installation.
Cannot connect to Lepro App.Incorrect Wi-Fi band, Bluetooth off, app not updated, incorrect pairing steps.Ensure phone is on 2.4GHz Wi-Fi (5GHz is not supported). Turn on Bluetooth. Follow app connection steps carefully. Restart app and lights.
בקרת קולית לא עובדת.Not linked to Alexa/Google Assistant, poor Wi-Fi signal, incorrect commands.Ensure Lepro app is linked to your Alexa/Google Home account. Check Wi-Fi signal strength. Use clear and correct voice commands.
אורות מהבהבים או מציגים צבעים שגויים.Loose connection, damaged strip, power supply issue.Check all connections. If a section is damaged, the strip cannot be repaired or cut. Ensure power adapter is functioning correctly.
Adhesive not holding.Surface not clean/dry, insufficient clips, extreme temperatures.Ensure surface is clean and dry. Use all provided clips and screws for secure mounting.

מפרטים

תכונהפְּרָט
מספר דגםSW1-10
מֶשֶׁך32.8 רגל (10 מטר)
סוג צבעRGBCW (אדום, ירוק, כחול, לבן קר, לבן חם)
טמפרטורת צבעלבן מתכוונן 2700K-5700K
דירוג עמיד למיםIP65 (Strip Light & Controller)
מקור כוחחשמלי עם כבלים
כרך ידtage36 וולט (DC)
מהtage24 וואט
שיטת בקרהApp Control (Lepro App)
פרוטוקול קישוריותWi-Fi (2.4GHz בלבד)
תאימות של עוזר קוליAmazon Alexa, Google Assistant
סוג חומרנחושת, פלסטיק
משקל פריט1.9 פאונד
מספר מקורות האור270
UPC810168792149

אחריות ותמיכה

Your Lepro SW1 AI Smart Outdoor LED Strip Lights come with a אחריות יצרן לשנה.

For technical support, warranty claims, or further assistance, please contact Lepro customer service through their official website or the contact information provided in the Lepro app.

אתה יכול גם לבקר ב חנות Lepro באמזון למידע נוסף על המוצר ומשאבי תמיכה.

© 2026 Lepro. כל הזכויות שמורות.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.