Qidoe 83W PD USB C Car Charger (Model: QD1009)

1. מבוא ומעבר למוצרview

Thank you for choosing the Qidoe 83W PD USB C Car Charger. This device is designed to provide efficient and versatile charging solutions for your electronic devices in a vehicle environment. Featuring a 65W Power Delivery (PD) USB-C port and an 18W Quick Charge 3.0 (QC3.0) USB-A port, it offers a combined output of up to 83W. The charger is compatible with 12V/24V vehicle power systems and includes an intuitive LED digital display for monitoring voltage and current, along with a physical on/off switch and a dustproof flip cover for enhanced durability.

תמונה 1.1: The Qidoe 83W PD USB C Car Charger in use, demonstrating its dual charging capabilities for a MacBook and an iPhone.

תמונה 1.2: מְפוֹרָט view of the charger's components, including the ports, digital display, and control switch.

2. התקנה והתקנה

This charger is designed for surface mounting, requiring minimal modification to your vehicle's interior. Follow these steps for proper installation:

1. הכן את משטח ההרכבה: Choose a flat, stable surface in your vehicle for installation.
2. פתח את המכסה: Carefully open the outer frame/cover of the charger unit.
3. Drill Wiring Holes: Drill a small hole (approximately 1.8 cm in diameter, refer to dimensions in Section 5) through the chosen mounting surface to pass the power cables. Ensure the hole is only large enough for the wires, not the entire unit.
4. חבר חיווט:
   • חבר את חוט אדום to the positive (+) terminal of your vehicle's 12V/24V power source.
   • חבר את חוט שחור to the negative (-) terminal or a suitable ground point.

   חָשׁוּב: Ensure correct polarity to prevent damage to the charger and your vehicle's electrical system. It is recommended to connect through a fuse (not included) for safety.
5. אבטח את היחידה: Place the main body of the charger onto the mounting surface, aligning the wiring through the drilled hole. Use the provided screws to firmly fix the unit to the surface.
6. סגור את המכסה: Reattach the outer frame/cover to the main unit. Ensure it snaps securely into place.

תמונה 2.1: מדריך שלב אחר שלב להתקנה על גבי משטח.

3. הוראות הפעלה

3.1 הפעלה/כיבוי

• The charger features a physical ON/OFF pressure switch. Press the switch to toggle the power to the USB ports and the digital display.
• When the charger is powered on, the LED digital display will illuminate.

תמונה 3.1: Demonstrating the ON/OFF function of the charger.

3.2 שימוש ביציאות הטעינה

• USB-C (PD 65W) Port: Connect your USB-C compatible laptops, tablets, or smartphones to this port for fast charging. The 65W PD3.0 port can boost voltage to 15V and 20V for optimal charging of larger devices.
• USB-A (QC3.0 18W) Port: Connect your Quick Charge 3.0 compatible devices or standard USB devices to this port for efficient charging.
• ניתן לטעון שני מכשירים בו זמנית באמצעות שני היציאות.

3.3 Digital Display Functionality

• סוללה כרךtagניטור אלקטרוני: In standby mode or when only the USB-A port is in use, the display shows the vehicle's battery voltage (V), allowing you to monitor its health.
• Real-time Charging Data: When a device is connected to the 65W USB-C port, the display automatically switches to show the real-time output voltage (V) and current (A) for the PD interface, providing immediate feedback on charging performance.

תמונה 3.2: The digital display showing vehicle battery voltage and real-time charging output for various devices.

4. תחזוקה

• ניקוי: השתמשו במטלית רכה ויבשה לניקוי פני השטח של המטען. הימנעו משימוש בחומרי ניקוי שוחקים או ממסים.
• כיסוי עמיד בפני אבק: Keep the flip cover closed when the ports are not in use to protect them from dust and moisture.
• תנאים סביבתיים: While designed for automotive use, avoid exposing the charger to extreme water or harsh weather conditions.
• בדיקת כבלים: Periodically check charging cables for any signs of wear or damage. Replace damaged cables immediately.

5. פתרון תקלות

• המטען לא נדלק:
  • Ensure the vehicle's ignition is on (if required by your vehicle's wiring).
  • Check the ON/OFF switch to ensure it is pressed to the 'ON' position.
  • Verify that the red and black wires are correctly connected to the positive and negative terminals, respectively.
  • Check the vehicle's fuse for the circuit the charger is connected to. Replace if blown.
• המכשיר לא נטען / טעינה איטית:
  • Ensure the charging cable is securely connected to both the charger and your device.
  • נסה כבל טעינה אחר כדי לשלול בעיות בכבל.
  • Confirm your device supports PD (for USB-C) or QC3.0 (for USB-A) for fast charging.
  • If charging multiple devices, note that total power output is shared.
  • Check the digital display for output voltage and current. If values are unexpectedly low, there might be an issue with the power source or the device being charged.
• לא מדויק כרךtagתצוגה אלקטרונית:
  • Ensure the charger is properly connected to a stable 12V/24V power source.
  • Fluctuations in vehicle battery voltage are normal, especially during engine start-up or heavy electrical load.

6. מפרטים

תמונה 6.1: Physical dimensions of the Qidoe 83W PD USB C Car Charger.

7. אחריות ותמיכה

The Qidoe 83W PD USB C Car Charger comes with a אחריות יצרן לשנה אחת.

For any questions, technical assistance, or warranty claims, please contact Qidoe customer service directly via email. Our support team is committed to providing a satisfactory resolution as quickly as possible.

מידע ליצירת קשר: Please refer to the contact details provided on the product packaging or the official Qidoe webאתר לקבלת מידע התמיכה העדכני ביותר.

8. תאימות רכב

This charger is designed to be compatible with a wide range of 12V-24V vehicles, including:

• מכוניות
• טנדרים
• קרוואנים
• משאיות
• אוטובוסים
• סירות
• אופנועים

תמונה 8.1: Examples of compatible vehicles for the Qidoe car charger.