FNIRSI FPM-02 Environmental Monitor User Manual

1. הקדמה

The FNIRSI FPM-02 is a high-precision 3-in-1 environmental monitor designed for measuring illuminance (lux), temperature, and humidity. It features a 2-inch color display for clear data visualization and is suitable for various professional applications including office lighting assessment, horticulture, laboratories, and photography studios.

2. מה בקופסה

• FNIRSI FPM-02 Environmental Monitor
• כבל USB
• תיק נשיאה
• מדריך למשתמש

3. תכונות עיקריות

• מדידה של 3 ב-1: Monitors Lux, temperature, and humidity simultaneously.
• מסך צבעוני בגודל 2 אינץ': High-definition display with light and dark theme modes for optimal readability.
• Real-time Data & Curve Recording: Visualizes environmental changes over time.
• Adjustable Alarm Thresholds: Alerts users when measurements exceed set values.
• מהיר שampשיעור ling: 20Hz (50ms) for real-time monitoring.
• Dual-language Interface: Supports English and Chinese.
• Built-in Sleep Mode & Data Logging: Enhances battery efficiency and usage tracking.

Figure 1: FNIRSI FPM-02 Environmental Monitor with key features highlighted on its color screen.

4. התקנה

4.1 טעינת המכשיר

1. Connect the provided USB cable to the FNIRSI FPM-02's charging port.
2. חבר את הקצה השני של כבל ה-USB לספק כוח USB סטנדרטי (לא כלול) או ליציאת ה-USB של מחשב.
3. The device will indicate charging status on its screen. A full charge typically takes approximately 2-3 hours.

4.2 הפעלה/כיבוי

• To power on: Press and hold the Power button (usually located on the side or front panel) until the screen illuminates.
• לכיבוי: לחץ והחזק את לחצן ההפעלה עד שהמכשיר יכבה.

5. הוראות הפעלה

5.1 ניווט בממשק

The FPM-02 features a user-friendly interface with a 2-inch HD color screen. Use the navigation buttons (up, down, left, right, OK/Enter) to move through menus and select options. The device supports both English and Chinese languages, which can be selected in the settings menu.

5.2 Taking Measurements (Illuminance, Temperature, Humidity)

Upon powering on, the device typically defaults to the main measurement screen, displaying real-time values for illuminance (Lux/FC), temperature (°C/°F), and relative humidity (%).

• הארה: Ensure the light sensor (located at the top of the device) is unobstructed and pointed towards the light source or area to be measured. The device will display the light intensity in LUX or FC.
• טמפרטורה ולחות: The internal sensors continuously monitor ambient temperature and humidity. Allow a few minutes for readings to stabilize after significant environmental changes.

5.3 Real-time Data and Curve Recording

The device can display real-time data and record changes over time, presenting them as a curve. Access this feature through the main menu to visualize trends and fluctuations in environmental conditions.

5.4 הגדרת ספי אזעקה

You can set custom alarm thresholds for Lux, temperature, and humidity. If a measured value exceeds or falls below the set threshold, the device will trigger an alert. Refer to the device's settings menu to configure these thresholds.

5.5 Sleep Mode and Data Logging

To conserve battery, the device features a configurable sleep mode. It also includes data logging capabilities, allowing you to store measurement data for later review and analysis. Consult the user manual for detailed instructions on activating and managing these functions.

6. תחזוקה

• ניקוי: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents. Ensure the light sensor and display are kept clean for accurate readings.
• אִחסוּן: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.
• טיפול בסוללה: Avoid fully discharging the lithium battery frequently. Recharge the device when the battery level is low.

7. פתרון תקלות

8. מפרט טכני

9. אחריות ותמיכה

This FNIRSI FPM-02 Environmental Monitor comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

לקבלת תמיכה טכנית, סיוע בפתרון בעיות או תביעות אחריות, אנא צרו קשר ישירות עם הקמעונאי או היצרן. שמרו את קבלת הרכישה כהוכחת קנייה.