Jonsbo N10 Mini-ITX PC Case User Manual

1. הקדמה

The Jonsbo N10 Mini-ITX PC Case is designed for users seeking a compact, functional, and elegantly designed enclosure for minimalist PC systems. It is suitable for space-saving office PCs, quiet HTPCs (Home Theater Personal Computers), or compact NAS (Network Attached Storage) systems. This manual provides essential information for the proper assembly, operation, and maintenance of your Jonsbo N10 case.

Figure 1: Jonsbo N10 Mini-ITX PC Case in a typical desktop setup.

2. מידע בטיחות

• יש לנתק תמיד את ספק הכוח משקע הקיר לפני התקנה או הסרה של רכיבים כלשהם.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• הרחיקו חלקים קטנים וברגים מהישג ידם של ילדים.
• ודא אוורור נאות סביב המארז כדי למנוע התחממות יתר.
• Do not attempt to modify the case or its components, as this may void your warranty and pose safety risks.

3. תכולת החבילה

אנא ודא שכל הפריטים הבאים כלולים בחבילה שלך:

• Jonsbo N10 Mini-ITX PC Case
• 2 x Pre-installed Cooling Fans
• Accessory box with screws and mounting hardware

איור 2: התפוצץ view showing the main components of the Jonsbo N10 case.

4. התקנה והתקנה

4.1 רכיב נגמרview

The Jonsbo N10 case is designed for Mini-ITX motherboards and compact components. Familiarize yourself with the internal layout before beginning assembly.

איור 3: פנימי view of the Jonsbo N10 case, illustrating component placement.

4.2 התקנת לוח אם

1. Remove the side panels of the case.
2. Install your Mini-ITX motherboard into the designated area. Ensure the I/O shield is properly seated.
3. אבטחו את לוח האם באמצעות הברגים המצורפים.
4. Install your CPU and CPU cooler. Note that the maximum CPU cooler height supported is 38 מ"מ. This case is optimized for CPUs with integrated graphics (iGPU) and does not support dedicated graphics cards.

4.3 התקנת אחסון

The Jonsbo N10 supports up to four 2.5-inch SSDs or HDDs.

1. Locate the 2.5-inch drive bays. These are typically found on a removable bracket or directly on the chassis.
2. Mount your 2.5-inch SSDs or HDDs onto the bracket using the provided screws.
3. Secure the bracket back into the case.

Figure 4: Installation process for 2.5-inch storage drives.

4.4 התקנת ספק כוח

The case supports 1U-Flex power supplies up to 150 mm in length.

1. Identify the power supply mounting area, typically at the bottom of the case.
2. Slide the 1U-Flex power supply into its designated slot.
3. אבטחו את ספק הכוח באמצעות ברגים מחלקו האחורי של המארז.
4. Connect the necessary power cables to your motherboard and storage devices.

Figure 5: Power supply unit installation guide.

4.5 Fan Connections

The Jonsbo N10 comes with two pre-installed cooling fans. Connect their power cables to the appropriate fan headers on your motherboard.

4.6 ניהול כבלים

Due to the compact nature of the case, careful cable management is crucial for optimal airflow and aesthetics. Route cables neatly using zip ties or Velcro straps where possible.

5. הוראות הפעלה

Once all components are installed and secured, and all cables are connected:

1. Replace the side panels and secure them.
2. Connect your monitor, keyboard, mouse, and other peripherals.
3. Connect the power cable to the power supply and then to a wall outlet.
4. Press the power button on the front of the case to start your system.

איור 6: למעלה view of the Jonsbo N10, highlighting the power button and front panel.

6. תחזוקה

• ניקוי: Regularly clean the exterior of the case with a soft, dry cloth. For dust accumulation inside, use compressed air to gently clear vents and components. Ensure the system is powered off and unplugged before cleaning.
• בדיקת מאוורר: Periodically check the pre-installed fans for dust buildup or unusual noises. Clean them as needed to maintain optimal airflow.
• אוורור: Ensure that the case's ventilation holes are not obstructed to allow for proper heat dissipation.

7. פתרון תקלות

• המערכת לא נדלקת: Double-check all power connections, including the power supply to the wall, the motherboard 24-pin connector, and the CPU power connector. Ensure the power button cable is correctly connected to the motherboard.
• רעש מוגזם של המאוורר: While the case includes pre-installed fans, some users may find them audible. If fan noise is a concern, consider replacing the pre-installed fans with quieter aftermarket alternatives (e.g., Noctua fans). Ensure fans are free of dust and properly secured.
• התחממות יתר: Verify that all fans are spinning correctly and that the case's ventilation is unobstructed. Ensure your CPU cooler is properly seated and making good contact with the CPU.
• יציאות USB לא עובדות: Check the internal USB 3.0 header connection from the front panel to the motherboard.

8. מפרטים

9. אחריות ותמיכה

The Jonsbo N10 PC Case comes with a 2 שנות אחריות למוצר. For technical support, warranty claims, or further assistance, please contact your retailer or visit the official Jonsbo webאתר. אנא שמור את הוכחת הרכישה שלך לצורכי אחריות.