SMALLRIG Push-Button Rotating Side Handle with NATO Clamp

מָבוֹא

This manual provides instructions for the proper setup, operation, and maintenance of your SMALLRIG Push-Button Rotating Side Handle with NATO Clamp. This accessory is designed to enhance handheld camera operation by providing a comfortable and versatile grip solution for camera cages and mounting plates equipped with NATO rails.

מה יש בקופסה

• Side Handle x 1
• NATO Rail x 1
• מפתח ברגים x 1

תכונות מפתח

• עיצוב מסתובב: Features a push-button mechanism for 360° rotation, allowing for quick and smooth angle adjustments.
• תאימות אוניברסלית: Designed for both left and right-hand use, attaching to camera/monitor cages and mounting plates with NATO rails.
• קיבולת עומס גבוהה: Supports a maximum load of 15kg (33lb), ensuring stability for various camera setups.
• אחיזה ארגונומית: Constructed with anti-slip silicone for a comfortable and secure hold, even in varying conditions.
• נקודות הרכבה מרובות: Includes 1/4"-20 locating holes and a cold shoe mount for attaching accessories like remote controllers, magic arms, monitors, microphones, and video lights.

הוראות התקנה

1. Attach NATO Rail (if necessary): If your camera cage or mounting plate does not have a built-in NATO rail, use the included NATO rail and Allen wrench to securely attach it to your desired position on the cage. Ensure it is tightened firmly to prevent movement.
2. Mount the Side Handle: יישר את גבולות נאט"וamp on the side handle with the NATO rail on your camera setup. Slide the handle onto the rail.
3. אבטח את הידית: הדקו את כפתור הנעילה על מנעול הנאט"ו.amp to firmly secure the side handle in place. Verify that the handle is stable and does not wobble.

הוראות הפעלה

סיבוב של 360 מעלות

The side handle features a push-button mechanism for quick angle adjustments. To rotate the handle:

1. Locate the unlock button on the handle.
2. לחץ והחזק את לחצן ביטול הנעילה.
3. While holding the button, rotate the handle to your desired angle (up to 360°).
4. Release the button to lock the handle in the new position.

אמצעי בטיחות חשוב: When adjusting the angle, always hold the camera or rig securely with your other hand to prevent accidental drops or damage.

הצמדת אביזרים

The handle provides various mounting points for additional accessories:

• 1/4"-20 Locating Holes: Use these threaded holes to attach remote controllers, magic arms, or other accessories with 1/4"-20 screws.
• מתקן לנעליים קרות: The integrated cold shoe mount allows for direct attachment of accessories such as monitor mounts, microphones, or video lights.

תַחזוּקָה

• Regularly inspect all screws and connections to ensure they are tight. Use the included Allen wrench for tightening if necessary.
• Clean the handle and NATO rail with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish or silicone grip.
• Store the handle in a dry, dust-free environment when not in use.

פתרון בעיות

Handle is loose or wobbly after attachment

Ensure the locking knob on the NATO clamp is fully tightened. If the issue persists, check if the NATO rail itself is securely attached to your camera cage. Re-tighten any loose screws using the Allen wrench.

Rotation mechanism feels stiff or does not lock properly

Ensure the unlock button is fully depressed when attempting to rotate. If the mechanism feels stiff, check for any debris or obstructions around the rotating joint. Avoid forcing the rotation; if resistance is significant, contact customer support.

מפרטים

אחריות ותמיכה

מידע על אחריות

This SMALLRIG product is covered by a 2 שנות אחריות יצרן ממועד הרכישה. אחריות זו מכסה פגמים בחומרים ובביצוע בשימוש רגיל. היא אינה מכסה נזק שנגרם כתוצאה משימוש לרעה, תאונה, שינוי לא מורשה או התקנה לא נכונה.

תמיכת לקוחות

For technical assistance, warranty claims, or product inquiries, please contact SMALLRIG customer support through their official website or the retailer where the product was purchased. Please have your product model number (12669) and proof of purchase ready when contacting support.