1. הקדמה
This manual provides detailed instructions for the installation, operation, and maintenance of the YUHANUS Smart Door Access Control System. This kit is designed to provide secure and convenient access management for outswinging doors, integrating a 600lbs magnetic lock with Tuya App and remote control capabilities.
2. תכולת החבילה
ודא שכל הרכיבים המפורטים להלן כלולים בחבילה שלך:
- 600lbs Magnetic Lock with Built-in Alarm Beeper
- Power Supply Controller (Model: SP1203)
- 2 שלט רחוק
- Stainless Steel Exit Button
- מחבר תקע חשמל
- Mounting Hardware (screws, washers, L-bracket, Z-bracket)
תמונה 2.1: נגמרview of the YUHANUS Smart Door Access Control System kit components.
3. מפרט מוצר
| תכונה | מִפרָט |
|---|---|
| כוח החזקת מנעול מגנטי | 600 פאונד |
| כניסת אספקת חשמל | AC 100-240V |
| פלט אספקת חשמל | DC 12V / 3A |
| Timer Adjustment (Power Supply) | 0-15 שניות |
| תדר שלט רחוק | 433 מגה-הרץ |
| Max Remote Controllers Supported | 30 יחידות |
| Door Type Compatibility | Outswinging doors |
| Alarm Beeper | Integrated in magnetic lock |
| בקרת אפליקציה | אפליקציית Tuya |
4. מדריך התקנה
4.1 אמצעי זהירות
- Ensure power is disconnected before beginning any installation or wiring.
- התייעץ עם חשמלאי מוסמך אם אינך בטוח לגבי הליכי חיווט כלשהם.
- ללבוש ציוד בטיחות מתאים במהלך ההתקנה.
4.2 Magnetic Lock Installation (Outswinging Door)
For outswinging doors, the magnetic lock body is typically mounted on the door frame, and the armature plate is mounted on the door. Z and L brackets are required for proper alignment.
- Mount the L-Bracket: Secure the L-bracket to the door frame using the provided screws. Ensure it is level and positioned correctly for the magnetic lock body.
- Mount the Magnetic Lock Body: Attach the magnetic lock body to the L-bracket.
- Mount the Z-Bracket: Assemble the Z-bracket components and attach them to the door. The Z-bracket allows the armature plate to align with the magnetic lock body.
- Attach the Armature Plate: Secure the armature plate to the Z-bracket. Ensure the armature plate can pivot slightly to allow for full contact with the magnetic lock face.
- התאם יישור: Close the door and adjust the position of the magnetic lock and armature plate to ensure full contact and secure locking.
Image 4.1: Z and L brackets used for mounting the magnetic lock on outswinging doors.
Image 4.2: The 600lbs magnetic lock and its corresponding armature plate.
4.3 התקנת לחצן יציאה
Mount the stainless steel exit button in a convenient location near the door on the secure side. Ensure it is easily accessible for exiting personnel.
Image 4.3: The stainless steel push-to-exit button.
4.4 Power Supply Controller Installation
Mount the power supply controller in a secure, dry location, preferably near the door frame but out of direct reach. Ensure proper ventilation.
Image 4.4: The SP1203 power supply controller.
4.5 תרשים חיווט
Follow the wiring diagram carefully to connect all components. Incorrect wiring can damage the system or pose a safety risk.
Image 4.5: Detailed wiring diagram for connecting the magnetic lock, exit button, and power supply.
- Connect the magnetic lock to the NC (Normally Closed) and COM (Common) terminals on the power supply.
- Connect the exit button to the לִדחוֹף ו GND (Ground) terminals on the power supply.
- Connect the AC power cable to the N (Neutral) and L (Live) terminals on the power supply.
- ודא שכל החיבורים מאובטחים ומבודדים.
5. הוראות הפעלה
5.1 תפעול כללי
Once installed and powered, the magnetic lock will engage, securing the door. To unlock the door:
- מבפנים: Press the stainless steel exit button. The lock will disengage for the set duration (0-15 seconds), allowing the door to open.
- From Outside (Remote): Press the unlock button on the remote controller. The lock will disengage.
- From Outside (Tuya App): Use the Tuya App on your smartphone to remotely unlock the door.
5.2 Tuya App Integration
The power supply controller is compatible with the Tuya Smart App for remote access control.
- הורד אפליקציה: הורידו את אפליקציית Tuya Smart מחנות האפליקציות של הסמארטפון שלכם.
- הרשמה/התחברות: Create an account or log in to your existing Tuya account.
- הוסף מכשיר: Follow the in-app instructions to add a new device. The power supply controller should be discoverable when in pairing mode. Refer to the power supply manual for specific pairing mode activation.
- ביטול נעילה מרחוק: Once connected, you can use the app to remotely unlock the door from anywhere with an internet connection.
5.3 זיווג שלט רחוק
The kit includes two pre-paired remote controllers. If you need to add more remotes (up to 30 total) or re-pair existing ones:
- היכנסו למצב התאמה: Locate the pairing button or switch on the power supply controller (refer to the power supply diagram for '433 SET'). Press and hold it until an indicator light or sound confirms pairing mode.
- לחץ על כפתור השלט הרחוק: While the power supply is in pairing mode, press any button on the remote controller you wish to pair.
- אִשׁוּר: The power supply will indicate successful pairing (e.g., a beep or light change).
- צא ממצב צימוד: The pairing mode will typically time out automatically or can be exited by pressing the pairing button again.
Image 5.1: One of the remote controllers for the access system.
6. תחזוקה
Regular maintenance ensures optimal performance and longevity of your access control system.
- Clean Magnetic Lock: Periodically clean the face of the magnetic lock and the armature plate with a soft, dry cloth to ensure full contact and prevent debris buildup.
- בדוק חיווט: Inspect all wiring connections annually for any signs of wear, corrosion, or loose terminals. Tighten as necessary.
- פונקציונליות בדיקה: Regularly test the exit button, remote controls, and Tuya App functionality to ensure the system is operating correctly.
- עדכוני תוכנה: Keep the Tuya Smart App updated to the latest version for optimal performance and security.
7. פתרון תקלות
עיין בטבלה שלהלן לקבלת בעיות נפוצות ופתרונותיהן.
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| Magnetic lock does not engage. | No power; loose wiring; faulty lock. | Check power supply connection; verify all wiring according to diagram; test lock with direct 12V power. |
| הדלת לא נפתחת עם כפתור יציאה. | Exit button wiring issue; faulty button. | Check exit button wiring to PUSH and GND terminals; test button continuity. |
| Remote control does not unlock door. | Remote not paired; remote battery low; interference. | Re-pair remote control (Section 5.3); replace remote battery; check for signal interference. |
| Tuya App cannot control the lock. | No internet connection; app not paired; power supply offline. | Ensure stable Wi-Fi connection; re-pair device in Tuya App; check power supply status. |
| Alarm beeper activates unexpectedly. | Door not fully closed/secured; sensor malfunction. | Ensure door is fully closed and armature plate makes full contact; inspect lock for damage. |
8. מידע בטיחות
- This system is designed for low-voltage applications. Do not connect directly to high voltage without the power supply controller.
- Ensure all wiring is done according to local electrical codes and standards.
- Keep the power supply and magnetic lock away from water and excessive moisture.
- Do not attempt to modify or repair the components yourself. Contact support for assistance.
9. אחריות ותמיכה
This product comes with a standard manufacturer's warranty. For specific warranty terms, please refer to the product packaging or contact the seller directly. For technical support, troubleshooting assistance, or replacement parts, please contact YUHANUS customer service through the platform of purchase.