DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. הקדמה

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. תכונות עיקריות

• Extensive Storage Support: Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ampמקום לאחסון נתונים.
• הרכבה אנכית של GPU: Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• תאימות לוח אם: Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• תמיכה בקירור מתקדמת: Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• זרימת אוויר אופטימלית: Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• קישוריות בלוח הקדמי: Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. מפרטים

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. מדריך התקנה

4.1. הכנת התיק

1. פתחו את המארז: Carefully remove the computer case from its packaging.
2. הסר לוחות צד: Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. בדוק אביזרים: Verify all included accessories (screws, cable ties, manual) are present.

4.2. התקנת לוח אם

1. התקן יציאות: Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. התקנת מגן קלט/פלט: Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. הרכבת לוח אם: Carefully align your motherboard with the standoffs and I/O shield. Secure it with the provided screws.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Drive Installation (HDD/SSD)

• התקנת כונן קשיח 3.5 אינץ': The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• התקנת SSD בגודל 2.5 אינץ': The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. התקנת כרטיס מסך (GPU)

• התקנה רגילה: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• התקנה אנכית: The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. התקנת מערכת קירור

• מאווררים מותקנים מראש: The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. ניהול כבלים

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

תמונה: פיצוץ view of the case showing removable panels and internal structure.

תמונה: פנים אחורי view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. הוראות הפעלה

• הפעלה/כיבוי: Use the power button located on the top front panel to turn the system on or off.
• לחצן איפוס: The reset button is also on the top front panel for system restarts.
• יציאות בלוח הקדמי: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. תחזוקה

• ניקוי מסנן אבק: The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• ניקיון פנימי: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. פתרון תקלות

• המערכת לא נדלקת:
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • בדוק את כל חיבורי החשמל הפנימיים (ATX בעל 24 פינים, חשמל למעבד, חשמל לכרטיס גרפי).
  • Verify front panel power button cables are correctly connected to the motherboard.
• אין פלט תצוגה:
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • התקן מחדש את כרטיס המסך ואת מודולי ה-RAM.
• בעיות התחממות יתר:
  • Ensure all case fans are spinning and connected correctly.
  • נקו את מסנני האבק והרכיבים הפנימיים.
  • Verify CPU cooler is properly seated and making good contact with the CPU.
• כונן לא זוהה:
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. אחריות ותמיכה

The DARKROCK Classico Max computer case comes with a אחריות לשנה מתאריך הרכישה. אחריות זו מכסה פגמי ייצור ופגמים בחומר בשימוש רגיל.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webאתר או צרו קשר עם מחלקת שירות הלקוחות שלהם. שמרו את הוכחת הרכישה שלכם לצורך אימות האחריות.

Official DARKROCK Store: DARKROCK Amazon Store

9. גלריית מדיה

תמונה: חזית view of the DARKROCK Classico Max computer case.

תמונה: פנימי view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

תמונה: פיצוץ view of the case showing removable panels and internal structure.

תמונה: פנים אחורי view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

סרטונים