Stemedu BLS-HV70MG 70KG Brushless Digital RC Servo Instruction Manual

מָבוֹא

This manual provides detailed instructions for the installation, operation, and maintenance of your Stemedu BLS-HV70MG 70KG Brushless Digital RC Servo. This high-performance servo is designed for 1:8 and 1:10 scale RC cars, offering high torque, speed, and durability. It features a brushless motor, all-metal gears, and an IP67 waterproof rating, ensuring reliable operation in various conditions.

תכונות המוצר

• 70KG Brushless Servo: כרך הפעלה גבוהtage מ-4.8V עד 8.4V DC.
• מהירות גבוהה: No-load speed of 0.12sec/60° at 8.4V.
• מומנט גבוה: Stall torque of 71 Kg-cm at 8.4V.
• ביצועים עמידים למים: IP67 rated for reliable use in wet conditions.
• בנייה מתכתית: Full aluminum case, stainless steel metal gears for precision, reduced noise, and high operating accuracy.
• זווית בקרה: Controllable angle range from 0 to 180 degrees.

מה יש בקופסה

החבילה כוללת את הרכיבים הבאים:

• 1 x Stemedu BLS-HV70MG 70KG Brushless Digital RC Servo
• Multiple plastic servo arms (various shapes)
• 1 x 25T metal servo horn
• Mounting screws and brass inserts

Image: The BLS-HV70MG servo shown with its complete set of accessories, including various plastic servo arms, a red metal 25T servo horn, mounting screws, and brass inserts.

הוראות התקנה

1. הרכבת הסרוו: Securely mount the servo into your RC vehicle's servo tray using the provided screws and brass inserts. Ensure the servo is firmly seated to prevent movement during operation.
2. Connecting to Receiver/BEC: Connect the servo's 3-pin connector to the appropriate channel on your RC receiver. If using a separate Battery Eliminator Circuit (BEC), ensure it is properly connected and configured to supply the recommended voltage range (4.8V-8.4V) to the servo.
3. Attaching Servo Horn: With the RC system powered on and the servo centered (usually by turning on the transmitter and receiver first), attach the desired servo horn to the servo output shaft. Ensure the horn is aligned correctly for your application. The included 25T metal servo horn is recommended for high-stress applications.
4. כיול ראשוני: Before full operation, perform a basic calibration to ensure the servo responds correctly to your transmitter inputs. Check for full range of motion and proper centering.

תמונה: מפורט view of the Stemedu BLS-HV70MG servo, showing its compact design and wiring for connection.

הוראות הפעלה

The BLS-HV70MG servo operates with a control angle of 180 degrees, responding to standard PWM signals. The pulse width range for control is typically from 500 to 2500 microseconds, with 1500 microseconds representing the neutral position.

• כרך ידtagטווח e: This servo is designed for high voltage (HV) operation, accepting inputs from 4.8V to 8.4V. Operating within this range ensures optimal performance and longevity.
• Speed and Torque: The servo's speed and torque vary with the input voltagה. כרך גבוה יותרtages (e.g., 8.4V) will result in faster speeds (0.12sec/60°) and higher torque (71 Kg-cm).
• לִשְׁלוֹט: Use your RC transmitter to send control signals to the servo. Adjust the trim and sub-trim settings on your transmitter for precise centering and endpoint adjustments.

Image: A visual representation of the servo's 180-degree control angle, indicating the pulse width modulation (PWM) values corresponding to different positions.

תַחזוּקָה

Proper maintenance ensures the longevity and optimal performance of your servo.

• איטום מים: The servo has an IP67 waterproof rating. While it can withstand splashes and temporary immersion, avoid prolonged submersion or high-pressure water jets. After exposure to water, allow the servo to dry completely before storage.
• בדיקת ציוד: Periodically inspect the metal gears for any signs of wear, damage, or debris. Clean any accumulated dirt or grime.
• ניקוי: Use a soft, dry cloth to clean the exterior of the servo. Avoid using harsh chemicals or solvents.
• אִחסוּן: Store the servo in a dry, cool place away from direct sunlight and extreme temperatures.

Image: The BLS-HV70MG servo is shown amidst splashing water, illustrating its IP67 waterproof design, which protects it from dust and water ingress.

פתרון בעיות

• סרוו לא מגיב:
  • Check all connections between the servo, receiver, and power source.
  • Ensure the receiver and transmitter are properly bound and powered on.
  • ודא את כרך אספקת החשמלtage is within the servo's operating range (4.8V-8.4V).
• Inconsistent Centering:
  • Adjust the sub-trim on your transmitter.
  • Check for any mechanical binding or obstruction in the linkage.
  • Ensure the servo horn is securely attached and not stripped.
• Excessive Noise or Grinding:
  • Inspect the gears for damage or foreign objects.
  • Ensure the servo is not under excessive load or binding.
• התחממות יתר:
  • Reduce the load on the servo if possible.
  • ודא אוורור נאות סביב הסרוו.
  • ודא את כרך הקלטtage אינו גבוה מדי.

מפרטים

Image: A table presenting the comprehensive specifications of the BLS-HV70MG servo, detailing its performance characteristics under different voltagהתנאים.

Image: A technical diagram illustrating the exact dimensions of the BLS-HV70MG servo in millimeters, useful for fitment and installation.

Image: The BLS-HV70MG servo on a digital scale, showing its weight of 92.2 grams, indicating its robust yet lightweight construction.

אחריות ותמיכה

Stemedu products are manufactured to high-quality standards. For any issues or questions regarding your BLS-HV70MG servo, please refer to the seller's return policy or contact Stemedu customer support through the platform where the product was purchased. Please retain your proof of purchase for warranty claims.