Pro-Ject Debut EVO 2 Turntable Instruction Manual

1. הקדמה

Thank you for choosing the Pro-Ject Debut EVO 2 Turntable. This high-fidelity record player is crafted in Europe by hand, offering an enhanced listening experience. It features a heavy platter, a carbon fiber tonearm with a resonance-damping aluminum bearing block, and an adaptive anti-skating system. The turntable comes pre-mounted with a Pick it MM EVO Moving Magnet Phono Cartridge and includes a DC/AC power generator. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity.

2. תכולת החבילה

אנא ודאו שכל הפריטים הבאים כלולים בחבילה שלכם:

• Pro-Ject Debut EVO 2 Turntable Unit
• Pick it MM EVO Moving Magnet Phono Cartridge (pre-mounted)
• 15V DC 0.8A Power Supply
• כיסוי אבק
• 7'' Singles Adapter
• חגורת בטיחות
• משקל נגד
• משקל נגד החלקה

3. הוראות התקנה

Follow these steps carefully to set up your Pro-Ject Debut EVO 2 Turntable.

3.1 פריקה ומיקום

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and vibrations.

3.2 Platter and Drive Belt Installation

1. Place the main platter onto the central spindle.
2. Carefully loop the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.

3.3 התקנת זרוע הטון והמחסנית

1. Slide the counterweight onto the rear of the tonearm with the numbers facing forward.
2. The Pick it MM EVO cartridge is pre-mounted on the headshell. Attach the headshell to the tonearm and tighten the locking nut securely.
3. הסר בזהירות את מגן הסטיילוס מהמחסנית.
4. Unlock the tonearm from its rest. Lift the cueing lever.
5. While holding the headshell, lower the cueing lever completely. Do not let the stylus touch the platter.
6. Turn the counterweight until the tonearm floats parallel to the platter. This is the balanced position.
7. Once balanced, return the tonearm to its rest and lock it.
8. Turn only the numbered ring of the counterweight to '0' on the center line. Do not turn the entire counterweight.
9. Now, turn the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is set (e.g., 2 grams for the Pick it MM EVO cartridge).
10. Locate the anti-skating dial near the tonearm base. Set this dial to the same value as your tracking force (e.g., '2').

3.4 Dust Cover and Connections

1. Attach the dust cover hinges to the turntable chassis and then carefully place the dust cover onto the hinges.
2. Connect the turntable's RCA output cables to your amplifier's phono input (or a separate phono preampחיים יותר).
3. Connect the ground wire from the turntable to your ampמסוף הקרקע של המפיץ.
4. Plug the 15V DC 0.8A power supply into the turntable and then into a wall outlet.

3.5 Setup Video

For a visual guide on the initial setup, please watch the following video:

4. הוראות הפעלה

4.1 השמעת תקליט

1. מניחים תקליט על המגש.
2. Select the correct playback speed (33 or 45 RPM) using the speed selector switch.
3. Unlock the tonearm and lift it using the cueing lever.
4. Carefully position the stylus over the desired groove on the record.
5. Gently lower the cueing lever to allow the stylus to descend onto the record.

4.2 עצירת ההפעלה

1. הרם את זרוע הטונוס באמצעות ידית הרדיו.
2. Return the tonearm to its rest and lock it in place.
3. הוציאו את התקליט מהמגש.
4. Turn off the turntable using the power switch.

5. תחזוקה

5.1 ניקוי הסטיילוס

Use a soft stylus brush to gently clean the stylus from back to front. Never brush from front to back, as this can damage the stylus.

5.2 ניקוי הפטיפון

Wipe the dust cover and plinth with a soft, dry, anti-static cloth. Avoid using abrasive cleaners or solvents.

5.3 Drive Belt Inspection

Periodically inspect the drive belt for any signs of wear or stretching. A worn belt can affect playback speed and consistency.

6. פתרון תקלות

If you encounter any issues with your turntable, please refer to the following common solutions:

• אין צליל: Check all cable connections (RCA, ground, power). Ensure your amplifier is set to the correct input and volume.
• סאונד מעוות: Verify that the tracking force and anti-skating settings are correct. Ensure the stylus is clean and undamaged.
• מהירות שגויה: Confirm the drive belt is properly seated and not worn. Ensure the correct speed (33/45 RPM) is selected.
• רעש זמזום: Check the ground wire connection. Ensure the turntable is placed away from electronic devices that may cause interference.

If problems persist, please contact Pro-Ject customer support.

7. מפרטים

8. אחריות ותמיכה

For warranty information and technical support, please refer to the documentation included with your product or visit the official Pro-Ject Audio Systems webאתר. שמור את הוכחת הרכישה שלך עבור כל תביעת אחריות.