מדריך למשתמש של צג תינוקות עם וידאו Simyke BME28-RX

מָבוֹא

Thank you for choosing the Simyke BME28-RX Video Baby Monitor Add-on Display. This unit is designed to expand your existing Simyke BME28 or BMS28 series baby monitor system, allowing you to view your baby from multiple locations or replace a lost/damaged parent unit. It features a high-quality IPS screen for clear visuals and a long-lasting battery for extended use. Please read this manual carefully before use to ensure proper operation and safety.

מידע בטיחות

• Keep the monitor unit and power adapter out of reach of children.
• Do not place the monitor unit near water or heat sources.
• Use only the provided power adapter. Using unauthorized adapters may damage the unit and void the warranty.
• Avoid dropping or subjecting the unit to severe impact.
• אל תנסה לפרק או לתקן את היחידה בעצמך. צור קשר עם תמיכת הלקוחות לקבלת סיוע.
• יש לוודא אוורור נאות סביב היחידה במהלך הפעולה.

מה יש בקופסה

• 1x Simyke BME28-RX Baby Monitor (Display Only)
• 1x מתאם חשמל
• 1x מדריך למשתמש

המוצר נגמרview

איור 1: חֲזִית view of the Simyke BME28-RX display unit, featuring the IPS screen and navigation buttons.

איור 2: The display unit with its screen active, showing a live feed and various status indicators like signal strength and temperature.

איור 3: אֲחוֹרִי view of the display unit, highlighting the integrated speaker and the foldable kickstand for tabletop placement.

Display Unit Components

• מסך IPS: High-resolution display for clear video feed.
• לחצני ניווט: Up, Down, Left, Right, OK for menu navigation.
• לחצן הפעלה: לחץ והחזק להפעלה/כיבוי.
• לחצן מיקרופון: Press to activate two-way audio.
• רַמקוֹל: עבור שמע דו-כיווני והתראות.
• יציאת טעינה: לחיבור מתאם החשמל.
• דוכן: למיקום שולחן.

הגדרה

1. טעינת יחידת התצוגה

Before first use, fully charge the display unit. Connect the provided power adapter to the charging port on the side of the display unit and plug it into a power outlet. The charging indicator light will illuminate. A full charge typically takes approximately 3-4 hours.

2. Pairing with a Camera Unit

This display unit is an add-on and must be paired with a compatible Simyke BME28 or BMS28 series camera unit. If your camera is already paired with another display, you can add this new display. Refer to your original camera unit's manual for specific pairing instructions. Generally, the steps involve:

1. Turn on both the display unit and the camera unit.
2. Access the 'Camera Pairing' or 'Add Camera' option in the display unit's menu.
3. Press the pairing button on the camera unit (location varies by model, usually on the back or bottom).
4. The display unit will search for and connect to the camera. Once connected, the camera's video feed will appear on the screen.

הוראות הפעלה

הפעלה/כיבוי

• To turn on: Press and hold the Power button (⑂) until the screen illuminates.
• To turn off: Press and hold the Power button (⑂) until the screen goes blank.

פונקציות בסיסיות

• בקרת עוצמת הקול: Use the Up/Down navigation buttons to adjust the speaker volume.
• בקרת בהירות: Navigate to the 'Settings' menu and select 'Brightness' to adjust screen illumination.
• תפריט ניווט: Use the Up/Down/Left/Right navigation buttons to move through menu options. Press the OK button to confirm a selection.

תכונות מפתח

איור 4: Two-Way Audio feature, allowing communication with your baby.

איור 5: VOX Mode and Temperature Monitoring capabilities.

איור 6: Day and Night monitoring, ensuring visibility in all lighting conditions.

• שמע דו כיווני: Press and hold the Microphone button (🎤) to speak through the camera unit to your baby. Release the button to hear your baby.
• מצב VOX (מרכז הפעלה קולית): This mode conserves battery by turning off the screen when no sound is detected from the baby's room. The screen will automatically light up when sound is detected. Enable/disable VOX mode in the 'Settings' menu.
• ניטור טמפרטורה: The display unit shows the real-time temperature of the baby's room, as detected by the camera unit. Set temperature alerts in the 'Settings' menu.
• מצלמה מרובת View: אם יש לך מספר מצלמות משויכות, תוכל לעבור ביניהן views or enable a scan mode to cycle through them automatically. This feature supports up to 4 cameras.
• ראיית לילה אינפרא אדום: The camera unit automatically switches to infrared night vision in low-light conditions, providing a clear black-and-white image on the display unit.

תַחזוּקָה

• ניקוי: Use a soft, dry cloth to clean the display unit. Do not use abrasive cleaners or solvents.
• אִחסוּן: If storing the unit for an extended period, ensure it is fully charged and then store it in a cool, dry place. Recharge the battery every few months to maintain its health.
• טיפול בסוללה: כדי להאריך את חיי הסוללה, הימנעו מפריקת הסוללה לחלוטין לעתים קרובות.

פתרון בעיות

מפרטים

אחריות ותמיכה

Simyke products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your original baby monitor system or visit the official Simyke website. If you encounter any issues not covered in this manual, please contact Simyke customer service for assistance.

יַצרָן: Guangdong Envision Technology Limited

ארץ מוצא: סִין