MAONO BA37

MAONO BA37 Microphone Boom Arm User Manual

דגם: BA37

מותג: MAONO

1. הקדמה

This manual provides detailed instructions for the setup, operation, and maintenance of your MAONO BA37 Heavy Duty Adjustable Metal Suspension Microphone Boom Arm. Please read this manual thoroughly before use to ensure proper installation and optimal performance.

User operating the MAONO BA37 Microphone Boom Arm with a microphone attached, positioned comfortably for recording.

Image 1.1: User operating the MAONO BA37 Microphone Boom Arm.

2. מידע בטיחות

  • ודא שהשולחן clamp is securely fastened to a stable surface before attaching the boom arm and microphone.
  • Do not exceed the maximum weight recommendation of 5.5 pounds (2.5 kg) for attached equipment.
  • הימנעו מצביטה של ​​אצבעות או כבלים במפרקי הזרוע במהלך הכוונון.
  • Keep the boom arm away from heat sources and direct sunlight.

3. תכולת החבילה

ודא שכל הפריטים נמצאים בחבילה שלך:

  • Heavy-duty microphone scissor arm stand x1
  • Upgraded table mounting clamp x1
  • 3/8" to 5/8" screw adapter x1
  • רצועות כבלים x2

4. מדריך התקנה

4.1. Installing the Desk Clamp

  1. Choose a stable desktop surface with a thickness up to 2.36 inches (6.5 cm).
  2. Place the upgraded table mounting clamp על קצה שולחנך.
  3. Tighten the screw mechanism until the clamp is firmly secured. The clamp features a 4200mm² surface area and a silicone pad to protect your desk from scratches.
  4. ה- clamp also includes a convenient headset hook for storage.
Close-up of the MAONO BA37 desk clamp showing its large surface area (42CM²) compared to others (12CM²) and its ability to support desktops up to 2.36 inches thick, with an integrated headphone hook.

Image 4.1: Desk Clamp Installation and Features.

4.2. Attaching the Boom Arm

  1. Insert the base of the microphone scissor arm stand into the hole on the top of the desk clamp.
  2. Ensure the arm is seated properly and tighten any locking mechanisms on the clamp to secure the arm.

4.3. חיבור המיקרופון

  1. If your microphone has a 3/8" thread, use the provided 3/8" to 5/8" screw adapter if your microphone requires a 5/8" thread.
  2. Screw your microphone or shock mount onto the threaded end of the boom arm.
  3. Ensure the microphone is securely fastened.

Video 4.2: Official MAONO video demonstrating the installation and secure positioning of the BA37 Microphone Boom Arm.

4.4. ניהול כבלים

Use the included cable straps to neatly route your microphone cable along the boom arm, preventing tangles and maintaining a clean setup.

5. הוראות הפעלה

5.1. כוונון זרוע הבום

The MAONO BA37 boom arm features 5 adjustable nodes, allowing for flexible positioning. It offers a horizontal reach of 27.6 inches (70 cm) and a vertical reach of 29.6 inches (75 cm). Adjust the arm to your desired height and angle for optimal microphone placement.

Diagram showing the MAONO BA37 boom arm's adjustable nodes, horizontal reach of 35cm/13.8inch, and vertical reach of 35cm/13.8inch, with rotation angles of 360°, 120°, 225°, and 270° for easy adjustment and precision positioning.

Image 5.1: Flexible Adjustment and Positioning.

5.2. Load Capacity and Stability

The boom arm is constructed from thicker metal, enhancing stability and boasting an impressive load capacity of 4.8 lbs (2.2 kg). Its internal springs ensure silent operation, crucial for professional recording environments.

The MAONO BA37 boom arm shown holding a weight of 2.2kg / 4.8LB, illustrating its enhanced load-bearing capacity and secure microphone support.

Image 5.2: Enhanced Load-bearing Capacity.

5.3. Microphone Compatibility

The MAONO BA37 is compatible with a wide range of microphones and shock mounts, including MAONO PD100X, PD200X, PM450, PD400, PM500, Fifine AM8, AmpliGame (A6V, A8), HyperX QuadCast, HyperX Solocast, Shure MV7, Shure SM58, Shure SM7B, AT2020, AT2035, and others.

Image displaying the MAONO BA37 boom arm with various compatible microphones from MAONO (PD400X, PM450, PD200X, PD100X, DGM20S, DM50, A04) and a 3/8 to 5/8 screw adapter, highlighting its broad compatibility.

Image 5.3: Compatibility List for MAONO BA37.

6. תחזוקה

  • Regularly check all screws and joints for tightness. Tighten if necessary to maintain stability.
  • Clean the boom arm with a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Ensure the silicone pad on the desk clamp is free from debris to maintain grip and protect your desk.

7. פתרון תקלות

  • זרוע לא מחזיקה מעמד: Ensure all adjustment knobs and the desk clamp are fully tightened. The arm is designed to hold up to 4.8 lbs (2.2 kg); verify your microphone's weight.
  • Microphone wobbles: Check that the microphone or shock mount is securely screwed onto the arm's thread. Ensure the 3/8" to 5/8" adapter (if used) is also tight.
  • שולחן כתיבהamp slipping: הדקו מחדש את סגירת השולחןamp. Ensure the desktop surface is clean and dry for maximum grip. The silicone pad should be in direct contact with the desk.

8. מפרטים

תכונהפְּרָט
מותגMAONO
מספר דגםBA37
חוֹמֶרסגסוגת פלדה, מתכת
משקל פריט3 פאונד (1.36 ק"ג)
המלצה על משקל מקסימלי5.5 פאונד (2.5 ק"ג)
גובה מקסימלי29.6 אינץ '(75 ס"מ)
טווח אופקי27.6 אינץ '(70 ס"מ)
סוג בסיסUpgraded 4200mm² Surface Area Desk Clamp with Soft Pad
Desk Thickness SupportUp to 2.36 Inches (6.5 cm)
Mount Thread Size3/8" to 5/8" screw adapter
רכיבים כלוליםHeavy-duty microphone scissor arm stand, Upgraded table mounting clamp, 3/8" to 5/8" screw adapter, Cable straps x2

9. אחריות ותמיכה

The MAONO BA37 Microphone Boom Arm comes with a אחריות לשנה from the date of purchase. For warranty claims, technical support, or any questions regarding your product, please contact MAONO customer service through their official webהאתר או הקמעונאי בו נרכש המוצר. אנא שמור את הוכחת הרכישה שלך לצורך אימות האחריות.

© 2026 MAONO. כל הזכויות שמורות.