FLEXISPOT E6 MAX Dual Motor 3 Stages Standing Desk User Manual

מָבוֹא

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 MAX Dual Motor 3 Stages Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

מידע בטיחות

אַזהָרָה:

Exceeding the maximum weight recommendation of 352 pounds may cause damage or pose a safety risk. Ensure the desk is not overloaded. Keep children and pets away from the desk during height adjustments to prevent injury due to the anti-collision function.

תוכן החבילה

לפני תחילת ההרכבה, יש לוודא שכל החלקים קיימים ולא ניזוקו. החבילה כוללת בדרך כלל:

• Whole-piece Desktop (55"x28" Special Walnut)
• Desk Frame (Black) with Dual Motors
• 3-Stage Lifting Columns (2)
• Feet/Bases (2)
• Control Panel with LCD screen and backlit buttons
• מתאם מתח וכבלים
• חומרת הרכבה (ברגים, מפתח אלן)
• Complimentary Accessories: Velcro Straps, Set of Wheels, Cable Manager

Image: All components of the FlexiSpot E6 MAX standing desk laid out for assembly, including the desktop, frame parts, and accessories.

הוראות התקנה

Assembly is straightforward and can typically be completed by one person in approximately 30 minutes. A power drill is recommended for some steps, though a hand screwdriver can also be used.

1. פרק רכיבים: Carefully remove all parts from the two shipping boxes. One box contains the desktop, and the other contains the frame and accessories.
2. Assemble Support Beams: Connect the three pieces of each support beam by sliding the outer sections together and tightening them securely.
3. Attach Lifting Columns: Securely attach the lifting columns to the assembled support beams using the provided Allen wrench and screws. Each side requires four screws.
4. Install Feet/Bases: Screw the feet onto the bottom of the lifting columns using the Allen wrench. Optionally, swap the feet for the included wheels for easier mobility.
5. Position Desktop: Place the desktop upside down on a clean, soft surface. Carefully align the assembled desk frame onto the pre-drilled holes on the underside of the desktop.
6. Install Control Box and Keypad: Mount the control box and keypad to the designated areas on the underside of the desktop using screws.
7. חבר חיווט: Connect all necessary wires from the motors, control panel, and power adapter to the control box. Ensure all connections are secure.
8. ניהול כבלים: Use the included Velcro straps and cable manager to organize and secure all cables neatly under the desk.

Image: The three-stage leg mechanism allows for continuous height adjustment, accommodating various user heights.

Image: Included accessories like Velcro straps, wheels, and a cable manager assist in organizing your workspace.

הוראות הפעלה

Your FLEXISPOT E6 MAX desk features intuitive controls for seamless height adjustment.

התאמת גובה

• The desk adjusts from a minimum height of 24.4 inches to a maximum height of 50 inches.
• השתמש ב- למעלה (▲) ו למטה (▼) arrow buttons on the control panel to manually adjust the desk height.

הגדרות זיכרון ניתנות לתכנות

The control panel features four programmable memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.

1. כוונן את שולחן העבודה לגובה הרצוי באמצעות כפתורי למעלה/למטה.
2. הקש על M כפתור. הצג יציג 'S-'.
3. Immediately press one of the numbered memory buttons (1, 2, 3, or 4) to save the current height. The display will confirm the setting.
4. To recall a saved height, simply press the corresponding numbered memory button. The desk will automatically move to that position.

פונקציה נגד התנגשות

The desk is equipped with a sensitivity mode that detects obstacles during height adjustment. If the desk encounters an object, it will automatically stop and reverse slightly to prevent damage or injury.

Image: The intuitive control panel features an LCD screen, up/down arrows, and four memory settings for quick adjustments.

תַחזוּקָה

תחזוקה שוטפת מבטיחה את אורך החיים והביצועים האופטימליים של שולחן העבודה העומד שלכם.

• ניקוי: נגבו את שולחן העבודה והמסגרת בעזרת מטלית רכהamp מטלית. הימנעו מחומרי ניקוי שוחקים או כימיקלים חזקים שעלולים לפגוע בגימור.
• ניהול כבלים: Periodically check and re-secure cables using the provided Velcro straps or cable manager to prevent tangles and damage.
• בדיקת מנוע: Listen for any unusual noises during operation. If you notice any issues, refer to the troubleshooting section or contact customer support.
• חלוקת משקל: Ensure weight is evenly distributed on the desktop to prevent strain on the motors and frame.

פתרון בעיות

If you encounter issues with your FLEXISPOT E6 MAX desk, try the following common troubleshooting steps:

• שולחן עבודה לא זז: Check all power connections. Ensure the power cable is securely plugged into both the desk and the wall outlet.
• קוד שגיאה בתצוגה: Refer to the specific error code in the full product manual (not provided here) or contact customer support for guidance.
• תנועה לא אחידה: Ensure the desk is on a level surface. Check for any obstructions under the desk that might impede movement.
• פונקציית איפוס: If the desk is unresponsive, unplug it from the power outlet for 10-15 seconds, then plug it back in. This may reset the system.

מפרטים

Image: The desk's robust construction supports up to 330 lbs, providing a sturdy workstation.

Image: Detailed dimensions of the desktop (55"x28") and the adjustable height ranges for the desk frame.

אַחֲרָיוּת

FLEXISPOT offers a comprehensive warranty for your peace of mind:

• 10-Year Coverage: Applies to the desk frame and motors.
• הגנה לשנתיים: Applies to the control panel and electronics.

For any warranty claims or assistance, please contact FLEXISPOT customer support.

תמיכת לקוחות

For further assistance, technical support, or inquiries regarding your FLEXISPOT E6 MAX Standing Desk, please contact the manufacturer directly. Refer to the contact information provided with your product packaging or visit the official FLEXISPOT webאֲתַר.

אתה יכול גם לבקר ב FLEXISPOT Store on Amazon למידע נוסף ומשאבי תמיכה.